EMP11 Diodes Switching diode EMP11 zApplication Ultra high speed switching zDimensions (Unit : mm) zLand size figure (Unit : mm) 1.0 0.5 0.5 1.6±0.1 0.22±0.05 (5) (4) 0.25 0.15 0.3 0.15 0.25 1.2±0.1 zConstruction Silicon epitaxial planar (1) (2) 0.5 0.5 1.6±0.1 0.45 (6) 0.13±0.05 1.55 zFeatures 1) Ultra small mold type. (EMD6) 2) High reliability 0.4 0～0.1 EMD6 (3) zStructure 1.0±0.1 0.5±0.05 ROHM : EMD6 JEITA : SC-75A Size dot (year week factory) 1.65±0.1 5.5±0.2 0~0.1 3.5±0.05 8.0±0.2 φ0.8±0.1 1PIN 4.0±0.1 0.3±0.1 1.65±0.01 +0.1 φ1.5 −0 4.0±0.1 2.0±0.05 1.7±0.05 1.75±0.1 zTaping specifications (Unit : mm) 0.65±0.1 zAbsolute maximum ratings (Ta=25°C) Parameter Reverse voltage (repetitive peak) Reverse voltage (DC) Forward current (Single) Average rectified forward current (Single) Surge current （t=1us） Power dissipation Junction temperature Storage temperature Limits 80 80 300 100 4 150 150 -55 to +150 Symbol VRM VR IFM Io Isurge Pd Tj Tstg Unit V V mA mA A mW ℃ ℃ zElectrical characteristics (Ta=25°C) Parameter Forward voltage Reverse current Capacitance between terminals Reverse recovery time Symbol VF IR Ct Min. - Typ. - Max. 1.2 0.1 3.5 Unit V µA pF trr - - 4 ns Conditions IF=100mA VR=70V VR=6V , f=1MHz VR=6V , IF=5mA , RL=50Ω Rev.D 1/2 EMP11 Diodes zElectrical characteristic curves (Ta=25°C) Ta=150℃ 10000 Ta=75℃ Ta=25℃ Ta=150℃ Ta=-25℃ 1 Ta=75℃ 100 10 Ta=25℃ 1 Ta=-25℃ 0.1 0 100 200 300 400 500 600 700 800 900 1000 FORWARD VOLTAGE：VF(mV) VF-IF CHARACTERISTICS 20 30 40 50 60 70 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 80 0.1 0 880 870 860 AVE:870.1mV 850 80 70 60 50 40 30 20 AVE:4.310nA 8.3ms 10 AVE:2.50A 3 AVE:1.831pF 2 Ct DISPERSION MAP 5 Ta=25℃ VR=6V IF=5mA RL=50Ω n=10pcs 9 8 7 6 5 4 3 2 1 Ifsm 4 8.3ms 8.3ms 1cyc 3 2 1 AVE:1.93ns 0 1 IFSM DISPERSION MAP trr DISPERSION MAP 1000 t 10 1 TIME:t(ms) IFSM-t CHARACTERISTICS 100 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 10 Rth(j-a) 9 Rth(j-c) 100 Mounted on epoxy board IF=10mA IM=1mA 1ms time 300us 10 0.001 ELECTROSTATIC DISCHARGE TEST ESD(KV) Ifsm TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) 100 10 4 0 0 0 1 5 1 PEAK SURGE FORWARD CURRENT:IFSM(A) RESERVE RECOVERY TIME:trr(ns) 1cyc Ifsm 0.1 6 0 10 5 7 IR DISPERSION MAP 20 15 8 10 VF DISPERSION MAP 20 Ta=25℃ VR=6V f=1MHz n=10pcs 9 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 890 5 10 15 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 10 Ta=25℃ VR=70V n=10pcs 90 REVERSE CURRENT:IR(nA) FORWARD VOLTAGE:VF(mV) 10 100 900 Ta=25℃ IF=100mA n=30pcs 1 0.01 0.001 0 PEAK SURGE FORWARD CURRENT:IFSM(A) f=1MHz CAPACITANCE BETWEEN TERMINALS:Ct(pF) 10 0.1 PEAK SURGE FORWARD CURRENT:IFSM(A) 10 Ta=125℃ 1000 Ta=125℃ REVERSE CURRENT:IR(nA) FORWARD CURRENT:IF(mA) 100 8 7 6 5 3 AVE:1.47kV 2 1 0 0.1 10 TIME:t(s) Rth-t CHARACTERISTICS AVE:2.98kV 4 C=200pF R=0Ω C=100pF R=1.5kΩ 1000 ESD DISPERSION MAP Rev.D 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0