SKY16601-555LF - Skyworks Solutions, Inc.

DATA SHEET
SKY16601-555LF: Integrated Single-Stage PIN Diode Limiter
Module 0.50 to 6.0 GHz
Applications
RF_OUT
RF_IN
 Cellular infrastructure
 WLAN, WiMAX
 Receiver LNA protection
 Test instruments
Y0087
Figure 1. SKY16601-555LF Block Diagram
Description
Features
 Optimized for 0.50 to 6.0 GHz operation
 Low insertion loss
 Low distortion
 Integrated PIN limiter, RF choke inductor, and DC blocks
 MLP (2-pin, 2.5 x 2.5 mm) Pb-free package, (MSL1, 260 °C
per JEDEC J-STD-020)
Skyworks Green™ products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green™, document number
SQ04-0074.
The SKY16601-555LF is a fully integrated PIN diode lowthreshold limiter module in a surface-mount package. It is
designed for use as a passive receiver protector in wireless or
other RF systems for frequencies up to 6 GHz. It features lowinsertion loss and low distortion in a single MLP package.
The SKY16601-555LF module is comprised of a PIN limiter diode,
an RF choke inductor, and 2 DC blocking caps at the RF ports in a
2-lead MLP package. The small package design reduces printed
circuit board area.
The module can operate over the temperature range of –40 ˚C to
+85 ˚C.
A functional block diagram is shown in Figure 1. The pin
configuration and package are shown in Figure 2. Signal pin
assignments and functional pin descriptions are provided in
Table 1.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202971B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 13, 2014
1
DATA SHEET ● SKY16601-555LF: INTEGRATED SINGLE-STAGE PIN DIODE LIMITER MODULE
1
2
5
4
6
3
Y0088
Figure 2. SKY16601-555LF Pinout, 2-Pin MLP
(Top View)
Table 1. SKY16601-555LF Signal Descriptions
Pin
Name
Description
1
RF_IN
RF Input, AC coupled
2
RF_OUT
RF Output, AC coupled
3
GND
Must be connected to chassis ground
4
PAD
Exposed pad (must be isolated from ground)
5
PAD
Exposed pad (must be isolated from ground)
6
PAD
Exposed pad (must be isolated from ground)
Electrical and Mechanical Specifications
module are provided in Table 3, and RF electrical specifications
for the 2.6 GHz limiter module are provided in Table 4.
The absolute maximum ratings of the SKY16601-555LF are
provided in Table 2. Electrical specifications for the limiter
Table 2. SKY16601-555LF Absolute Maximum Ratings (Note 1)
Parameter
Symbol
Reverse voltage
Minimum
Maximum
Unit
VR
45
V
Forward current @ 25 °C
IF
1.5
A
RF input power (CW) at TCASE = 85 C
PIN
23
W
RF input power (1 s pulse, 10% duty cycle) at TCASE = 85 C
PIN
230
W
CW power dissipation at TCASE = 85 C
PDIS
1
W
Storage temperature
TSTG
–65
+150
°C
Operating temperature
TOP
–40
+85
°C
Electrostatic discharge:
Charged Device Model (CDM), Class 4
Human Body Model (HBM), Class1A
Machine Model (MM), Class A
ESD
1000
250
150
V
V
V
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
2
March 13, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202971B
DATA SHEET ● SKY16601-555LF: INTEGRATED SINGLE-STAGE PIN DIODE LIMITER MODULE
CAUTION: Although these devices are designed to be as robust as possible, Electrostatic Discharge (ESD) can damage them. These
devices must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human
body or equipment, which can discharge without detection. Industry-standard ESD precautions should be employed at all
times.
Table 3. SKY16601-555LF Electrical Specifications (TA = 25C, Unless Otherwise Noted)
Parameter
Symbol
Breakdown voltage
VB
Condition
IR = 10 μA
Min.
Typ.
Max.
20
45
Units
V
Reverse current
IR
VR = 16 V
1
μA
Capacitance
CT
f = 1 MHz, VR = 6 V
0.33
0.40
pF
Series resistance
RS
f = 500 MHz, IF = 10 mA
1.7
2.0

Series inductance
LS
Carrier lifetime
TL
I region width
W
IF = 10 mA
0.3
nH
10
ns
1.5
μm
Table 4. SKY16601-555LF RF Electrical Specifications (TOP = 25C, ZO = 50 , as Measured in the Skyworks Evaluation Board)
Typ.
Max.
Units
Insertion loss
Parameter
IL
Symbol
PIN= 0 dBm
Condition
2.5 GHz
0.1
0.5
dB
Return loss
RL
PIN= 0 dBm
2.5 GHz
27.5
Threshold level
TL
P1dB
2.5 GHz
Saturated CW input power
PIN CW
Input third order intercept
IIP3
Recovery time (Note 1)
TR
5
ns
Thermal resistance
JC
Junction-to-case
88
C/W
Flat leakage power (Note 2)
FL
PIN = +20 dBm
13
dBm
Pin = 0 dBm/tone, spacing = 10 MHz
Frequency
Min.
10
11
dB
12
dBm
2.5 GHz
29
dBm
2.5 GHz
32
dBm
2.5 GHz
Note 1: Recovery time represents the transition time from the high-loss to low-loss state following the removal of high-power input. RF pulse modulation: 1 μs pulse width and 0.1% duty factor.
Note 2: Flat leakage power is defined as the power level after the limiter has fully turned on and the output pulse reaches a constant level.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202971B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 13, 2014
3
DATA SHEET ● SKY16601-555LF: INTEGRATED SINGLE-STAGE PIN DIODE LIMITER MODULE
Theory of Operation
A limiter prevents overload by allowing RF signals that are
below a certain threshold to pass through, but larger signals
exceeding the threshold are increasingly attenuated. The
SKY16601-555LF is a single-stage limiter module, comprised of
a shunt-connected PIN diode that biases itself in the presence
of large signals. The PIN diode performs the dual functions of
rectifying the incoming RF signal and then using the rectified
current to bias itself to a low effective series resistance. An
inductor completes the loop for the bias current flow while
presenting a high impedance path to RF. The SKY16601-555LF
includes input/output DC blocking capacitors needed for most
applications.
Typical Performance Characteristics
(TOP=25°C, Characteristic Impedance = 50 Ω)
Typical performance characteristics are illustrated in Figures 3
and 4. Figures 5 and 6 show the power derating curves for the
limiter module. In Figure 5, the temperature is referenced to the
bottom of the MLP package. The power derating curve with the
temperature referenced to the bottom of the printed circuit
board is shown in Figure 6.
5
0
–5
Insertion Loss (dB)
–10
–15
–20
–25
–5
–10
–15
500 MHz
900 MHz
2000 MHz
–20
–30
2500 MHz
S21
S11
–35
3500 MHz
–25
–40
0
2
4
6
8
Y0661
|S–Parameter| (dB)
0
0
5
10
10
Frequency (GHz)
20
25
30
40
45
40
Maximum CW Input Power (Watts)
40
35
30
25
20
15
10
5
35
30
25
20
15
10
5
0
0
25
45
65
85
105
125
145
165
Bottom of Package Leadframe Temperature (°°C)
Figure 5. Power De-rating Curve (Insertion Loss = 0.2 dB) vs
Temperature on Bottom of Package Leadframe
25
45
65
85
105
125
145
165
Bottom of Circuit Board Temperature (°°C)
Figure 6. Power De-rating Curve (Insertion Loss =0.2 dB)
vs Temperature on Bottom of EVB Circuit Board
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
4
35
Figure 4. Insertion Loss vs CW Input Power vs Frequency
Figure 3. Small Signal Performance
Maximum CW Input Power (Watts)
15
CW Input Power (dBm)
March 13, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202971B
DATA SHEET ● SKY16601-555LF: INTEGRATED SINGLE-STAGE PIN DIODE LIMITER MODULE
Evaluation Board Description
Package and Handling Information
The SKY16601-555LF evaluation board is used to test the
performance of the limiter module. An assembly drawing for the
evaluation board is shown in Figure 7. The evaluation board
layer detail is provided in Figure 8.
Instructions on the shipping container label regarding exposure
to moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
Package Dimensions
The SKY16601-555LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 °C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application
Note, Solder Reflow Information, document number 200164.
The PCB layout footprint for the SKY16601-555LF is shown in
Figure 9. Typical case markings are noted in Figure 10.
Package dimensions for the 2 pin MLP are shown in Figure 11,
and tape and reel dimensions are provided in Figure 12.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Y0091
Figure 7. SKY16601-555LF Evaluation Board Assembly Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202971B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 13, 2014
5
DATA SHEET ● SKY16601-555LF: INTEGRATED SINGLE-STAGE PIN DIODE LIMITER MODULE
Cross Section
Name
Thickness (in)
Material
Top Soldermask
L1
(0.0028)
Cu foil
0.012 ± 0.0006
Rogers RO4003C Core
L2
(0.0014)
Cu foil
Laminate
(Note 1)
FR4 Prepreg
L3
(0.0014)
Cu foil
0.010 ± 0.0006
FR4 Core
(0.0028)
Cu foil
Laminate
Laminate
L4
Bottom Soldermask
Note 1: Adjust this thickness to meet total thickness goal of 0.062 ± 0.005 inches.
S2531
Figure 8. Board Layer Detail Physical Characteristics
2X 0.850
Pad Isolated
from Ground
2X 0.558
2X 1.400
2X R0.125
2X Exposed
Solder Area
4X 0.125
2
1
3
0.922
2X 0.221
0.749
4
2X 0.546
0.425
2X 0.971
Pad Connected
to Ground
Package Outline
for Reference
Y0092
Figure 9. SKY16601-555LF PCB Layout Footprint
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
6
March 13, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202971B
DATA SHEET ● SKY16601-555LF: INTEGRATED SINGLE-STAGE PIN DIODE LIMITER MODULE
Pin 1
Indicator
Skyworks Part Number
Lot Number
Y0090
2.5
0.02 +0.03
-0.02
Pin 1 Indicator
Seating
Plane
Figure 10. SKY16601-555LF Typical Case Markings
Pin 1 Indicator
(R0.2)
1.12 ± 0.05
2X 0.69
Detail A
Detail B 2
2X (0.173)
1
0.44 ± 0.05
2X 0.92
(0.41)
2X (0.30)
2.5
1.09 ± 0.05
Exposed Pads
(0.28)
(0.28)
1.94 ± 0.05
0.75 ±0.05
Top View
Bottom View
Side View
0.4 ± 0.05
0.37
0.15
0.25 ± 0.05
Detail A
Notes:
4X R.0.05
Scale: 80X
1 X This Rotation
1 x Rotated 180°
Detail B
Scale: 80X
2 X This Rotation
All measurements are in millimeters.
Dimensioning and tolerancing according to ASME Y14.5M-1994.
Coplanarity applies to the exposed heat sink ground pad as well as the terminals.
Dimension applies to metalized terminal. If the terminal has a radius on its end,
the dimension should not be measured in that area.
Plating requirement per source control drawing (SCD) 2504.
Y0093
Figure 11. SKY16601-555LF 2-PIN MLP Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202971B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 13, 2014
7
2.75 ± 0.05 (Bo)
+0
2.00 ± 0.05
.10
–0
4.00 ± 0.10
B
Pin 1 Indicator
3.50 ± 0.05
.50
5° Max
1.10 ± 0.05 (Ko)
4.00 ± 0.10
A
B
8.00 + 0.30
–0.10
∅1
0.25 ± 0.02
1.75 ± 0.10
DATA SHEET ● SKY16601-555LF: INTEGRATED SINGLE-STAGE PIN DIODE LIMITER MODULE
A
∅1.00
Section B
+0.25
5° Ma
x
Notes:
1. Carrier tape: black conductive polycarbonate or polystyrene.
2. Cover tape material: transparent conductive.
3. ESD-surface resistivity shall be ≤ 1 x 1010 Ω/square per EIA,
JEDEC TNR Specification.
4. 10-sprocket hole pitch cumulative tolerance: ±0.20 mm.
5. Ao and Bo measurement point to be 0.30 mm from bottom pocket.
6. All dimensions are in millimeters.
2.75 ± 0.05 (Ao)
Section A
Figure 12. SKY16601-555LF Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
8
March 13, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202971B
Y0796
DATA SHEET ● SKY16601-555LF: INTEGRATED SINGLE-STAGE PIN DIODE LIMITER MODULE
Ordering Information
Model Name
SKY16601-555LF: Low Threshold PIN Diode Limiter Module
Manufacturing Part Number
Evaluation Board Part Number
SKY16601-555LF
SKY16601-555LF-EVB
Copyright © 2013-2014 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of
Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are
incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202971B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 13, 2014
9