G THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. C E C NOTES: 1. MATERIAL: BODY - ALUMINUM, TIN PLATED SCREW - ALUMINUM, TIN PLATED E 2. UL LISTED, CSA CERTIFIED, OR cULus FOR USE UP TO 600V & TEMPERATURE RATED 90 C (AL9CU) F F D 3. DUAL RATED FOR USE WITH COPPER OR ALUMINUM STRANDED CODE CONDUCTOR D 4. THESE PARTS ARE RoHS COMPLIANT B 5. USE OF OXIDE INHIBITING JOINT COMPOUND LIKE PANDUIT CMP-100 RECOMMENDED FOR PAD TO PAD AND CONDUCTOR SURFACES B A G RAD 6. SEE PACKAGING LABEL FOR TIGHTENING TORQUE INFORMATION A G RAD BOLT SIZE 7. PKG QTY: 6=6 BOLT SIZE W FIGURE 1 OR L FIGURE 2 L C DIM ENSIONS - IN [mm] P A RT NUM B ER US A FIG. WIRE RA NGE COP P ER/A LUM INUM WIRE STRIP LENGTH IN[mm] STUD SIZE IN A B C D E F G W HEX KEY* A GENCY E LA M 2A 1/0-14-6Y 1 14 A WG - 1/0 A WG .62 [15.7] 1/4 0.43 [10.8] 1.47 [37.3] 0.62 [15.7] 0.19 [4.8] 1.13 [28.6] 0.78 [19.9] 0.42 [10.7] N/A SLOTTED cULus D LA M 2A 2/0-14-6Y 1 14 A WG - 2/0 A WG .62 [15.7] 1/4 0.43 [10.8] 1.47 [37.3] 0.62 [15.7] 0.19 [4.8] 1.20 [30.6] 0.78 [19.9] 0.42 [10.7] N/A 3/16 cULus C LA M 2A 250-38-6Y 2 6 A WG - 250 kcmil 1.00 [25.4] 3/8 0.51[13.0] 2.56 [65.1] 1.00 [25.4] 0.25 [6.4] 1.64 [41.7] 1.19 [30.2] 1.05 [26.7] 1.50 [38.0] 5/16 cULus B LA M 2A 350-12-6Y 2 6 A WG - 350 kcmil 1.13 [28.6] 1/2 0.88 [22.2] 2.87 [73.0] 1.13 [28.6] 0.25 [6.4] 1.91[48.6] 1.25 [31.8] 0.86 [21.8] 1.73 [44.0] 5/16 cULus K J LA M 2A 600-12-6Y 2 2 A WG - 600 kcmil 1.38 [34.9] 1/2 0.63 [16.0] 3.19 [81.0] 1.38 [34.9] 0.44 [11.2] 2.38 [60.5] 1.56 [39.6] 1.19 [30.2] 2.00 [50.8] 3/8 UL & CSA H I LA M 2A 1000-58-6Y 1 500 kcmil - 1000 kcmil 1.63 [41.4] 5/8 0.88 [22.2] 3.50 [88.9] 1.63 [41.4] 0.50 [12.7] 3.50 [88.9] 1.94 [49.3] 1.00 [25.4] N/A 3/8 UL & CSA M * HEX SIZE MAY DIFFER FROM CHART. DIFFERENCE IN SIZE WILL NOT AFFECT FIT, FORM, OR FUNCTION OF PART 10N006AT-NC/01B F CORP. TINLEY PARK, ILLINOIS LAM2A SERIES ALUMINUM MECHANICAL LUGS CUSTOMER DRAWING UNLESS OTHERWISE SPECIFIED DIMENSIONAL TOLERANCES ARE: (.X) (.XXX) ----(.XX) --ANGLES --DRAWN BY JHNU 06 10/10 REV DATE JHNU JHNU BY CHK M. ADDED AGENCY COLUMN TO TABLE L. REMOVED MARKINGS FROM PART VIEWS DESCRIPTION 10N006AT-NC FLD ECN -R FLD DATE SUP CHK'D 2/06 UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE GIVEN IN INCHES, THIRD ANGLE PROJECTION SCALE MAT'L: SEE NOTES NONE DRAWING NO / CAD FILE 10N006AT-NC F DWG B SIZE