XCG Digital Video Camera XCL COLOR VIDEO CAMERA MODULE XC-505/505P TV Format Output XCD Normal Shutter 1/3 Type NF CCD Lens Mount CCD Iris VBS Y/C Output Output HD VD VS VBS External Sync External Sync External Sync * ATW Fixed Manual One-Push RS232C White Balance White Balance White Balance White Balance Control * Burst signals are not locked and are free running. The XC-505/505P is an ultra-small color camera module that utilizes a 1/3-type Charge Coupled Device. The camera is so small and light that you can install it anywhere: even in locations where conventional video cameras cannot be installed. The function is made high performance, the camera ideally suited for a wide variety of applications such as machine vision, multimedia and remote monitoring. In addition, the XC-505/505P cameras use a unique, compact NF-mount lens system that can be converted into a flexible C-mount lens. 7.8 3.25 1 · · · · · · 8 F2 4 – F2.5 CBORE Depth 1 (8) 64 22 1.2 Rear Front 22 Unit: mm ■ Attached with tripod adaptor (supplied accessory) 29.4 37.9 WHT BAL 25.1 1 · · · · · · 8 25 The XCK-L555 allows you to bend the XC-505/505P 90 degrees horizontally (HL). 17.4 2 WHT BAL Features ■ 1/3-type IT CCD ■ Compact and light-weight: 22 (H) × 22 (W) × 64 (D) mm, 51 g ■ External synchronization: HD/VD, VS, VBS*1 ■ VBS and Y/C outputs ■ CCD IRIS function ■ Compact NF lens and lens mount ■ NR (2D/3D) ■ Edge enhancement ■ Internal Color bar ■ One piece camera - no bulky CCU ■ RS-232C interface to control camera functions*2 35.2 11.25 1.2 XCI XC (Non-TV Format) XC (TV Format) Dimensions ■ You can install XC-505/505P in only HL (horizontal) directions • XCK-L555 Angle Case Kit Accessories 19 5.4 12.6 FCB 38 ■ Compact camera adaptor • DC-700/700CE ■ 12-pin camera cable (CE standard) • CCXC-12P02N • CCXC-12P05N • CCXC-12P10N • CCXC-12P25N (2 m) (5 m) (10 m) (25 m) (2.5) Tripod part 1/4” -20 UNC 23.6 ■ Installation XCK-L555 Angle Case Kit 74.3 8 22 ■ NF-mount LENS EVI Color PTZ Camera Color Camera Module Outline *1 VBS signals input as external synchronized signals perform the same functions as VS signals. (Burst signals are not locked and are free running.) *2 For details on how to change this setting. Please refer to the Technical Manual. Accessories Analog Video Camera Intelligent Connection Diagram P117 • VCL-03S12XM • VCL-06S12XM • VCL-12S12XM 22 ■ C-mount adaptor • LO-999CMT * When a C-mount type lens is attached, a C-mount adaptor is required. ■ Right angle CCD mount • XCK-L555 28 85.3 Unit: mm 112 XC-505/505P Spectral Sensitivity Characteristics • XC-505P Relative sensitivity Relative sensitivity 1.0 1.0 0.8 0.8 0.6 0.6 XCG Cy Cy Ye XCD Mg Mg 0.4 0.4 Digital Video Camera XCL • XC-505 Ye 0.2 0.2 Gr Gr 0 500 550 600 650 700 400 450 500 Wavelength (nm) 550 600 650 700 Wavelength (nm) (Lens characteristics and light source characteristics excluded.) (Lens characteristics and light source characteristics excluded.) XC-505 Color PTZ Camera EVI Supplied accessories NF-mount (Flange back 12 mm) Internal / External (auto) HD/VD (HD/VD level: 2 Vp-p to 4 Vp-p), 75 Ω VS, VBS (1 Vp-p), 75 Ω VD/59.94 Hz ± 0.0009 Hz VD/50 Hz ± 0.00075 Hz HD/15734 Hz ± 0.016 Hz HD/15625 Hz ± 0.0156 Hz 525 lines 2:1 Interlaced 30 fps 625 lines 2:1 Interlaced 25 fps Complementary color mosaic VBS, Y/C (selected with the switch), VBS: 1 Vp-p, 75 Ω, sync negative, Y: 1 Vp-p, 75 Ω C: C level depends on the composite video out signal 15.734 kHz 15.625 kHz 59.94 Hz 50 Hz 470 TV lines 460 TV lines 485 TV lines 575 TV lines 2,000 lx F11 (γ=ON, AGC OFF (0 dB)) 1.5 lx (F1.4, AGC MAX. (18 dB)) 48 dB (AGC OFF (0 dB)) 46 dB (AGC OFF (0 dB)) ATW / 3,200 K / 5,600 K / ON-Push WB / MANUAL (R, B) AGC (0 dB to 18 dB) / FIX (0 dB) ON/OFF Controlled by RS-232C*1 OFF, Flickerless, (1/100), 1/1,000 sec, CCD IRIS Auto: 1/60 sec to 1/4,000 sec *RS-232C: 1/60 sec to 100,000 sec Auto: 1/50 sec to 1/4,000 sec *RS-232C: 1/50 sec to 100,000 sec DC IN, SYNC, VIDEO: multi 12-pin DC 10.5 V to 15 V 1.5 W 22 (W) × 22 (H) × 64 (D) mm (not including projecting parts) 51 g −5˚C to +45˚C −30˚C to +60˚C 0˚C to 40˚C 20% to 80% (no condensation) 20% to 95% (no condensation) 10 G (20 Hz to 200 Hz 20 minutes for each direction–x, y, z) 70 G 81,880 hours (Approx. 9.3 years) UL: UL6500, FCC/IC: FCC/IC Class A Digital Device, CE (EMC): EN61326 Class A, AS/NZ EMC: EN61326 Class A, CB: IEC60065, KC: KN22/KN24: Class A Lens mount cap (1), Tripod adaptor (1 set), Operating Instructions (1) Color Camera Module FCB Regulatory compliance PAL 752 × 582 739 × 575 6.50 μm × 6.25 μm Accessories Scanning system Color filter Video output Horizontal frequency Vertical frequency Horizontal resolution Vertical resolution Sensitivity Minimum illumination S /N ratio White balance Gain Gamma Shutter speed CCD IRIS Output connector Power requirements Power consumption Dimension Mass Operating temperature Storage temperature Performance guarantee temperature Operating humidity Storage humidity Vibration resistance Shock resistance MTBF NTSC 768 × 494 756 × 485 6.35 μm × 7.40 μm XC (TV Format) External sync frequency XC-505P 1/3-type IT CCD Analog Video Camera XC (Non-TV Format) Specifications Image device Signal system Effective picture elements (H) × (V) Effective lines (H) × (V) Cell size (H) × (V) Lens mount Sync system External sync system input/output XCI 450 Intelligent 0 400 The values for mass and dimension are approximate. *1 The RS-232C switch is set to OFF at the factory. For details on how to change this setting please refer to the Technical Manual. XC-505/505P 113 Connector Pin Assignments Å XCD XCG Digital Video Camera XCL Location and Function of Parts and Controls Ç É XCI XC (Non-TV Format) One Push white balance functions when the white balance adjustment mode is set to One Push WB. The white balance is automatically adjusted when this switch is pressed, and the color balance is retained after adjustment. 3 Lens mount (NF-mount) Lens mount shoulder 5.5 mm or less XC (TV Format) Signal Pin No. 1 2 3 4 5 6 7 8 9 10 11 Sync signal types External Sync signal HD,VD VS/VBS Input Ground +12 V VBS/Y Output VBS/Y Output (signal) HD Input HD Input (signal) VD Input (signal) Ground (–/C) –/C Output (signal) Ground +12 V VBS/Y Output VBS/Y Output (signal) – – VS/VBS Input (signal) Ground (–/C) –/C Output (signal) RS-232C (TXD) * RS-232C (RXD) * VS/VBS Input (GND) RS-232C VD Input (GND) 12 For installing a C-mount lens on the XC-505 • If you install a C-mount lens on the XC-505 you will need the C-mount adaptor LO-999CMT (sold separately). Be sure that the lens does not project more than 4.1 mm from the lens mount. • This camera uses a 1/3-inch CCD. So the lens should be used with this size of CCD. If used with a lens intended for 1/2-inch CCD, the angle of view will be different. • When connecting a heavy lens, make sure that it is supported properly. • When connecting heavy lens, make sure that it is not subject to shocks or vibration. Rear Panel Ground +12 V VBS/Y Output VBS/Y Output (signal) – – – Ground (–/C) –/C Output (signal) Ground Changing the setting of the RS-232C switch falls under the heading of dismantling the camera, and is outside the scope of the warranty. To change the setting, request assistance from the dealer from whom you purchased your camera. Mode Setting By flipping the DIP switches located on the side of this camera, you can adjust the following functions. Note Each switch is assigned to a function. The switches that should be set to adjust a certain function (white balance, shutter speed), to switch the AGC (ON/OFF), or to switch the output signals (Y/C/VBS) are specified and indicated by shading in the illustrations of the corresponding descriptions of the function. The switches that are not shaded are not related to these functions. FCB 1 WHT BAL 1 DC IN/SYNC/VIDEO connector (multi 12-pin) 114 Internal Sync signal * RS-232C setting If you install a C-mount lens on the Camera, you will need the C-mount adaptor LO-999CMT. Note EVI Color PTZ Camera Color Camera Module Select the white balance, shutter speed; and to flip, AGC (auto gain control) ON/OFF and output signal (Y/C/VBS). For details, see “Mode Setting by Dip Switch”. 2 One-Push WB Switch Accessories Analog Video Camera Intelligent 1 Dip switches for setting functions This connector inputs DC 12 V power and outputs the video signal when the CCXC-12P02N/12P05N/12P10N/12P25N camera cable is connected. If the unit is connected to devices that originate a synchronized signal, the external synchronous signal (VS, HD/VD) can be used to move the color camera module. VBS signals input as external synchronized signals perform the same functions as VS signals. (Burst signals are not locked and are free running.) XC-505/505P 1 8 ■ To Adjust the white balance ■ AGC (auto gain control) ON/OFF Select the white balance setting according to the lighting conditions. 5600K (fixed) For outdoor shooting on sunny days. ATW (auto tracing white balance) 0 dB 1 · · · · · · 8 The white balance is automatically adjusted when the One Push WB switch is pressed, and the color balance is retained after adjustment. The white balance is adjusted according to the color temperature transition of the subject. This mode is suitable for shooting with variable lighting (factory setting). To switch the AGC on or off, use the shaded switches. 1 · · · · · · 8 ■ Y/C/VBS Select the camera output signal. 1 · · · · · · 8 DIP switch setting Y/C Select this position to output the Y/C separated signal from the DC IN/VIDEO connector. 1 · · · · · · 8 VBS Select this position to output the VBS signal from the DC IN/VIDEO (factory setting). 1 · · · · · · 8 1 · · · · · · 8 Red hues are enhanced with each press of the One Push WB switch. 1 · · · · · · 8 Blue hues are enhanced with each press of the one Push WB switch. 1 · · · · · · 8 ■ Factory settings To change the One Push switch, use the shaded switches. ■ Shutter speed 1/1,000 1/1,000 sec CCD IRIS Set the CCD IRIS mode. FLICKERLESS 1/100 sec (XC-505) 1/120 sec (XC-505P) 3200K Shutter speed OFF OFF AGC ON ON Output signal (Y/C/VBS) VBS VBS *XC-555/555P: discontinued models DIP switch setting 1 · · · · · · 8 1 · · · · · · 8 Accessories Factory setting 1/60 sec (XC-505) 1/50 sec (XC-505P) XC-555/555P ATW XC (TV Format) Set the shutter speed switches to select the desired shutter speed. Using the CCD IRIS function, set the CCD IRIS mode. XC-505/505P White balance Analog Video Camera 1 · · · · · · 8 XC (Non-TV Format) To switch the output signals (Y/C/VBS), use the shaded switches. Blue hues are subdued with each press of the One Push WB switch. OFF XCI Output signal Intelligent Red hues are subdued with each press of the One Push WB switch. Lighting condition 1 · · · · · · 8 1 · · · · · · 8 The manual white balance adjustment, DIP switch and a combination One Push WB MAN (manual) OFF 1 · · · · · · 8 XCD One Push WB (One Push white balance) Auto gain control (factory setting) XCG For indoor shooting under incandescent light. ON Digital Video Camera 3200K (fixed) DIP switch setting DIP switch setting XCL Lighting condition Gain 1 · · · · · · 8 1 · · · · · · 8 Color Camera Module FCB To adjust the shutter speed, use the shaded switches. Color PTZ Camera EVI XC-505/505P 115