THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. FINE TENSION ADJUSTMENT KNOB RETRACTABLE BAIL G D COARSE TENSION ADJUSTMENT KNOB E F TENSION SETTING LOCATOR J C TENSION SETTING LABEL A BLADE GUARD H RETRACTABLE BAIL SEE SHEET 2 FOR PNEUMATIC HOOK UP INFO B F:/RVUSERS/ENGDOCS/CUSTDWGS/WH25024A01_00 PTH CD.doc SEE SHEET 2 FOR SPECIFICATIONS CORP. TINLEY PARK, ILLINOIS PTH CUSTOMER DRAWING UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: (.x) ± --(.xxx) ± --(.xx) ± 01 5-24-06 BLR ABJ 00 12-02-05 BLR MBR REV DATE BY CHK’D REFERENCE CHANGES RELEASED DESCRIPTION 4173 --- LAH 4173 --- BKA ECN -R CUST --- DRAWN BY: ANGLES ± --- MATL: BLR DATE: 12-02-05 SUP CHK’D: MBR SHEET 1 OF 2 UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE GIVEN IN INCHES, THIRD ANGLE PROJECTION. SCALE NONE DRAWING NO. WH25024A01 DWG A SIZE NOTES UNLESS OTHERWISE SPECIFIED: PANDUIT TOOL NUMBER PTH INSTALLS: STANDARD, HEAVY-STANDARD, LIGHT-HEAVY & HEAVY CABLE TIE CROSS-SECTIONS. THIS PNEUMATIC TOOL TIGHTENS CABLE TIES AND CUTS OFF EXCESS PORTION WHEN PRESET IS ATTAINED. REFERENCE: CABLE TIE CROSS-SECTION CODE: S = STANDARD, HS = HEAVY-STANDARD, LH = LIGHT-HEAVY AND H = HEAVY PHCAQ – ADAPTER FITTING FOR HOSE (PPH10) 1/4" MALE QUICK DISCONNECT (TO REGULATOR) PHCAT – ADAPTER FITTING FOR HOSE (PPH10) 1/4" NPT MALE CONNECTION (TO REGULATOR) KPTHBLD – BLADE REPLACEMENT KIT KPTSTL – TENSION LOCKING KIT WH25007C01 – BLADE GUARD HOUSING TOOL WEIGHT = 32 OZ. (907 GRAMS) PL289N1 – FILTER/REGULATOR (EU PART NO. MK-06) PNEUMATIC REQUIREMENTS = 70 – 100 PSIG FILTERED NON-LUBRICATED AIR AND PPH10 PNEUMATIC HOSE PPH10 – PNEUMATIC HOSE (EU PART NO. PPH10G) DIMENSIONS SHOWN IN (PARENTHESES) ARE METRIC: A = 2.28 B = 11.18 C = 6.81 D= .094 E = 1.15 F = 1.03 G= .90 H = 1.09 J = 1.84 ( 58 ) ( 284 ) ( 173 ) ( 2.4 ) ( 29 ) ( 26 ) ( 23 ) ( 28 ) ( 47 ) TRIGGER SPAN OVERALL LENGTH OVERALL HEIGHT BLADE GUARD SLOT WIDTH BLADE GUARD HEIGHT BLADE GUARD WIDTH SELECTOR KNOB HANDLE WIDTH BODY WIDTH PNEUMATIC HOOK UP: ATTACH 1/8” FEMALE QUICK DISCONNECT SOCKET END OF PPH10 AIR SUPPLY HOSE TO 1/8” MALE QUICK DISCONNECT FITTING AT END OF PTH TOOL. SEE SHEET 1 FOR PICTORAL CORP. TINLEY PARK, ILLINOIS PTH CUSTOMER DRAWING UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: (.x) ± --(.xxx) ± --(.xx) ± --- DRAWN BY: ANGLES ± --- MATL: ----- SEE SHEET 1 FOR DRAWING REVISION & RELATED INFORMATION REV DATE BY CHK’D DESCRIPTION ECN -R CUST SUP DATE: ----CHK’D: ----- SHEET 2 OF 2 UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE GIVEN IN INCHES, THIRD ANGLE PROJECTION. SCALE NONE DRAWING NO. DWG WH25024A01 SIZE A