STATEK CX1SM_11

CX1SM AT CRYSTAL
6 MHz to 250 MHz
Miniature Surface Mount AT Quartz Crystal
Fundamental Mode:
6 MHz - 250 MHz
DESCRIPTION
STATEK’s miniature CX1SM AT crystals in leadless ceramic
packages are designed for surface mounting on printed
circuit boards or hybrid substrates. Due to its robust design,
this product has gained wide acceptance in the industry.
XX
SXX
glass lid
ceramic lid
FEATURES
PACKAGE DIMENSIONS
Designed for surface mount applications using
infrared, vapor phase, or epoxy mount techniques
Low profile hermetically sealed ceramic package
Excellent aging characteristics
Available with glass or ceramic lid
D
A
TOP
BOTTOM
E
D
High shock and vibration resistance
Custom designs available
Full military testing available
E
B
Designed and manufactured in the USA
C
APPLICATIONS
Medical
TYPICAL
MAXIMUM
DIM
inches
mm
inches
mm
A
0.315
8.00
0.330
8.38
B
0.140
3.56
0.155
3.94
C
-
-
Instrumentation
D
0.045
1.14
0.055
1.40
Process Control
E
0.060
1.52
0.070
1.78
Infusion Pumps
Monitoring Equipment
Industrial, Computer & Communications
see below
Environmental Control
Telemetry
Military & Aerospace
THICKNESS (DIM C) MAXIMUM
Communications
GLASS LID
Satellite Command and Control
Cockpit Electronics
Smart Munitions
Timing Devices (Fuzes)
CERAMIC LID
inches
mm
inches
mm
SM1
0.065
1.65
0.070
1.78
SM2/SM4
0.067
1.70
0.072
1.83
SM3/SM5
0.070
1.78
0.075
1.90
10107 - Rev D
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
SPECIFICATIONS
TERMINATIONS
Specifications are typical at 25OC unless otherwise noted.
Specifications are subject to change without notice.
Fundamental Frequency
10 MHz 32 MHz 155.52 MHz
Designation
SM1
SM2
SM3
SM4
SM5
Motional Resistance R1 (Ω)
30
25
15
Motional Capacitance C1 (fF)
5.5
6.2
4.0
Quality Factor Q (k)
100
30
30
Shunt Capacitance C0 (pF)
2.2
2.3
2.3
+
_
Calibration Tolerance1
Load Capacitance
Termination
Gold Plated (Lead Free)
Solder Plated
Solder Dipped
Solder Plated (Lead Free)
Solder Dipped (Lead Free)
Max Process Temperature
100 ppm, or tighter as required
SUGGESTED LAND PATTERN
20 pF for f ≤ 50 MHz
2
260OC for 20 sec.
0.070 (1.78)
10 pF for f > 50 MHz
Drive Level
500 µW MAX for f ≤ 50 MHz
0.160 (4.06)
200 µW MAX for f > 50 MHz
+
_
Frequency-Temperature
Stability1,3
+
_
+
_
Aging, first year4
50 ppm to
+
_
10 ppm (Commercial)
100 ppm to
100 ppm to
+
_
20 ppm (Industrial)
30 ppm (Military)
+
_
0.270 (6.86)
inches (mm)
5 ppm MAX (better than 1ppm available)
Shock, survival
3,000 g, 0.3 ms, 1/2 sine
5
Vibration, survival
20 g, 10-2,000 Hz swept sine
Operating Temp. Range
-10OC to +70OC (Commercial)
-40OC to +85OC (Industrial)
-55OC to +125OC (Military)
Storage Temp. Range
-55 C to +125 C
Max Process Temperature
260OC for 20 sec.
6
O
EQUIVALENT CIRCUIT
C0
1
L1
C1
R1
2
O
R1 Motional Resistance L1 Motional Inductance
C1 Motional Capacitance C0 Shunt Capacitance
1. Other tolerances available. Contact factory.
2. Unless specified otherwise.
PACKAGING OPTIONS
3. Does not include calibration tolerance. The characteristics of the frequency stability over
temperature follow that of the AT thickness-shear mode.
4. 5 ppm MAX for frequencies below 40 MHz. For tighter tolerances and higher frequencies
contact factory.
5. Higher shock version available. Refer to data sheet model CX1HGSM AT (10108).
6. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available.
• Tray Pack
• 16mm tape, 7” or 13” reels
Per EIA 481 (see Tape and Reel data sheet 10109)
HOW TO ORDER CX1SM AT CRYSTALS
CX1
S
“S” if special
or custom
design.
Blank if Std.
C
C = Ceramic Lid
Blank = Glass Lid
SM1
32.0M
Frequency
M = MHz
SM1 = Gold Plated (Lead Free)
SM2 = Solder Plated
SM3 = Solder Dipped
SM4 = Solder Plated (Lead Free)
SM5 = Solder Dipped (Lead Free)
,
100
Calibration
Tolerance
@ 25OC
(in ppm)
/
100
/
—
I
Operating Temp. Range:
C = -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S = Customer Specified
Frequency
Stability over
Temp. Range
(in ppm)
—
/
/
OR
—
/
200
Total
Frequency
Tolerance
(in ppm)
/
I
Operating Temp. Range:
C = -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S = Customer Specified
10107 - Rev D
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com