DEMODULATORS I&Q LEADLESS SURFACE-MOUNT MODELS FREQUENCY (MHz) LO RF LO LEVEL (dBm) IF CONVERSION LOSS (dB) AMPLITUDE UNBALANCE (dB) PHASE UNBALANCE (Degrees) NOM MAX TYP/MAX TYP/MAX ISOLATION (dB) VSWR INPUT 1 dB COMP. PT. (dBm) INPUT IP3 (dBm) LO/RF MIN LO/IF MIN MAX MIN TYP PACKAGE PIN-OUT (See Below) MODEL 19-21 28.5-31.5 38-42 52-88 57-63 66.5-73.5 10-30 15-45 20-60 52-88 30-90 35-105 DC-10 DC-15 DC-20 DC-35 DC-30 DC-35 +10 +10 +10 +10 +10 +10 7.0 7.0 7.0 7.0 7.0 7.0 0.2/0.4 0.2/0.4 0.2/0.4 0.2/0.5 0.2/0.4 0.2/0.4 1.0/2.0 1.0/2.0 1.0/2.0 2.0/4.0 1.0/2.0 1.0/2.0 40 40 40 40 40 40 35 35 35 35 35 35 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 +3 +3 +3 +3 +3 +3 +15 +15 +15 +15 +15 +15 102S 102S 102S 102S 102S 102S 1 1 1 1 1 1 QMS-201 QMS-202 QMS-203 QMS-210 QMS-204 QMS-205 80-160 100-200 810-830 850-950 869-894 935-960 80-160 100-200 810-830 850-950 869-894 935-960 DC-40 DC-50 DC-50 DC-100 DC-50 DC-50 +10 +10 +10 +10 +10 +10 8.0 8.0 8.0 8.0 8.0 8.0 0.6/1.0 0.6/1.0 0.6/1.0 0.8/1.3 0.6/1.0 0.6/1.0 1.0/3.0 1.0/3.0 1.0/4.0 3.0/6.0 1.0/4.0 1.0/4.0 35 35 35 35 35 35 30 30 30 30 30 30 1.5:1 1.5:1 1.8:1 1.8:1 1.8:1 1.8:1 +3 +3 +3 +3 +3 +3 +15 +15 +15 +15 +15 +15 102S 102S 102S 102S 102S 102S 1 1 1 1 1 1 QMS-206 QMS-207 QMS-214 QMS-213 QMS-224 QMS-234 +10 8.0 0.8/1.2 2.0/6.0 25 20 2.0:1 +3 +15 102S 1 QMS-244 VSWR INPUT 1 dB COMP. PT. (dBm) INPUT IP3 (dBm) PACKAGE 1805-1880 1805-1880 DC-50 MINIATURE SURFACE-MOUNT PACKAGE FREQUENCY (MHz) LO RF LO LEVEL (dBm) IF 935-960 935-960 DC-5 1050 1050 ± 40 DC-40 1710-1780 1710-1780 DC-10 CONVERSION LOSS (dB) AMPLITUDE BALANCE (dB) PHASE BALANCE (Degrees) ISOLATION (dB) NOM MAX TYP/MAX TYP/MAX LO/RF MIN LO/IF MIN TYP MIN TYP +10 +10 +10 8.5 10.0 8.5 0.3/0.7 0.4/0.6 0.45/1.0 2.0/4.0 2.0/5.0 3.0/6.0 35 30 28 30 25 23 1.7:1 1.8:1 1.7:1 +3 +3 +3 +15 +15 +15 Notes: 2 2 2 MODEL VMS-935D VMS-1050D VMS-1710D PIN-OUT TABLE Conversion loss = RF input power (dBm) minus IF1 and IF2 power (dBm). Conversion loss = (I + Q) power (dBm) minus RF power (dBm). IF1 is +90o ref. to IF2 when RF < LO frequency. Nominal impedance = 50 ohms. Maximum RF input power without damage 200 mW. 240 240 240 PIN-OUT (See Below) RF #1 #2 1 1 LO 8 8 IF1 3 11 IF2 4 5 CASE GND All Other All Other For pin location and package outline drawings, see back pages. 201 McLean Boulevard • Paterson, New Jersey 07504 • Tel: (973) 881-8800 • Fax: (973) 881-8361 E-Mail: [email protected] • World Wide Web: http://www.synergymwave.com [ 93 ] DEMODULATORS I&Q THROUGH-HOLE MOUNT 8 PIN - RELAY CAN FREQUENCY (MHz) LO RF LO LEVEL CONVERSION (dBm) LOSS (dB) IF NOM AMPLITUDE UNBALANCE (dB) MAX TYP/MAX PHASE UNBALANCE (Degrees) TYP/MAX ISOLATION (dB) LO/RF MIN LO/IF MIN VSWR MAX INPUT 1 dB COMP. PT. (dBm) INPUT IP3 (dBm) MIN TYP PACKAGE PIN-OUT (See Below) MODEL 19-21 28.5-31.5 38-42 57-63 66.5-73.5 10-30 15-45 20-60 30-90 35-105 DC-10 DC-15 DC-20 DC-30 DC-35 +10 +10 +10 +10 +10 7.0 7.0 7.0 7.0 7.0 0.2/0.4 0.2/0.4 0.2/0.4 0.2/0.4 0.2/0.4 1.0/2.0 1.0/2.0 1.0/2.0 1.0/2.0 1.0/2.0 40 40 40 40 40 35 35 35 35 35 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 +3 +3 +3 +3 +3 +15 +15 +15 +15 +15 102 102 102 102 102 1 1 1 1 1 QMR-201 QMR-202 QMR-203 QMR-204 QMR-205 80-160 100-200 810-830 869-894 935-960 80-160 100-200 810-830 869-894 935-960 DC-40 DC-50 DC-50 DC-50 DC-50 +10 +10 +10 +10 +10 8.0 8.0 8.0 8.0 8.0 0.6/1.0 0.6/1.0 0.6/1.0 0.6/1.0 0.6/1.0 1.0/3.0 1.0/3.0 1.0/4.0 1.0/4.0 1.0/4.0 35 35 35 35 35 30 30 30 30 30 1.5:1 1.5:1 1.8:1 1.8:1 1.8:1 +3 +3 +3 +3 +3 +15 +15 +15 +15 +15 102 102 102 102 102 1 1 1 1 1 QMR-206 QMR-207 QMR-214 QMR-224 QMR-234 1805-1880 1805-1880 DC-50 +10 8.0 0.8/1.2 2.0/6.0 25 20 2.0:1 +3 +15 102 1 QMR-244 PIN-OUT (See Below) MODEL 6 PIN (Wideband) AND 16 PIN FREQUENCY (MHz) LO RF LO LEVEL CONVERSION (dBm) LOSS (dB) IF 124 AMPLITUDE UNBALANCE (dB) PHASE UNBALANCE (Degrees) ISOLATION (dB) NOM MAX TYP/MAX TYP/MAX LO/RF MIN LO/IF MIN 151 VSWR MAX INPUT 1 dB COMP. PT. (dBm) INPUT IP3 (dBm) MIN TYP PACKAGE 15-50 15-510 15-50 15-510 DC-10 DC-250 +10 +10 7.0 7.0 0.3/0.5 0.7/1.5 2.0/5.0 5.0/10 40 35 35 20 1.5:1 2.0:1 +3 +3 +15 +15 151 151 3 3 QMP-15-50 QMP-34-15 19-21 28.5-31.5 38-42 57-63 66.5-73.5 10-30 15-45 20-60 30-90 35-105 DC-10 DC-15 DC-20 DC-30 DC-35 +10 +10 +10 +10 +10 7.0 7.0 7.0 7.0 7.0 0.2/0.4 0.2/0.4 0.2/0.4 0.2/0.4 0.2/0.4 1.0/2.0 1.0/2.0 1.0/2.0 1.0/2.0 1.0/2.0 40 40 40 40 40 35 35 35 35 35 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 +3 +3 +3 +3 +3 +15 +15 +15 +15 +15 124 124 124 124 124 2 2 2 2 2 QMP-901 QMP-902 QMP-903 QMP-904 QMP-905 80-160 100-200 810-830 869-894 935-960 80-160 100-200 810-830 869-894 935-960 DC-40 DC-50 DC-50 DC-50 DC-50 +10 +10 +10 +10 +10 8.0 8.0 8.0 8.0 8.0 0.6/1.0 0.6/1.0 0.6/1.0 0.6/1.0 0.6/1.0 1.0/3.0 1.0/3.0 1.0/4.0 1.0/4.0 1.0/4.0 35 35 35 35 35 30 30 30 30 30 1.5:1 1.5:1 1.8:1 1.8:1 1.8:1 +3 +3 +3 +3 +3 +15 +15 +15 +15 +15 124 124 124 124 124 2 2 2 2 2 QMP-906 QMP-907 QMP-914 QMP-924 QMP-934 1805-1880 1805-1880 DC-50 +10 8.0 0.8/1.2 2.0/6.0 25 20 2.0:1 +3 +15 124 2 QMP-944 PIN-OUT TABLE Notes: IF1 is +90o ref to IF2 when RF < LO frequency. Nominal impedance = 50 ohms. Maximum RF input power without damage 200 mW. Conversion loss = RF input power (dBm) minus IF1 and IF2 power (dBm). [ 94 ] RF #1 #2 #3 1 1 1 LO 8 16 6 IF1 IF2 CASE GND 3 4 3 4 13 2 All Other All Other 4,5 For pin location and package outline drawings, see back pages. 201 McLean Boulevard • Paterson, New Jersey 07504 • Tel: (973) 881-8800 • Fax: (973) 881-8361 E-Mail: [email protected] • World Wide Web: http://www.synergymwave.com DEMODULATORS I&Q FLAT PACK MODELS FREQUENCY (MHz) LO RF LO LEVEL CONVERSION (dBm) LOSS (dB) IF AMPLITUDE UNBALANCE (dB) PHASE UNBALANCE (Degrees) NOM MAX TYP/MAX TYP/MAX ISOLATION (dB) LO/RF MIN LO/IF MIN VSWR MAX INPUT 1 dB COMP. PT. (dBm) INPUT IP3 (dBm) MIN TYP PACKAGE PIN-OUT (See Below) MODEL 19-21 28.5-31.5 38-42 57-63 66.5-73.5 10-30 15-45 20-60 30-90 35-105 DC-10 DC-15 DC-20 DC-30 DC-35 +10 +10 +10 +10 +10 7.0 7.0 7.0 7.0 7.0 0.2/0.4 0.2/0.4 0.2/0.4 0.2/0.4 0.2/0.4 1.0/2.0 1.0/2.0 1.0/2.0 1.0/2.0 1.0/2.0 40 40 40 40 40 35 35 35 35 35 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 +3 +3 +3 +3 +3 +15 +15 +15 +15 +15 115 115 115 115 115 1 1 1 1 1 QMF-201 QMF-202 QMF-203 QMF-204 QMF-205 80-160 100-200 810-830 869-894 935-960 80-160 100-200 810-830 869-894 935-960 DC-40 DC-50 DC-50 DC-50 DC-50 +10 +10 +10 +10 +10 8.0 8.0 8.0 8.0 8.0 0.6/1.0 0.6/1.0 0.6/1.0 0.6/1.0 0.6/1.0 1.0/3.0 1.0/3.0 1.0/4.0 1.0/4.0 1.0/4.0 35 35 35 35 35 30 30 30 30 30 1.5:1 1.5:1 1.8:1 1.8:1 1.8:1 +3 +3 +3 +3 +3 +15 +15 +15 +15 +15 115 115 115 115 115 1 1 1 1 1 QMF-206 QMF-207 QMF-214 QMF-224 QMF-234 1805-1880 1805-1880 DC-50 +10 8.0 0.8/1.2 2.0/6.0 25 20 2.0:1 +3 +15 115 1 QMF-244 COAXIAL CONNECTOR MODELS FREQUENCY (MHz) LO LEVEL CONVERSION (dBm) LOSS (dB) LO RF IF 15-510 15-510 DC-250 19-21 28.5-31.5 38-42 57-63 66.5-73.5 10-30 15-45 20-60 30-90 35-105 80-160 100-200 810-830 869-894 935-960 80-160 100-200 810-830 869-894 935-960 PHASE UNBALANCE (Degrees) ISOLATION (dB) VSWR INPUT 1 dB COMP. PT. (dBm) INPUT IP3 (dBm) LO/RF MIN LO/IF MIN MAX MIN TYP PACKAGE PIN-OUT (See Below) MODEL MAX TYP/MAX TYP/MAX +10 7.0 0.7/1.5 5.0/10 35 20 2.0:1 +3 +15 153 2 QMK-34-15 DC-10 DC-15 DC-20 DC-30 DC-35 +10 +10 +10 +10 +10 7.0 7.0 7.0 7.0 7.0 0.2/0.4 0.2/0.4 0.2/0.4 0.2/0.4 0.2/0.4 1.0/2.0 1.0/2.0 1.0/2.0 1.0/2.0 1.0/2.0 40 40 40 40 40 35 35 35 35 35 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 +3 +3 +3 +3 +3 +15 +15 +15 +15 +15 113 113 113 113 113 2 2 2 2 2 QMK-701* QMK-702* QMK-703* QMK-704* QMK-705* DC-40 DC-50 DC-50 DC-50 DC-50 +10 +10 +10 +10 +10 8.0 8.0 8.0 8.0 8.0 0.6/1.0 0.6/1.0 0.6/1.0 0.6/1.0 0.6/1.0 1.0/3.0 1.0/3.0 1.0/4.0 1.0/4.0 1.0/4.0 35 35 35 35 35 30 30 30 30 30 1.5:1 1.5:1 1.8:1 1.8:1 1.8:1 +3 +3 +3 +3 +3 +15 +15 +15 +15 +15 113 113 113 113 113 2 2 2 2 2 QMK-706* QMK-707* QMK-714* QMK-724* QMK-734* +10 +10 +10 8.0 7.0 9.0 0.8/1.2 0.3/0.5 0.5/1.0 2.0/6.0 2.0/5.0 3.0/6.0 25 17 17 20 20 10 2.0:1 2.0:1 2.0:1 +3 +2 +2 +15 +13 +13 113 153 153 2 2 2 QMK-744* QMK2450A QMK2490A 1805-1880 1805-1880 DC-50 2450 2400-2500 DC-100 3410-3590 3410-3590 DC-100 NOM AMPLITUDE UNBALANCE (dB) 153 113 PIN-OUT TABLE Notes: IF1 is +90o ref to IF2 when RF < LO frequency. Nominal impedance = 50 ohms. Maximum RF input power without damage 200 mW. *Select female connector suffix: S=SMA, B=BNC, N=Type N, T=TNC. All other models numbers are available with SMA connectors only. RF #1 #2 14 3 LO 1 1 IF1 10 2 IF2 CASE GND 5 4 All Other - For pin location and package outline drawings, see back pages. Conversion loss = RF input power (dBm) minus IF1 and IF2 power (dBm). 201 McLean Boulevard • Paterson, New Jersey 07504 • Tel: (973) 881-8800 • Fax: (973) 881-8361 E-Mail: [email protected] • World Wide Web: http://www.synergymwave.com [ 95 ]