® SEM ICON DU CTO R SOD-523 SURFACE MOUNT Very Small Outline Flat Lead Plastic Package Transient Voltage Suppressors ESD Protection Diodes Absolute Maximum Ratings Symbol TA = 25°C unless otherwise noted Parameter Value IEC61000-4-2(ESD) Vpp Air Contact Per Human Body Model Per Machine Model Power Dissipation (Note 1) ESD PD TSTG Storage Temperature Range TJ Operating Junction Temperature Max Lead Solder Temperature range (10 Second Duration) TL Units ±30 ±30 16 400 150 KV KV V mW -55 to +150 °C +150 °C 260 °C These ratings are limiting values above which the serviceability of the diode may be impaired. Note 1. FR-5 = 1.0 x 0.75 x 0.62 in. Specification Features: Stand-off Voltage: 3.3V, 5.0V & 7.0V DEVICE MARKING CODES: Low Leakage Response Time is Typically < 1ns Device Type ESD5Z3V3 ESD5Z5V0 ESD5Z7V0 IEC61000-4-2 Level 4 ESD Protection RoHS Compliant Green EMC Device Marking ZE ZF ZH Matte Tin(Sn) Lead Finish Band Indicates Cathode Electrical Characteristics (TA = 25°C unless otherwise noted, VF = 0.9V Max. @IF = 10mA for all types) Device Type VRWM IR @ VRWM VBR @ IT (Note 2) IT (mA) VC @ IPP+ = 5A IPP+ VC @ Max IPP+ (Volts) (A) Typ. C@ (Volts) PPK+ (W) VR = 0V, f = 1MHz Max Max Max Typ. (Volts) (μA) Max Max Min ESD5Z3V3 3.3 1 5.0 1.0 8.4 11.2 14.1 158 105 ESD5Z5V0 5.0 1 6.2 1.0 11.6 9.4 18.6 174 80 ESD5Z7V0 7.0 1 7.5 1.0 13.5 8.8 22.7 200 65 (Volts) (pF) + Surge current waveform per Figure 1. Note 2: VBR is measured with a pulse test current IT at an ambient temperature of 25°C. Number: DB-239 March 2014, Revision B Page 1 ESD5Z3V3 & ESD5Z5V0 & ESD5Z7V0 TAK CHEONG TAK CHEONG ® SEM ICON DU CTO R SURGE CURRENT WAVEFORM： Flat Lead SOD-523 Package Outline Note: Dimensions are exclusive of Burrs, Mold Flash & Tie Bar extrusions. Number: DB-239 March 2014, Revision B Page 2 TAK CHEONG ® DISC LA I MER NOTIC E NOTICE The information presented in this document is for reference only. Tak Cheong reserves the right to make changes without notice for the specification of the products displayed herein. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Tak Cheong Semiconductor Co., Ltd., or anyone on its behalf, assumes no responsibility or liability for any damagers resulting from such improper use of sale. This publication supersedes & replaces all information reviously supplied. For additional information, please visit our website http://www.takcheong.com, or consult your nearest Tak Cheong’s sales office for further assistance. Number: DB-100 April 14, 2008 / A