Expandable Solution with Outstanding Eco Performance— Your

Digital Multifunctional System
Expandable Solution with Outstanding Eco Performance—
Your Ideal Partner in Growth
OPTION
Catering to the Changing Needs
of Growing Businesses
Any business in need of an energy-efficient partner that can keep pace with changing document
demands should look no further than the configure-friendly MX-M564N/M464N/M364N.
Along with multifunction efficiency—including full-colour network scanning—this B/W A3
solution offers advanced environmental performance and easy expandability. Flexible system
configurations allow the MX-M564N/M464N/M364N to accommodate nearly any type of business.
There’s a space-efficient inner finisher for workplaces with limited room, a 4,000-sheet finisher for
offices handling high-volume jobs, and saddle stitch finishers for businesses requiring complex
document finishing, like that needed for pamphlet making.
The MX-M564N/M464N/M364N also supports the Sharpdesk
Mobile print/scan application for conducting business on the go and
ensures the reliable safeguarding of business communications through
built-in and add-on security functions.
Productive Performance
Already designed to maximize productivity, the MX-M564N/M464N/M364N becomes
even more of a workhorse when the optional 500 + 2,000-sheet paper drawer is
added on, boosting total paper capacity to 6,600 sheets. A variety of finishing
options, including a 4,000-sheet finisher and two types of saddle stitch finishers,
makes for attractive and efficient document finishing. And a 100-sheet RSPF
(reversing single pass feeder) ensures the fast and smooth handling of one- or
two-sided originals.
1
Eco Friendliness
The MX-M564N/M464N/M364N gets its eco edge from advanced environmental technologies incorporated throughout
the MFP—from its hardware and electrical system down to its software and supplies. Even its short warm-up time of 12
seconds produces substantial energy savings.
The new Mycrostoner-CAP is one of those eco-boosting supplies. The low melting point of this proprietary toner
lets it get the job done with less energy than conventional toner requires.
And this dramatically reduced power consumption is what gives the MX-M564N/M464N/M364N one of the lowest
TEC values*1 in the industry—significantly lower than even the maximum values allowable under ENERGY STAR®.
Lower TEC Value
MX-M564N
54.8%
Max. allowable
TEC value*2
3.4 kWh*3
Shorter
Warm-Up Time*4
6.2 kWh
12 seconds
40.0 %
MX-M464N
59.5%
2.5 kWh*3
4.2 kWh
MX-M364N
64.5%
2.0 kWh*3
3.1 kWh
down
*1 Typical amount of energy consumed in a hypothetical week measured as stipulated under the ENERGY STAR® programme.
*2 Maximum TEC value allowable under the latest ENERGY STAR programme (version 2.0).
*3 Measured at 230V.
*4 Compared to MX-M502N/M452N/M362N (warm-up time 20 seconds).
Ease of Use
The MX-M564N/M464N/M364N is equipped with a 7.0-inch WVGA
touchscreen colour LCD that provides easy navigation of MFP functions and
settings. The LCD also shows thumbnail displays and data file previews,
raising the bar on user friendliness. A retractable QWERTY keyboard option
offers added convenience.
Thumbnails*
Preview*
* Copy previews are in B/W.
2
COPYING & NETWORK PRINTING
PRODUCTIVE
Super-Efficient Output
Professional-Looking Finishing
The MX-M564N/M464N/M364N delivers a fast output of
56*1/46/36 cpm/ppm*2. And the first copy comes out in just
3.7/3.9/4.5 seconds to save valuable time when performing
multiple short-run jobs.
The MX-M564N/M464N/M364N offers plenty of finishing options
to suit a variety of workplaces and applications. For basic
sorting/stapling of documents of up to 50 sheets, two types of
handy finishers are available: the space-efficient Finisher can be
added on without taking up much room, while the large-capacity
Finisher has output trays that can hold up to 4,000 sheets.
Saddle Stitch Finishers also come in two types: one has an
output tray capacity of up to 1,000 sheets, while the other boasts
a capacity of up to 4,000 sheets. In addition to basic
sorting/stapling, both types of Saddle Stitch Finishers can
fold/staple documents of up to 15 sheets to make completed
booklets. Punch Modules, which punch holes in documents for
easy filing, are available for each finisher.
*1: 51 cpm/ppm for MX-M564N when
equipped with MX-FN10.
*2: A4 (8 1/2" x 11"), long-edge feeding
56
46
36
CPM
PPM
CPM
PPM
CPM
PPM
MX-M564N MX-M464N MX-M364N
Built-In Duplex Module and RSPF
The MX-M564N/M464N/M364N can make two-sided copies
and printouts using its built-in stackless duplex module,
effectively reducing paper costs as well as saving filing space.
Duplex copying is even more effective when the duplex module is
used together with the
standard-equipped
100-sheet RSPF (reversing
single pass feeder), which
efficiently feeds in one- or
two-sided originals and can
also simultaneously scan
paper of different sizes.
Space-efficient Finisher
The MX-M564N/M464N/M364N easily handles large-volume copy
jobs exceeding the RSPF’s 100-sheet*1 capacity. For example, a
270-sheet original can be scanned as batches of 100 + 100 + 70
sheets and automatically stored on the MX-M564N/M464N/
M364N’s hard disk*2. Users can then print the entire document in
a single run.
*1: A4 (8 1/2" x 11"), 80 g/m2
*2: The number of pages that can be stored for the Job Build function
depends on the machine’s HDD capacity and other conditions.
Extra Paper Capacity
For high-volume work, the
MX-M564N/M464N/M364N can
accommodate an optional stand
with 500 + 2,000-sheet paper
drawer for a total capacity of
6,600 sheets. When a tray runs
out of paper, the Auto Tray
Switching function automatically
switches to another paper tray filled with the same size paper,
allowing you to do extra-large volume jobs without worry.
Stapling
Hole punching
Saddle stitching
Network Tandem Function
When two MX-M564N/M464N/M364Ns are connected to the
same office network, you can use both simultaneously to double
copying/printing output to up to 112/92/72 cpm/ppm.
Large-volume jobs can be completed with ease, enabling you to
meet tight deadlines.
Supports Most Office Environments
• The MX-M564N/M464N/M364N works with the latest and most
commonly used versions of Windows®, Windows Server®, and
Mac operating systems and network protocols—including
IPv6—even in mixed OS environments. You get fast, powerful
network printing via the 1000Base-T Gigabit Ethernet standard.
• The MX-M564N/M464N/M364N supports the PCL6 printer
language. For compatibility with PostScript® 3™, the MX-PK11
PS3 Expansion Kit is available.
Ethernet
(10Base-T/100Base-TX/1000Base-T)
Long-Paper (Banner) Printing*
The optional Long Paper Feeding
Tray accommodates extra-long
paper up to 1,200 mm—expanding
the range of print products to
include panoramic pictures, large
display-window ads, banner signs,
and more.
3
4,000-sheet Saddle
Stitch Finisher
Job Finishing Samples
Job Build for Large-Volume Scanning
* Contact a Sharp customer representative
for details on using this function.
1,000-sheet Saddle
Stitch Finisher
Windows®
Macintosh
Print
Windows Server®
(Image)
: Copy
: Print
: Scan
SUPERB IMAGE QUALITY
High-Resolution Output
The MX-M564N/M464N/M364N’s digital smoothing technology
enhances the 600-dpi print and copy resolution to the equivalent of
9,600 x 600 dpi for incredibly smooth reproduction of fine lines.
Fine-grained photographs, detailed illustrations and graphs, and
small text come out crisp and clear.
Stable Halftones and Smooth Gradations
Halftone process control employs an image density sensor to
enhance the stability and accuracy of halftones, thereby bringing
consistently high image quality to copy/print jobs. Meanwhile,
4-bit depth, rated at 600 dpi resolution, generates fine dots and
rich greyscales that provide smooth gradations.
Automatic Screen Frequency Selection
Enhanced Scan Performance
A function of Auto Colour Mode, the automatic suppression
of unnecessary background colour is essential to achieving
crisp, clear, natural-looking images. The MX-M564N/
M464N/M364N provides enhanced background suppression
without losing colour balance, resulting in scanned images
that closely match the original.
Auto Colour Mode
TEXT
Text comes out crisp and clear,
and unnecessary background
colour is automatically removed
PHOTO
Original
Auto recognition
For enhanced image quality, the MX-M564N/M464N/M364N can
automatically analyse the contents of each page and adjust the
screen frequency (lines per inch) according to the most prominent
element: text, photos, or graphics.
Scanned image
VERSATILE OPERATION
Direct Printing*
Other Key Features
The MX-M564N/M464N/M364N can print PDF, TIFF, JPEG, XPS,
and other files without using the printer driver. And there’s a USB
port beneath its control panel, which comes in handy when
printing data directly from USB memory devices—an indispensable
function for users who are in a hurry or who want quick machine
access without a PC.
* Direct PDF printing requires optional MX-PK11, and direct XPS printing requires
optional MX-PUX1 and 2GB of extra memory.
Copy & Print
• Watermark prints a user-selected watermark, such as
“Urgent,” on each page to indicate the status of the document.
• Tab Copy / Tab Print can copy or print directly onto tabs on
document separators and insert them into assigned positions.
• Multi-Shot copying and N-up printing
• Pamphlet Style copying/printing
• Multi-Page Enlargement copying/printing
• Cover/transparency insertion
Print
USB memory
Network folder
FTP server
Versatile Paper Handling
The MX-M564N/M464N/M364N accommodates a wide range of
paper sizes, from A5 (5 1/2" x 8 1/2") to A3 wide (12" x 18"). It
can also handle heavy paper up to 300 g/m2 thick, further
expanding the range of printing applications.
Image Editing Functions
The MX-M564N/M464N/M364N includes various editing functions
made possible by digital technology.
• Photo Repeat places multiple copies of an image onto a single
sheet.
• Mirror Image makes a reverse image of the original.
• XY Zoom adjusts the horizontal and vertical ratios independently.
• B/W Reverse reverses the black and white of an image.
• Carbon Copy Print mode automatically outputs multiple
printouts of the same data on plain and/or coloured paper;
convenient for invoices and purchase orders.
• Form Overlay can store office document formatting such as
letterheads and overlay contents, eliminating the need for
pre-printed paper. (PostScript driver only)
• Barcode font compatibility*1
*1: Requires optional MX-PF10.
Copy
• Book Copy is convenient for compiling copies of a book or
bound originals into pamphlet format.
• Card Shot enables one-touch copying of both sides of a card
(credit cards, ID cards, etc.) onto a single page.
• Stamp labels your copies with page numbers, the date, or text
such as “Urgent.”
• Mixed Size Original Copy mode automatically distinguishes
documents of mixed sizes*2 (such as A3/B4, B4/A4, etc.) fed
through the RSPF and chooses the appropriate paper.
*2: Some restrictions apply when combining paper sizes of different format series.
4
IMAGE SENDING
: Print
: Scan
: Fax
A3 Colour Network Scanning
High-Speed Faxing
The MX-M564N/M464N/M364N works as a full-colour network
scanner and supports TIFF, PDF, PDF/A, encrypted PDF, JPEG, and
XPS file formats. Converting any type of paper-based document, up
to A3 (11" x 17") in size, into an editable digital file is as easy as
making a copy. Enhanced scan performance improves the legibility
of extremely fine text and allows vivid colour reproduction in
scanned documents. And Auto Colour Selection chooses the right
mode for scanning originals containing both colour and B/W pages.
The optional MX-FX11 Fax Expansion Kit turns the MX-M564N/
M464N/M364N into a 33.6 Kbps Super G3 fax machine. Quick
On-Line Transmission initiates dialling and transmitting as soon as
a page is scanned into memory. JBIG compression technology lets
the MX-M564N/M464N/M364N send an A4 (8 1/2" x 11") size
page in under three seconds*. And using the 100-sheet RSPF gives
faxing efficiency a further boost. Incoming faxes are also handled
with automated ease. The number of copies to be made can be
specified on the LCD control panel’s Fax Output setting, and
optional finishing options can be installed for automatic stapling
of those copies.
Quick Scanning
For both colour*1 and B/W documents, the MX-M564N/M464N/
M364N carries out scanning at 56 opm*2 (originals per minute)
and can complete large scan jobs with ease and efficiency.
* Based on Sharp’s standard chart with approximately 700 characters (A4 or
8 1/2" x 11" long-edge feeding) at standard resolution.
*1: Faxing is available in B/W only. *2: Single-side scanning
PC-Fax/PC-Internet Fax
Skip Blank Page Function
Directly send a document created on your PC to a recipient’s fax
machine via a phone line or the Internet without printing to paper.
Save time and paper costs while retaining original document quality.
When printing* or scanning a multi-page document, the
MX-M564N/M464N/M364N recognises and skips any pages
without content, reducing both data size and transmission time
and helping to save paper.
Note: PC-Internet Fax requires optional MX-FWX1; PC-Fax requires MX-FX11.
* Not including direct printing.
Economically send and receive faxes to and from other ITU-T
T-37-compliant Internet fax machines via the Internet. The
MX-M564N/M464N/M364N supports Direct SMTP; outgoing
Internet faxes do not go through your mail server, making
transmission faster and cheaper.
Multiple Distribution of Scanned Files
With the touch of a few on-screen buttons, you can choose
different ways to distribute your scanned documents. Scan to
E-mail sends documents as an e-mail attachment. Scan to FTP
Server scans documents directly to an FTP server for storage. Scan
to Desktop sends scanned documents directly to your PC
desktop. Scan to Network Folder (SMB) sends files to a shared
folder on a networked Windows PC. Scan to USB Memory scans
documents directly to USB memory devices. And Scan to Fax
enables conventional faxing or Internet faxing.
Document
Scan
Scan to
Internet
Client PCs
Super G3 fax
Note: Requires optional MX-FWX1.
Paperless Faxing with Inbound Routing
Paperless faxing with inbound routing lets you check incoming
faxes via e-mail before printing. It can also forward incoming faxes
to another fax/Internet fax machine, an FTP server, a network
folder (SMB), or a PC desktop. Files can be saved in either PDF or
TIFF (single/multi).
Internet fax
E-mail
External memory
Internet Fax
Network folder
FTP server
Desktop
Other Key Features
Scan & Fax
• One-touch auto dial keys register up to 1,000 numbers for
frequently used destinations
• Broadcast transmission to up to 500 destinations
• Program keys (up to 48 keys) are available to set up
frequently used transmissions for instant recall
• Easy text entry* lets you enter addresses, file names, subject
titles or messages from the LCD control panel
* Only addresses can be entered for faxing.
LDAP Support
Built-in LDAP (lightweight directory access protocol) support
eliminates the need to enter or register full addresses. When you
enter the first few letters of the
recipient’s name, the MFP displays a
list of possible matches from your
company’s LDAP server. Selected
addresses can be stored to the MFP’s
address book.
5
• Mixed size original scanning automatically distinguishes
documents of mixed sizes fed through the RSPF
Fax
• Duplex transmission/reception sends and prints out
two-sided documents
• SD memory card backup ensures documents remain safely
backed up in memory, even in the event of a power failure
• Rotation transmission/reception rotates incoming and
outgoing faxes to match the direction of the printing paper
• Fax destination confirmation allows users to reconfirm fax
numbers before sending to prevent transmission errors
DOCUMENT MANAGEMENT
Document Management on the Hard Disk
You can save processed job data in designated folders on the MX-M564N/M464N/M364N’s built-in hard disk, making it easy to instantly
recall saved documents or jobs for printing and sending at a later time. This contributes greatly to efficient sharing and distribution of
information in your business operations.
COPY
SCAN
Quick File
Folder
Main
Folder
Custom
Folder
Resend
To e-mail or FTP
Fax or Internet fax*1
Reuse
A
PRINT
MFP‘s hard disk
Print Out
B
FAX
C
*1: These functions require their
respective options. See page 5 for details.
Quick Filing
Advanced Filing Function
Up to 10,000 pages or 1,000 files*2 that have
been copied, printed, scanned, or faxed*3 can be
stored by job in a Quick File Folder. You can easily
reuse saved data without having to reload or
rescan the original.
Up to 20,000 pages or 3,000 files*2 that have been copied, printed, scanned, or faxed*3
can be stored by job on the hard disk in up to 1,000 folders with customised names and
locations. Enhanced security features require users to enter a 5- to 8-digit password to
access secure folders, protecting your sensitive data. Storage options include Main Folder
for workgroup sharing and Custom Folder for enhanced-security archiving.
*2: Storage capacity will vary depending on the type of document and the scan settings.
*3: For fax and Internet fax jobs, only transmitted data (not received faxes) can be saved in the Document Filing function.
Easy Access to Stored Files
Easy Sharing of Application Files
Documents stored on the hard disk can be quickly and easily
searched and accessed from the control panel’s LCD via
thumbnail displays and file previews or through a Web browser.
To facilitate file sharing across the office network, the MFP
provides 120GB of hard disk storage space for folders. Each
folder can hold up to 500 files created with applications such as
Word and Excel® and saved in their original format.
Note: Sharp recommends backing up data saved to the MFP’s hard disk.
File creator
Search results
Other users
Saved
Web access screen
Document is saved to MFP
in original file format
Retrieve
User retrieves file
from MFP
Stored on MFP’s hard disk
Search
Edit
Sharpdesk for Total Document Management
Sharpdesk is an original Sharp application that provides integrated desktop
management of documents in over 200 file formats, including scanned
paper-based documents and those created with popular applications such as
Word. It allows you to organise, edit, search, and distribute your documents,
all with simple drag-and-drop operation.
• Intuitive desktop display features thumbnail viewing
Word
View
Store
Excel®
Compose
PowerPoint®
• Sharpdesk Imaging provides annotation tools for paper-free proofreading
• Sharpdesk Composer combines different types of files into a single
document
• Optical character recognition converts documents into editable text files
• Output zone distributes files to e-mail, printers, and other applications
• File search allows searching by file name, keyword, or thumbnail
Print
PC-Fax
E-mail
OCR
ICT*
Output zone
PDF
Scanned
image
etc.
Search screen
* Image Compression Tool for converting images into compact PDF files
Sharp OSA Network Scanner Tool
This client-based scan-to-desktop option is the ideal document management system for small workgroups or offices
that don’t have servers. Sharp OSA Network Scanner Tool provides centralised scan/print user profiles to give everyone
in the office easy one-touch scanning to their PC from any networked MFP—without complicated settings. Scanned
documents can be quickly and easily printed, filed, previewed, shared, and stored to save time and improve document
workflow. And Sharp OSA Network Scanner Tool automatically names PDF files based on scanned-document titles
and can convert scanned documents into text with the OCR engine to create searchable PDF files.
Note: Requires optional MX-AMX2.
6
SECURITY
Industry-Leading Multi-Layered Security
Designed to protect your business assets and bring you peace of mind, Sharp’s industry-leading security solutions employ multiple levels of
security functions—both standard equipped and optional—covering a broad range of network and data security needs. The MX-M564N/
M464N/M364N safeguards sensitive data with powerful, enhanced security functions that eliminate the worry of unauthorised use and
guarantee greater protection for your confidential information.
STANDARD
Secure Network Access
Data Encryption and Overwriting
The IP/MAC address filtering function provides highly secure
Digital copier/printers and MFPs retain large amounts of data
operation by restricting access to the MFPs on your office network.
generated from copy/print/scan/fax jobs in internal storage. To
Only PCs that have either their IP address or MAC (media access
safeguard confidential data from unauthorised access,
control) address registered are allowed to use the MFPs.
standard-equipped security features on the MX-M564N/M464N/
Attempted access from an
M364N automatically encrypt job
Address Filtering
Data Security System
Prevention of
unknown IP or MAC address
data prior to saving it to internal
Data Leaks
will be denied, preventing
storage. Once a job is finished,
Copy Data
Print Data
OK
unauthorised use. The
that encrypted data is erased via
Scan Data
Fax Data
MX-M564N/M464N/M364N
up to seven automatic overwrites.
also supports the IEEE
Protection of administrator/
d0bN%
NO!
ET
=5!”//?
802.1X standard for
file/folder passwords brings
CR
E
PS
hj5&4
TO
Data generated for
port-based network access
further peace of mind.
mk9#¥
each job is
Unknown IP or MAC
control, which blocks all
Note: Contact a Sharp customer
automatically erased
addresses will be
once that job is
representative for details on activating
Data Encryption Data Erasure
access from unauthorised
denied access.
finished.
these security functions.
devices.
User Authentication
IPv6 and IPsec Support
The MX-M564N/M464N/M364N prevents unauthorised use by
requiring passwords for machine access. This safeguarded
solution can register up to 1,000 users in three access levels as
Administrator, User, or Guest and can designate to which function
user authentication applies.
And the MX-M564N/M464N/
M364N works with an
external Active Directory
server to extend user
authentication to multiple MFPs
and a greater number of users.
The MX-M564N/M464N/M364N supports the IPv6 Internet
protocol. An obligatory part of IPv6 is IPsec (IP Security), a set of
protocols for securing Internet protocol (IP) communications. IPsec
encrypts and authenticates traffic between specified parties, giving
IPsec-compatible products an extremely high level of network
security.
User authentication
Encrypted PDF with Password Protection
To prevent unauthorised viewing of confidential data, the
MX-M564N/M464N/M364N enables scanned PDF data to be
password protected and encrypted for transmission over the
network. After transmission, viewers can gain access to the
encrypted PDF only after re-entering the password.
*****
d0bN%
=5!”//?
hj5&4
mk9#¥
MFP encrypts
the scanned data
Requests password entry
for viewing the file
Data Initialisation
The MX-M564N/M464N/M364N’s initialisation function allows
confidential information to be erased at the administrator’s
discretion via the MFP’s system setting. Initialising an MFP when it’s
time to replace it prevents important resources, such as customer
information and intellectual property, from leaking out and
provides considerable peace of mind.
OPTION
Document Control Function
Document Control prevents unauthorised copying, scanning,
faxing, and filing of confidential documents by embedding copy
prevention data onto a document. When that data is detected,
any unauthorised attempts to copy will be cancelled or will result
in only blank-page output.
Note: Requires optional Data Security Kit. May not work for certain types of
documents or paper.
Example: Unauthorised copying
Secure Sockets Layer
SSL (secure sockets layer) enables the encryption of data
communications to prevent data leakage through the network
when printing via IPP, browsing secure Web pages (HTTPS), or
communicating via e-mail (SMTP and POP3) or FTP (FTPS).
7
ABC
Confidential document
with copy prevention data
Unauthorised attempt
to make a copy
Results in a blank page
DEVICE MANAGEMENT
Web-Based System Settings
Network Utility Software
Administrators can manage every important setting—including
user access and security as well as other controls and
configurations—through a standard Web browser right from their
desktops.
Sharp Remote Device Manager* (SRDM) gives administrators
centralised control of their networked MFPs through a standard
Web browser, making device cloning and other operations easier
and more accessible.
* Contact a Sharp customer representative for availability and other details.
Remote Diagnosis
The MX-M564N/M464N/M364N can be monitored remotely
through a Web browser, letting administrators handle tasks before
they become problems. And when action or maintenance is
required, the E-Mail Status and Alert function notifies
administrators via timely e-mail alerts.
Remote Operation
The Remote Operation function lets you display the MFP’s main
control panel on your PC screen, allowing you to operate every
major function directly from your desktop.* This function also
enables the administrator to guide an MFP user through necessary
procedures and allows remote MFP operation from a wheelchair.
* Requires VNC application.
EASE OF USE
7.0-Inch Touchscreen LCD
Thumbnail Display and Previews
The MX-M564N/M464N/M364N’s control panel features a wide,
clear, WVGA-resolution touchscreen LCD. Easy-to-follow guidance
puts step-by-step instructions on the LCD to guide you through all
the necessary procedures for staple/sort finishing, pamphlet
making, and other functions.
Displaying thumbnails and up-close previews of Document Filing
data files along with file names on the MX-M564N/M464N/
M364N’s LCD makes searching for files easy and convenient. It can
also prevent errors by allowing users to confirm finishing options,
scan settings, and other such items before copying, scanning, or
saving documents to the MFP’s hard disk. Thumbnails and
previews of incoming faxes and Internet faxes can also be
displayed on the LCD to help users decide which documents to
print out or forward to others.
Saddle stitching (preview)
2-in-1 copying (preview)
Retractable Keyboard (option)
A full-size retractable QWERTY
keyboard slides out from beneath
the control panel to make text input
fast and easy: convenient for typing
things like e-mail addresses and
messages, as well as passwords for
user authentication.
Job Status Screen
Whether printing or copying, the control panel displays a list of all
jobs, showing you at a glance the jobs in progress and the position
of your job in the queue. And, with a few quick touches of the
LCD screen, the Priority Printing function lets you easily change
the job queue order or delete jobs that are no longer needed.
Easy-Grip Handles
Easy-grip handles on the MX-M564N/M464N/M364N reflect a
universal design that allows the paper drawers to be grasped from
the top as well as the bottom for easy opening and closing.
Job status
8
ENVIRONMENT-FRIENDLY
Outstanding Energy Efficiency
• Sharp’s belt fusing system reduces energy consumption and as a
result, shortens the MX-M564N/M464N/M364N’s warm-up time
to 12 seconds.
• Based on prior usage patterns, the
MX-M564N/M464N/M364N automatically
determines the optimal length of time to let
elapse before going into auto power
shut-off mode, helping reduce overall power
consumption. And pressing the power save
key after a job is finished immediately puts
the MFP into auto power shut-off mode for
further cutbacks on running costs.
• Eco Scan function saves energy
by keeping the fusing system
shut down during jobs that don’t require its use, such as Image
Sending and Document Filing.
Power save key
• Power ON/OFF Schedule function automatically turns the
MX-M564N/M464N/M364N on or off according to time
schedules set by the administrator.
Power off
Power on
9:00
Start of day
Off
On
12:00
13:00
Lunch break
• Energy-efficient LED lamps
employed in the scan unit
(instead of conventional xenon
lamps) provide further energy
savings.
Off
17:00
End of day
Eco-Friendly Supplies
Shell (resin)
• Mycrostoner-CAP toner
Core
(low-melting-point material)
particles are in capsule form,
Pigments and waxes
and each capsule is filled with
low-melting-point material.
(Image)
That gives Mycrostoner-CAP
a lower melting point than
Mycrostoner-CAP
conventional toner and
allows it to fuse at lower temperatures, resulting in reduced
energy consumption and lower TEC values for the MFP.
• Longer-life supplies (drum unit, developer, service parts)
contribute to resource savings.
EXPANDABILITY
Sharp OSA* (Open Systems Architecture)
Sharpdesk Mobile*
Innovative Sharp OSA technology allows you to interact with
critical business and network applications right from the LCD
control panel, offering a new realm of control and convenience.
And since Sharp OSA utilises industry-standard network protocols,
the MX-M564N/M464N/M364N can easily integrate with
document management systems, enterprise resource planning
software, workflow applications, and more. The latest version of
Sharp OSA can reach beyond the firewall, enabling extensive
system construction and services over the Internet. Sharp OSA
brings benefits such as reducing the costs associated with system
implementation and management, as well as enabling data
sharing across company branch offices or subsidiaries—effectively
enhancing total business efficiency.
Sharpdesk Mobile is a mobile print/scan application that combines
the convenience of mobile devices and the efficiency of Sharp MFPs
to make conducting business on the go easier than ever. Documents
scanned on a Sharp MFP can be sent to a mobile device to preview
and save. Documents saved on a mobile device can be printed out
on the MFP, sent as e-mail attachments, or used in other
applications.
* Availability varies by country/region. For details, see the Sharpdesk Mobile
support Web site:
http://sharp-world.com/products/copier/docu_solutions/mobile/sharpdesk_mobile/
Collaborate with
other applications
Network
* Requires optional MX-AMX2 and/or MX-AMX3.
Other
apps
Receive
scanned data
Communication
beyond the firewall
Mobile
device
Attach data to
e-mail
Wireless
LAN
Internet
Sharp MFP
Direct print
from MFP
Sharpdesk Mobile
9
Attach to
e-mail
OPTIONS
System Configuration
MX-KB14 N
Keyboard
MX-FN10
MX-TR13 N
Saddle Stitch
Finisher
Exit Tray Unit
MX-FN17
Finisher
MX-LT10
Long Paper Feeding Tray
MX-FX11
Fax Expansion Kit
MX-FN11
Finisher
MX-LC11
BASE UNIT
MX-RB22
Large Capacity Tray (A4)
Paper Pass Unit
MX-PNX6A/
B/C/D
MX-FN18
Saddle Stitch
Finisher
Punch Module
MX-DE12
Stand with
500-Sheet
Paper Drawer
MX-PN11A/B/C/D
AR-SU1
MX-PNX5A/B/C/D
MX-FWX1
Punch Module for MX-FN17
Punch Module for MX-FN10
MX-US10/50/A0
MX-PF10
MX-UN01A/05A
Sharp OSA Network Scanner Tool
100-License Kit
Sharpdesk 1/5-License Kit
MX-AMX1
Sharpdesk 10/50/100-License Kit
Sharp OSA Network Scanner Tool
1/5-License Kit
Max. stapling capacity
Staple position
A3W (12" x 18") to A5 (5 1/2" x 8 1/2")*1
A3 (11" x 17") to B5*2 (8 1/2" x 11")
500 sheets (A4 or smaller),
250 sheets (B4 or larger)
50 sheets (A4 or smaller), 30 sheets (B4 or larger)
3 locations (front, rear or both)
Non offset
Offset/staple
Saddle stitch
Offset tray
Saddle stitch tray
Max. stapling capacity
Staple position
A3W (12" x 18") to A5 (5 /2" x 8 /2")*
A3 (11" x 17") to B5 (8 1/2" x 11")
A3 (11" x 17"), B4 (8 1/2" x 14"), A4 (8 1/2" x 11")*3
1,000 sheets (A4 or smaller),
500 sheets (B4 or larger)
10 sets of 11–15 sheets, 15 sets of 6–10 sheets,
20 sets of 1–5 sheets
50 sheets (A4 or smaller), 25 sheets (B4 or larger)
3 locations (front, rear or both)
1
1
1
MX-FN11 Finisher
Max. paper capacity
Non offset
Offset/staple
Upper tray
Lower tray
Max. stapling capacity
Staple position
A3W (12" x 18") to A5 (5 1/2" x 8 1/2")*1
A3 (11" x 17") to B5*2 (8 1/2" x 11")
1,550 sheets (A4, 8 1/2" x 11")
2,450 sheets (A4, 8 1/2" x 11")
50 sheets (A4 or smaller),
30 sheets (A4*4, B4 or larger)
3 locations (front, rear or both)
MX-FN18 Saddle Stitch Finisher
Paper size
Max. paper capacity
Max. stapling capacity
Staple position
MX-EB13
USB Wireless LAN Adapter
MX-FR45U
Data Security Kit
MX-AMX2
Application Communication Module
Non offset
Offset/staple
Saddle stitch
Upper tray
Lower tray
Saddle stitch tray
Model name For the MX-FN17 MX-PN11A MX-PN11B MX-PN11C
For the MX-FN10 MX-PNX5A MX-PNX5B MX-PNX5C
For the MX-FN11/FN18 MX-PNX6A MX-PNX6B MX-PNX6C
2
3
4
Number of holes
55 to 256 g/m2 *
Paper weight
* Guaranteed punchable weight is 55 to 128 g/m2.
MX-PN11D
MX-PNX5D
MX-PNX6D
4 (wide)
MX-DE12 Stand with 500-Sheet Paper Drawer
MX-FN10 Saddle Stitch Finisher
Paper size
External Account Module
Punch Modules
Non offset
Offset/staple
Max. paper capacity
Max. paper capacity
MX-AMX3
Certain options may not be available in some areas.
MX-FN17 Finisher
Paper size
Stand with 500
+ 2,000-Sheet
Paper Drawer
Application Integration Module
Specifications for Options
Paper size
MX-DE20
Stand with
3 x 500-Sheet
Paper Drawer
MX-UN1HA
Internet Fax Expansion Kit
MX-PUX1
Barcode Font Kit
MX-DE14
Sharp OSA Network Scanner Tool
10/50-License Kit
MX-USX1/X5
XPS Expansion Kit
Stand with
2 x 500-Sheet
Paper Drawer
MX-UN10A/50A
Stamp Unit
MX-PK11
PS3 Expansion Kit
MX-DE13
A3W (12" x 18") to A5 (5 1/2" x 8 1/2")*1
A3 (11" x 17") to B5*2 (8 1/2" x 11")
A3 (11" x 17"), B4 (8 1/2" x 14"), A4 (8 1/2" x 11")*3
1,550 sheets (A4, 8 1/2" x 11")
2,450 sheets (A4, 8 1/2" x 11")
10 sets of 11–15 sheets, 15 sets of 6–10 sheets,
25 sets of 1–5 sheets
50 sheets (A4 or smaller),
30 sheets (A4*4, B4 or larger)
3 locations (front, rear or both)
Paper size
Paper capacity
A3 (11" x 17") to A5 (5 1/2" x 8 1/2")*1
500 sheets
MX-DE13 Stand with 2 x 500-Sheet Paper Drawer
Paper size (upper and lower tray)
Paper capacity (upper and lower tray)
A3 (11" x 17") to A5 (5 1/2" x 8 1/2")*1
500 sheets each
MX-DE14 Stand with 3 x 500-Sheet Paper Drawer
Paper size (upper/middle/lower tray)
A3 (11" x 17") to A5 (5 1/2" x 8 1/2")*1
Paper capacity (upper/middle/lower tray) 500 sheets each
MX-DE20 Stand with 500 + 2,000-Sheet Paper Drawer
Paper size (upper tray)
(lower right/left tray)
Paper capacity (upper tray)
(lower right tray)
(lower left tray)
A3 (11" x 17") to A5 (5 1/2" x 8 1/2")*1
A4 (8 1/2" x 11")
500 sheets
850 sheets
1,150 sheets
MX-LT10 Long Paper Feeding Tray
Paper size
Paper capacity
Max. 1,200 mm long
1 sheet
MX-LC11 Large Capacity Tray
Paper size
Paper capacity
A4 (8 1/2" x 11")
3,500 sheets
*1: Only short-edge feeding can be used with A5 (5 1/2" x 8 1/2") paper.
*2: Only long-edge feeding can be used with B5 paper.
*3: Only short-edge feeding can be used with A4 (8 1/2" x 11") paper.
*4: Short-edge feeding.
Note: All specifications relating to paper capacity refer to 80 g/m2 paper.
Note: When using Sharpdesk, Sharp OSA Network Scanner Tool, and Sharp OSA, please ask your Sharp representative about PC system requirements.
10
Digital Multifunctional System
SPECIFICATIONS
(tentative)
Document Filing
General
Type
Engine speed
Paper size
Paper capacity
(80 g/m2)
Paper weight*4
Warm-up time*5
Memory
Power requirements
Power consumption
(max.)
Dimensions (W x D x H)
Weight (approx.)
Desktop
Max. 56*1/46/36 cpm/ppm (A4, 8 1/2" x 11", long-edge feeding)
Max. A3 wide (12" x 18")*2, min. A5 (5 1/2" x 8 1/2")*3
Standard: 600 sheets
(500-sheet tray and 100-sheet multi-bypass tray)
Maximum: 6,600 sheets
Tray: 60 g/m2 to 220 g/m2 (16 lbs bond to 80 lbs cover)
Multi-bypass tray: 55 g/m2 to 300 g/m2
(13 lbs bond to 110 lbs cover)
12 sec.
Standard: 3GB (copy/print shared)
320GB HDD*6
Option: 2GB
Rated local AC voltage ±10%, 50/60 Hz
1.84 kW (220 to 240V), 1.44 kW (100 to 127V)
608 x 690 x 837 mm (23 15/16" x 27 11/64" x 32 61/64")
MX-M564N/M464N: 66 kg (145.5 lbs)
MX-M364N: 65 kg (143.3 lbs)
Gradation
Zoom range
Preset copy ratios
Resolution
File formats
Scanner utility
Scan destinations
600 x 600 dpi, 9,600 (equivalent) x 600 dpi
USB 2.0, 10Base-T/100Base-TX/1000Base-T
Windows Server® 2003, Windows Server® 2008, Windows Server®
2012, Windows® XP, Windows Vista®, Windows® 7, Windows® 8,
Mac OS X 10.4, 10.5, 10.6, 10.7, 10.8, 10.9
TCP/IP (IPv4, IPv6), IPX/SPX (NetWare), EtherTalk (AppleTalk)
LPR, Raw TCP (port 9100), POP3 (e-mail printing), HTTP,
Novell Printserver application with NDS and Bindery,
FTP for downloading print files, EtherTalk printing, IPP
Standard: PCL 6 emulation
Option*13: PostScript® 3™ emulation, XPS
80 fonts for PCL, 136 fonts for PostScript 3 emulation
Facsimile (optional MX-FX11 required)
Compression method
Communication
protocol
Transmission time
Modem speed
Transmission resolution
Recording width
Memory
Greyscale levels
Network Colour Scanner
Scan method
Network protocols*12
Printing protocols
Available fonts
Max. A3 (11" x 17")
3.7/3.9/4.5 sec.
Max. 999 copies
Scan: 600 x 600 dpi, 600 x 400 dpi, 600 x 300 dpi*8
Print: 600 x 600 dpi, 9,600 (equivalent) x 600 dpi
Scan: 256 levels
Print: 2 levels
25% to 400% (25% to 200% using RSPF) in 1% increments
Metric: 10 ratios (5R/5E), inch: 8 ratios (4R/4E)
Main and custom folders: 20,000 pages or 3,000 files
Quick file folder: 10,000 pages or 1,000 files
Copy, print, scan, fax transmission
Quick file folder, main folder, custom folder (max. 1,000 folders)
Password protection
Network Printer
Resolution
Interface
Supported OS*12
PDL (emulation)
Copier
Original paper size
First copy time*7
Continuous copy
Resolution
Document filing
capacity*10
Stored jobs*11
Storage folders
Confidential storage
Push scan (via control panel),
pull scan (TWAIN-compliant application)
Push scan: 100, 200, 300, 400, 600 dpi
Pull scan: 75, 100, 150, 200, 300, 400, 600 dpi
50 to 9,600 dpi via user setting
TIFF, PDF, PDF/A, encrypted PDF, JPEG*9, XPS
Sharpdesk
Scan to e-mail/desktop/FTP server/network folder (SMB)/
USB memory
MH/MR/MMR/JBIG
Super G3/G3
Less than 3 seconds*14
33,600 bps to 2,400 bps with automatic fallback
From Standard (203.2 x 97.8 dpi) to Ultra Fine (406.4 x 391 dpi)
A3 to A5 (11" x 17" to 5 1/2" x 8 1/2")
1GB
Equivalent to 256 levels
• Design and specifications are subject to change without prior notice.
• Mycrostoner-CAP is a trademark of Sharp Corporation. Windows, Windows Server, Windows Vista, Excel, and
PowerPoint are registered trademarks of Microsoft Corporation in the US and/or other countries. Mac, Mac OS,
EtherTalk, and AppleTalk are trademarks of Apple Inc., registered in the US and other countries. PCL is a registered
trademark of Hewlett-Packard Company. PostScript and PostScript 3 are either registered trademarks or trademarks of
Adobe Systems Incorporated in the US and/or other countries. All other brand names and product names may be
trademarks or registered trademarks of their respective owners.
• The ENERGY STAR logo is a certification mark and may only be used to certify products that have been determined to
meet the ENERGY STAR programme requirements. ENERGY STAR is a US registered mark. The ENERGY STAR
guidelines apply to products only in the US, the EU, Japan, Canada, Australia, New Zealand, and Taiwan.
*1:
*2:
*3:
*4:
*5:
*6:
*7:
51 cpm/ppm for MX-M564N when equipped with MX-FN10.
A3 wide (12" x 18") paper must be fed through multi-bypass tray.
Only short-edge feeding can be used with A5 (5 1/2" x 8 1/2") paper.
Depending on usage conditions and type of paper, printing may not be executed correctly.
At rated voltage, 23°C (73.4°F). May vary depending on operating conditions and environment.
HDD capacity depends on procurement and sourcing status.
Long-edge feeding of A4 (8 1/2" x 11") sheets from paper tray, using document glass, MFP in fully ready
condition. May vary depending on operating conditions and environment.
*8: Not available when using RSPF.
*9: Colour only.
*10: Storage capacity will vary depending on the type of document and the scan settings.
*11: Some features require option(s).
*12: Optional MX-PK11 required for Mac OS and EtherTalk.
*13: PostScript requires optional MX-PK11. XPS requires optional MX-PUX1 and 2GB memory.
*14: Based on Sharp’s standard chart with approx. 700 characters (A4 or 8 1/2" x 11" long-edge feeding) at
standard resolution in Super G3 mode, 33,600 bps, JBIG compression.
1,213 mm
690 mm
1,731 mm
608 mm
Shown with options.
Distributed by:
© SHARP CORPORATION (FEB. 2014)