SMD Aluminum Electrolytic Capacitors Uniohm Corporation SMD Aluminum Electrolytic Capacitors Features 85 standard, case diameter 4~ 10mm Reflow soldering is available Available for high density mounting For detail specifications, please refer to Engineering Bulletin No. E130 Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Performance Characteristics -40 ~ +85 4 ~ 50 VDC 0.1 to 1000 F 20% (120Hz, 20 ) Leakage Current (+20 , max) I 0.01CV or 3 ( A) After 2 minutes, whichever is greater measured with rated working voltage applied Dissipation Factor (tan ) (+20 ,at 120Hz) Low Temperature Characteristics (120Hz) Load Lifre Shelf Lifre Rated voltage(VDC) D.F.( ) 4~6.3 max 8~10 Impedane ratio max Rated voltage(VDC) Z-25 Z+20 Z-40 Z+20 6.3 0.26 0.35 10 0.22 0.26 16 0.18 0.20 25 0.16 0.16 35 0.13 0.14 50 0.12 0.12 4 7 15 6.3 4 8 10 3 8 16 2 4 25 2 4 35 2 3 50 2 3 Test conditions Duration time :2000 Hrs Ambient temperature :+85 Applied voltage :Rate DC working voltage After test requirements at +20 : Capacitance change :Within 25% of the initial value Dissipation factor :Not more than 200% of specified value Leakage current :Not more than the specified value Test conditions Duration time :1000 Hrs Ambient temperature :+85 Applied voltage :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency Frequency(Hz) 60(50) 0.8 0.1~47 F Multiplier 100~1000 F 0.8 4 0.4 0.45 120 1.0 1.0 500 1.20 1.10 1K 1.30 1.15 Multiplier for Ripple Current vs. Temperature Temperature Multiplier 10K 1.50 1.20 50 2.0 70 1.6 85 1.0 Diagram of Dimensions:(unit:mm) D 4 5 6.3 8 8 10 Cathode 1 L A B C 5.5 4.3 4.3 4.9 5.5 5.3 5.3 5.9 5.5 6.6 6.6 7.2 6.5 8.3 8.3 9.0 10.5 8.3 8.3 9.0 10.5 10.3 10.3 11.0 W 0.5~0.8 0.5~0.8 0.5~0.8 0.5~0.8 0.7~1.1 0.7~1.1 P 1.0 1.4 1.9 2.3 3.1 4.5 SMD Aluminum Electrolytic Capacitors Uniohm Corporation Case Size DxL(mm) Ripple Current ( mA, rms ) at 85 2 120Hz