CX14SM AT CRYSTAL 12 MHz to 50 MHz Ultra-Miniature, Ultra-Low Profile Surface Mount AT Quartz Crystal ® Actual Size Top View DESCRIPTION Side View The CX14SM is an ultra-miniature, ultra-low profile, surfacemount AT quartz crystal that is ideal for applications where space is at a premium. PACKAGE DIMENSIONS FEATURES A Ultra-small footprint (3.2 mm x 2.5 mm typical) C D Ultra-low profile (0.59 mm typical) Designed for surface-mount applications 4 3 High shock and vibration resistance Custom designs available Full military testing available 3 B TOP 1 E 4 BOTTOM 2 2 1 Designed and manufactured in the USA PACKAGE DIMENSIONS APPLICATIONS Dimension Medical Medical telemetry Industrial, Computer, & Communications Minimum mm Typical mm Maximum mm A 3.10 3.20 3.45 B 2.40 2.50 2.75 C See below Instrumentation D 0.90 1.00 1.10 Handheld devices E 0.65 0.75 0.85 Animal tracking Military & Aerospace Communications THICKNESS (DIM C) Lid Surveillance devices Thin Glass Glass Projectile telemetry Ceramic Smart munitions Termination Minimum mm Typical mm Maximum mm SM1 0.49 0.59 0.70 SM2/SM4 0.51 0.61 0.72 SM3/SM5 0.52 0.63 0.77 SM1 0.52 0.63 0.72 SM2/SM4 0.54 0.65 0.74 SM3/SM5 0.55 0.67 0.79 SM1 0.42 0.52 0.60 SM2/SM4 0.44 0.54 0.62 SM3/SM5 0.45 0.56 0.67 IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com 90 01 TEM C ERT I F I C AT N IO S 10173 Rev A YS Pb SPECIFICATIONS TERMINATIONS Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Designation SM1 SM2 SM3 SM4 SM5 Fundamental Frequency 26 MHz 50 MHz Motional Resistance R1 (Ω) 20 25 Motional Capacitance C1 (fF) 3.5 3.0 Quality Factor Q (k) 80 40 Shunt Capacitance C0 (pF) 1.0 1.5 + _ Calibration Tolerance1 PIN CONNECTION 100 ppm, or tighter as required Load Capacitance2 10 pF Drive Level 100 µW MAX Termination Gold Plated (Lead Free) Solder Plated Solder Dipped Solder Plated (Lead Free) Solder Dipped (Lead Free) 4 SUGGESTED LAND PATTERN 1.3 3 1.05 Frequency-Temperature Stability1,3 + _ 50 ppm to + _ + _ 100 ppm to + _ 20 ppm (Industrial) + _ 100 ppm to + _ 30 ppm (Military) 10 ppm (Commercial) Aging, first year4 5 ppm MAX (better than 1 ppm available) Shock, survival5 5,000 g, 0.3 ms, 1/2 sine Vibration, survival6 20 g, 10-2,000 Hz swept sine Operating Temp. Range -10OC to +70OC (Commercial) -40OC to +85OC (Industrial) -55OC to +125OC (Military) O 1 2.9 2 Pads 2 and 4 are not connected. 3.6 EQUIVALENT CIRCUIT C0 L1 C1 R1 O Storage Temp. Range -55 C to +125 C Max Process Temperature 260OC for 20 sec. R1 Motional Resistance L1 Motional Inductance C1 Motional Capacitance C0 Shunt Capacitance 1. Other tolerances available. Contact factory. 2. Unless specified otherwise. 3. Does not include calibration tolerance. The characteristics of the frequency stability over temperature follow that of the AT thickness-shear mode. 4. 5 ppm MAX for frequencies below 40 MHz. For tighter tolerances and higher frequencies contact factory. 5. Higher shock version available. 6. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available. PACKAGING OPTIONS • Tray Pack • 12 mm tape, 7˝ or 13˝ reels Per EIA 481 (see Tape and Reel data sheet 10109) HOW TO ORDER CX14SM AT CRYSTALS CX14 S C SM1 – Blank = Standard Blank = Glass Lid SM1 = Gold Plated (Lead Free) S = Special or T = Thin Glass Lid SM2 = Solder Plated custom C = Ceramic Lid SM3 = Solder Dipped SM4 = Solder Plated (Lead Free) SM5 = Solder Dipped (Lead Free) 26.0M Frequency M = MHz , 100 / Calibration Tolerance @ 25OC (in ppm) 100 / — I / Operating Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified Frequency Stability over Temp. Range (in ppm) OR — / — / 200 Total Frequency Tolerance (in ppm) / I Operating Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified IS O STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com 90 01 TEM C ERT I F I C AT N IO S 10173 Rev A YS Pb