PANDUIT PCSB250-2-6Y

THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
HEX KEY
SCREW
QTY.
CAP
(SCREW PORT)
QTY.
CAP
(WIRE PORT)
QTY.
A
L
N
PCSB250-2-6Y
5/16
2
2
4
2.03
1.781
2
PCSB250-3-6Y
5/16
3
3
6
2.97
2.718
3
PCSB250-4-6Y
5/16
4
4
8
3.91
3.656
4
PCSB250-5-4Y
5/16
5
5
10
4.84
4.593
5
PCSB250-6-4Y
5/16
6
6
12
5.78
5.531
6
PCSB250-8-3Y
5/16
8
8
16
7.66
7.406
8
PCSB250-10-2Y
5/16
10
10
20
9.53
9.281
10
5/16
12
12
24
11.41
11.156
12
5/16
14
14
28
13.28
13.031
14
PANDUIT FINISHED
GOODS P/N
CLAMPING SCREW
ACCESS PORT (TYP.)
"N" PLCS
PCSB250-12-2Y
CONDUCTOR RANGE
250 kcmil - # 10 STR
250 kcmil - # 10 STR
PCSB250-14-1Y
TIGHTENING
TORQUE
275 In/lb
NOTES:
1. UL486A-UL486B LISTED, DUAL RATED CU9AL FOR ALUMINUM
OR COPPER CONDUCTORS. MEETS OR EXCEEDS ANSI C119.4
LISTED
.42
CERTIFIED
2. SEE TABLE FOR WIRE RANGE.
.67
(TYP.)
3. STRIP LENGTH: .88 +.06/-0
4. FOR TIGHTENING TORQUE SEE TABLE
L
THREE PORT CONNECTOR BLOCK SHOWN
WITH PLASTIC CLOSURE PLUGS REMOVED.
SEE TABLE FOR DIMENSIONS OF PARTS
WITH ADDITIONAL PORTS
5. VOLTAGE RATING: 600 V. MAX. BUILDING WIRE,
1000 V. MAX. IN SIGNS & FIXTURES.
6. TEMPERATURE RATING: 90 C (CU9AL).
CONDUCTOR
PORT (TYP.)
7. CONNECTOR BLOCK BODY ARE MADE FROM ALUMINUM.
CONDUCTOR PORTS IN CONNECTOR BLOCK
ARE PREFILLED WITH AN OXIDE-INHIBITING COMPOUND.
8. CONNECTOR TO INCLUDE TIN PLATED ALUMINUM CLAMPING
SCREWS FOR EACH CONDUCTOR PORT.
"N" PLCS
9. INSULATION MATERIAL IS CLEAR PVC.
1.36
10. CLAMPING SCREW ACCESS PORTS AND ALL WIRE ENTRY PORTS ARE
PROVIDED WITH REMOVABLE PLASTIC CLOSURE PLUGS.
11. ALL DIMENSIONS SHOWN ARE NOMINAL.
12. ONLY ONE CONDUCTOR PER PORT ALLOWED.
.42
.67
(TYP.)
13. PACKAGE QTY: -12 = 12 PCS.
-6 = 6 PCS.
-4 = 4 PCS.
1.56
14. THIS PART IS RoHS COMPLIANT.
A
CORP.
TINLEY PARK, ILLINOIS
MULTI-TAP INSULATED CONNECTORS
PCSB250 SERIES
UNLESS OTHERWISE SPECIFIED
DIMENSIONAL TOLERANCES ARE:
(.XXX)
(.X)
(.XX)
ANGLES
04
2/11
03
11/09
REV
DATE
JHNU JHNU ADDED CSA SYMBOL
N41571BB-C41571
FLD
FLD
NOTE 3: .88 WAS .56
JHNU JHNU REVISED
ADDED HEX KEY SIZE TO TABLE
BY
CHK
DESCRIPTION
DRAWN BY
MS
DATE
ECN
-R
SUP
CHK'D
08/99
RLS
UNLESS OTHERWISE SPECIFIED,
ALL DIMENSIONS ARE GIVEN IN
INCHES, THIRD ANGLE PROJECTION
SCALE
MAT'L:
SEE
NOTE 1
ABOVE
1.5:1
DRAWING NO / CAD FILE
C41571_04
DWG
B
SIZE