TPSMC6.8-TPSMC43 1500 Watts Surface Mount Transient Voltage Suppressor Features · 1500W peak pulse power capability with a 10/1000ms waveform, repetition rate (duty cycle): 0.01% · Excellent clamping capability · Low incremental surge resistance · Very fast response time · For devices with V(BR) 10V I D are typically ° less than 1.0mA at Ta = 150C A SMC B C · Pb / RoHS Free D J Mechanical Data H · Case : SMC Molded plastic · Epoxy : UL94V-O rate flame retardant · Lead : Lead Formed for Surface Mount · Polarity : Color band denotes cathode end except Bipolar. · Mounting position : Any · Weight : 0.21 grams G E Dim Min Max A 5.59 6.22 B 6.60 7.11 C 2.75 3.18 D 0.15 0.31 8.13 E 7.75 G 0.10 0.20 H 0.76 1.52 J 2.00 2.62 All Dimensions in mm Maximum Ratings @ TA = 25°C unless otherwise specified Parameter Peak Pulse Power Dissipation with a 10/1000 µs waveform (1)(2) Fig.5 Peak power pulse current with a 10/1000?s waveform (1) Fig.2 Peak Forward Surge Current, 8.3ms Single Half Sine-Wave (2)(3) Maximum instantaneous forward voltage at 100A(3) Operating and Storage Temperature Range Symbol Value Unit PPPM Minimum 1500 W IPPM See Next Table A IFSM 200 A VF 3.5 V TJ, TSTG - 65 to + 185 °C Notes : (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1 (2) Mounted on 0.31 x 0.31” (8.0 x 8.0mm) copper pads to each terminal (3) Measured on 8.3ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum 1of3 Type V BR (V) Min. Max. TPSMC6.8CA TPSMC6.8A TPSMC7.5CA TPSMC7.5A TPSMC8.2CA TPSMC8.2A TPSMC9.1CA TPSMC9.1A TPSMC10CA TPSMC10A TPSMC11CA TPSMC11A TPSMC12CA TPSMC12A TPSMC13CA TPSMC13A TPSMC15CA TPSMC15A TPSMC16CA TPSMC16A TPSMC18CA TPSMC18A TPSMC20CA TPSMC20A TPSMC22CA TPSMC22A TPSMC24CA TPSMC24A TPSMC27CA TPSMC27A TPSMC30CA TPSMC30A TPSMC33CA TPSMC33A TPSMC36CA TPSMC36A TPSMC39CA TPSMC39A TPSMC43CA TPSMC43A It (mA) V RWM (V) Maximum Reverse Leakage @ V RWM IR (µA) 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 1000 1000 500 500 200 200 50 50 20 20 5.0 5.0 2.0 2.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Breakdown Voltage @ It (Note 1) 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 Working Peak Reverse Voltage Notes : (1) VBR measured after It applied for 300 µs., It = square wave pulse or equivalent. (2) Surge current waveform per Fig. 5 and derate per Fig. 1 (3) "PSMC" will be omitted in marking on the diode. 2 of 3 Maximum Reverse Leakage @ V RWM, Tj=150 °C ID (µA) Maximum Peak Pulse Surge Current IPPM(2) (A) Maximum Clamping Voltage @ I PPM V RSM (V) 10000 10000 5000 2000 2000 500 500 200 200 50 50 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 139 143 128 132 120 124 109 112 100 103 92.6 96.2 86.7 89.8 78.9 82.4 68.2 70.8 63.8 66.7 56.6 59.5 51.5 54.2 47.0 49.0 43.2 45.2 38.4 40.0 34.5 36.2 31.4 32.8 28.8 30.1 26.6 27.8 24.2 25.3 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 120 200 PEAK FORWARD SURGE CURRENT, AMPERES PEAK PULSE POWER (PPP) OR CURRENT (IPP) DERATING IN PERCENTAGE (%) FIG.1 - PULSE DERATING CURVE 100 80 60 40 20 0 100 80 60 40 20 0 0 25 50 75 100 125 150 175 1 6 10 20 40 60 100 FIG.4 - PULSE RATING CURVE 10000 100 TJ = 25C f = 1MHz Vsig = 50mVp-p VR measured at zero bias 1000 100 VR measured at stand-off voltage, VWM 10 1 10 100 200 V(BR) , BREAKDOWN VOLTAGE (V) Tr = 10µs 100 Peak Value IPPM TJ=25 °C Pulse Width (tp) is defined as that point where the peak current decays to 50% of IRSM Half Value - IPPM 2 50 10X1000 Waveform as defined by R.E.A. tp 0 1.0 2.0 3.0 10 1.0 Ta = 25?C Non-repetitive pulse waveform shown in Fig. 5 0.1 0.1µs 1.0µs 10µs 100µs td, PULSE WIDTH FIG.5 - PULSE WAVEFORM 0 4 NUMBER OF CYCLES AT 60Hz Pp,PEAK POWER (kW) CJ - JUNCTION CAPACITANCE , pF 2 Ta, AMBIENT TEMPERATURE, ( °C) FIG.3 - TYPICAL JUNCTION CAPACITANCE IPPM, PEAK PULSE CURRENT - % TJ = TJ max 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 4.0 t, TIME(ms) 3 of 3 1.0ms 10ms