RF201L2S Diode Fast Recovery Diode RF201L2S ●Applications General rectification ●Land size figure(Unit : mm) ●Dimensions（Unit : mm） 2.0 ① ② 0.1±0.02 0.1 4.2 PMDS 2.0±0.2 1.5±0.2 ●Construction Silicon epitaxial 5.0±0.3 67 1.2±0.3 6 4.5±0.2 ●Features 1)Small power mold type.（PMDS） 2)Ultra low VF 3)Ultra high switching speed 4)Low switching loss 2.0 2.6±0.2 ●Structure ROHM : PMDS JEDEC : SOD-106 ① ② Manufacture date ●Taping specifications（Unit : mm） 2.0±0.05 4.0±0.1 0.3 12±0.2 5.5±0.05 5.3±0.1 0.05 9.5±0.1 1.75±0.1 φ1.55±0.05 φ1.55 2.9±0.1 4.0±0.1 2.8MAX ●Absolute maximum ratings（Ta=25℃） Parameter Reverse voltage (repetitive) Reverse voltage (DC) Average rectified forward current Forward current surge peak （60Hz・1cyc） Junction temperature Storage temperature Limits 200 200 2 20 150 -55 to +150 Symbol VRM VR Io IFSM Tj Tstg (*1)Mounting on epoxi board. 180°Half sine wave Unit V V A A ℃ ℃ ●Electrical characteristics（Ta=25℃） Parameter Forward voltage Reverse current Reverse recovery time Symbol VF Min. - Typ. 0.815 Max. 0.87 Unit V IF=2.0A Conditions IR - 0.01 10 µA VR=200V trr - 14 25 ns IF=0.5A,I R=1A,Irr=0.25*I R 1/3 Diode RF201L2S 10 1000 150℃ 10000 f=1MHz 1 150℃ 0.1 125℃ 25℃ 0.01 -25℃ 1000 100 25℃ 10 -25℃ 1 0.001 0.3 0.4 0.5 0.6 0.7 0.8 FORWARD VOLTAGE：VF(V) VF-IF CHARACTERISTICS 0.9 850 10 1 0 50 100 150 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 200 0 Ta=25℃ Ta=25℃ VR=200V VR=200V n=30pcs n=30pcs 90 830 AVE:815.3mV 820 810 80 70 60 50 40 AVE:16.6ns 30 20 140 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 840 90 80 70 50 Ct DISPERSION MAP 1000 100 50 Ifsm Ta=25℃ IF=0.5A IR=1A Irr=0.25*IR n=10pcs 25 20 PEAK SURGE FORWARD CURRENT:IFSM(A) AVE:108.0A RESERVE RECOVERY TIME:trr(ns) 1cyc 8.3ms 150 100 60 30 200 AVE:102.3pF 110 IR DISPERSION MAP Ifsm 15 AVE:14.3ns 10 5 8.3ms 8.3ms 1cyc 100 10 0 0 1 trr DISPERSION MAP IFSM DISRESION MAP 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS Mounted on epoxy board 1000 TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) PEAK SURGE FORWARD CURRENT:IFSM(A) Ifsm t 150 100 50 IF=100mA IM=10m A 1m Rth(j-a) time Rth(j-c) 10 1 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100 DC D=1/2 2 Sin(θ＝180) 1.5 1 0.5 0.1 0 2.5 300u 100 100 3 FORWARD POWER DISSIPATION:Pf(W) 200 30 120 0 VF DISPERSION MAP 250 25 f=1MHz VR=0V 130 10 800 5 10 15 20 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 150 100 Ta=25℃ IF=2A n=30pcs REVERSE CURRENT:IR(nA) FORWARD VOLTAGE:VF(mV) 100 0.1 0.2 PEAK SURGE FORWARD CURRENT:IFSM(A) 125℃ 75℃ CAPACITANCE BETWEEN TERMINALS:Ct(pF) REVERSE CURRENT:IR(nA) FORWARD CURRENT:IF(A) 75℃ 0.001 0 0.01 0.1 1 10 TIME:t(s) Rth-t CHARACTERISTICS 100 1000 0 1 2 3 4 AVERAGE RECTIFIED FORWARD CURRENT：Io(A) Io-Pf CHARACTERISTICS 2/3 Diode RF201L2S T DC 3 t VR D=t/T VR=100V Tj=150℃ D=1/2 2 Sin(θ＝180) 1 0 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 0A 0V 4 0A 0V Io DC 4 t T 3 VR D=t/T VR=100V Tj=150℃ D=1/2 2 Sin(θ＝180) 1 25 50 75 100 AMBIENT TEMPERATURE:Ta(℃) Derating Curveﾞ(Io-Ta) 125 150 No break at 30kV 25 20 15 AVE:21.0kV 10 5 0 0 0 30 Io ELECTROSTATIC DISCHARGE TEST ESD(KV) 5 5 0 25 50 75 100 125 150 C=200pF R=0Ω C=100pF R=1.5kΩ CASE TEMPARATURE:Tc(℃) Derating Curveﾞ(Io-Tc) ESD DISPERSION MAP 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0