CENTER PIN / JACK SIZE MATING POWER PLUG L712AS 0.10 (2.5 mm) 761KS12, 761KS15, 761KS17 L722AS 0.08 (2.0 mm) S761KS12, S761KS15, S761KS17 767KS12, 767KS15, 767KS17 PART NUMBER PANEL MOUNT SEAL O-RING MATING PLUG SEAL O-RING FLAT WASHER HEX NUT 7/16-32 UN THREAD CENTER PIN 1.03 26.3 SLEEVE SHUNT SLEEVE SCHEMATIC 0.37 9.4 0.28 7.1 SLEEVE 0.53 13.4 0.65 16.5 0.62 15.7 SLEEVE SHUNT 0.440±0.002 11.18±0.05 CENTER PIN CENTER PIN/JACK SIZE (SEE TABLE) 7/16-32 UN - 2A THREAD MAXIMUM PANEL THICKNESS 0.090 2.29 RECOMMENDED PANEL MTG HOLE NOTES: CUSTOMER DRAWING 1. DIMENSIONS SHOWN FOR REFERENCE ONLY. THIS DRAWING DESCRIBES A DESIGN CONSIDERED PROPRIETARY IN NATURE, DEVELOPED AND MANUFACTURED BY SWITCHCRAFT INC. AND IS RELEASED ON A CONFIDENTIAL BASIS FOR IDENTIFICATION PURPOSES ONLY. 2. HEX NUT, FLAT WASHER, AND PANEL O-RING SUPPLIED UNASSEMBLED 3. MATERIAL: HOUSINGS, HEX NUT - COPPER ALLOY, NICKEL PLATED INSULATOR HOUSING - THERMOPLASTIC O-RINGS - NEOPRENE RUBBER, LUBRICATED WITH SYNTHETIC GREASE TERMINAL INSULATORS - PHENOLIC FLAT WASHER - STEEL, NICKEL PLATED PIN, SPRING, TERMINALS - COPPER ALLOY, SILVER PLATED 4. THIS PRODUCT IS RoHS COMPLIANT UNLESS OTHERWISE SPECIFIED 1. ALL DIMENSIONS IN INCHES SIZE WIDTH FINISH - TWO PLACE DECIMALS 0.02 - THREE PLACE DECIMALS 0.005 SPEC No. FIRST USED ON 27029 10/01/12 AB TJK DATE DRAWN A 26591 8/6/10 RS TJK 7/23/09 ECO NUMBER DATE REVISIONS BY APVD DO NOT SCALE DRAWING SolidWorks CAD File NAME B LBS/M TEMPER MATERIAL B REV MULT BY PNK SPEC No. SCALE 2:1 CHKD RS 8/6/10 APVD TJK 8/6/10 SEALED POWER JACKS SOLDER LUG, RoHS SHEET PART No. 1 OF 1 L712AS, L722AS REV B