TH97/10561QM SMLVT3V3 TW00/17276EM IATF 0060636 SGS TH07/1033 TRANSIENT VOLTAGE SUPPRESSOR DIODE SMB (DO-214AA) FEATURES : * Uidirectional transient voltage suppressor * 600W peak pulse power capability with a 10/1000µs waveform * Low clamping factor * Fast response Time * Pb / RoHS Free 1.1 ± 0.3 4.8 ± 0.15 5.4 ± 0.15 Stand-off Voltage : 3.3 V Peak Pulse Power : 600 W 0.22 ± 0.07 2.0 ± 0.1 3.6 ± 0.15 2.3 ± 0.2 MECHANICAL DATA * Case : SMB Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Lead Formed for Surface Mount * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.108 gram Dimensions in millimeter MAXIMUM RATINGS Rating at 25 °C ambient temperature unless otherwise specified. Rating Peak Pulse Power Dissipation (1) , Tj initial = Ta Symbol Value Units PPP 600 W Power Dissipation on infinite heatsink, Ta = 50 °C PP 6 W Non-repetitive Surge Peak Forward Current, tp=10ms, Tj initial = Ta IFSM 50 A Thermal Resistances, Junction to Ambient RӨJA 100 °C/W Thermal Resistances, Junction to Leads RӨJL 20 °C/W TJ 175 °C TL 260 °C TSTG - 65 to + 175 °C Maximum Junction Temperature Maximum Lead Temperature soldering during 10s Storage Temperature Range ELECTRICAL CHARACTERISTICS (Rating at 25 °C ambient temperature unless otherwise specified) Type No. SMLVT3V3 Breakdown Voltage (2) @ IT Reverse Stand-off Voltage VBR (V) Min. IT (mA) VRWM (V) 4.1 1.0 3.3 Maximum Max.Clamping Peak Pulse Max.Clamping Peak Pulse Voltage Typ. Junction Reverse Voltage Surge Voltage Surge Temperature Capacitance @ IPPM @ IPPM VR = 0V, Leakage Current Current Coefficient @ VRWM (10/1000µs ) (10/1000µs ) (8/20µs ) (8/20µs ) f = 1MHz IRM VC IPPM VC IPPM αT @ 0 Volt (µA) (V) (A) (V) (A) pF (10-4/°C) 200 7.3 50 10.3 200 -5.3 5200 Notes: (1) For a surge greater than the maximum values, the diode will fail in short-circuit. (2) Pulse test : tp < 50ms. (3) "SMLV" will be omitted in marking on the diode. Page 1 of 2 Rev. 00 : March 12, 2008 TH97/10561QM TW00/17276EM IATF 0060636 SGS TH07/1033 RATING AND CHARACTERISTIC CURVES ( SMLVT3V3 ) FIG.2 - PEAK PULSE POWER RATING CURVE 100 100 PP,PEAK POWER (kW) PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT FIG.1 - PULSE DERATING CURVE 80 60 40 20 0 0 25 50 75 100 150 125 10 1.0 0.1 0.1μs 175 1.0μs 10μs 100μs 1.0ms 10ms td, PULSE WIDTH, SEC. Ta, TEMPERATURE (°C) IPPM, PEAK PULSE CURRENT, % FIG.3 - PULSE WAVEFORM tr ≤ 10μs 100 Peak Value IPPM Ta=25 °C Pulse Width (td) is defined as that point where the peak current decays to 50% of IPPM Half Value - I PPM 2 50 10/1000ms. Waveform as defined by R.E.A. 0 td 0 1.0 2.0 3.0 4.0 t, TIME(ms) Page 2 of 2 Rev. 00 : March 12, 2008