THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. FINE TENSION ADJUSTMENT KNOB RETRACTABLE BAIL G D E COARSE TENSION ADJUSTMENT KNOB F TENSION SETTING LOCATOR C TENSION SETTING LABEL BLADE GUARD A H RETRACTABLE BAIL SEE SHEET 2 FOR PNEUMATIC HOOK UP INFORMATION B SEE SHEET 2 FOR SPECIFICATIONS FILE LOCATION: TEAMCENTER CORP. TINLEY PARK, ILLINOIS PTS CUSTOMER DRAWING UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: (.x) ± --(.xxx) ± --- 04 03 2-08-16 11-24-14 BLR BLR ABJ ABJ UPD LABEL ADDRESS UPD BRANDING, LABEL GRAPHIC 4908 4782 --- JADE (.xx) ± JADE 02 7-22-05 BLR ABJ REDRAWN W/CHANGES 4158 -- DLWE REV DATE BY CHK’D DESCRIPTION ECN -R CUST --- DRAWN BY: ANGLES ± --- MATL: BLR DATE: 3-04-04 SUP CHK’D: ABJ SHEET 1 OF 2 UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE GIVEN IN INCHES, THIRD ANGLE PROJECTION. SCALE NONE DRAWING NO. WB24652A01 DWG A SIZE REFERENCE: KGTSBLD – BLADE REPLACEMENT KIT KPTSTL - TENSION LOCKING KIT NOTES UNLESS OTHERWISE SPECIFIED: PANDUIT TOOL NUMBER PTS INSTALLS: SM, M, I, AND S CABLE TIE CROSS-SECTIONS. THIS PNEUMATIC TOOL TIGHTENS CABLE TIES AND CUTS OFF EXCESS PORTION WHEN PRESET IS ATTAINED. PPH10 – EXTERNAL PNEUMATIC HOSE: 1/8” NPT FEMALE QUICK DISCONNECT SOCKET, AND 1/8” NPT MALE QUICK DISCONNECT FITTING. CABLE TIE CROSS-SECTION CODE: SM = SUBMINIATURE, M = MINIATURE, I = INTERMEDIATE, S = STANDARD PHCA – EXTERNAL PNEUMATIC HOSE: 1/8” NPT FEMALE QUICK DISCONNECT SOCKET, AND ¼” NPT MALE QUICK DISCONNECT FITTING. TOOL WEIGHT = 17.3 OZ. (490 GRAMS) PL289N1 – FILTER/REGULATOR PNEUMATIC REQUIREMENTS = 70 – 90 PSIG FILTERED NON-LUBRICATED AIR AND EXTERNAL PNEUMATIC HOSE PNEUMATIC HOOK UP: ATTACH FEMALE QUICK DISCONNECT SOCKET END OF PNEUMATIC HOSE TO MALE QUICK DISCONNECT FITTING AT END OF PTS TOOL. DIMENSIONS SHOWN IN (PARENTHESES) ARE METRIC: A = 2.37 B = 9.42 C = 6.38 D = .060/.066 E = 0.74 F = 0.55 G = 0.90 H = 1.34 ( 60.19 ) ( 239.27 ) ( 162.05 ) ( 1.52/1.68 ) ( 18.79 ) ( 13.97 ) ( 22.86 ) ( 34.04 ) WB24468D01 – BLADE GUARD HOUSING TRIGGER SPAN OVERALL LENGTH OVERALL HEIGHT BLADE GUARD SLOT WIDTH BLADE GUARD HEIGHT BLADE GUARD WIDTH SELECTOR KNOB TOOL WIDTH MALE QUICK DISCONNECT FITTING - 1/8” NPT SEE SHEET 1 FOR PICTORAL CORP. TINLEY PARK, ILLINOIS PTS CUSTOMER DRAWING UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: (.x) ± --(.xxx) ± --(.xx) ± --- DRAWN BY: ANGLES ± --- MATL: ----- SEE SHEET 1 FOR DRAWING REVISION & RELATED INFORMATION REV DATE BY CHK’D DESCRIPTION ECN -R CUST SUP DATE: ----CHK’D: ----- SHEET 2 OF 2 UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE GIVEN IN INCHES, THIRD ANGLE PROJECTION. SCALE NONE DRAWING NO. WB24652A01 DWG A SIZE