Tape and Reel Guidelines for Isolators and Circulators

APPLICATION NOTE
Tape and Reel Guidelines for Isolators and Circulators
Introduction
Mechanical Specifications
This application note defines the standards to which Skyworks
complies in relation to the tape and reel dimensions of isolators
and circulators.
Skyworks carrier tapes shall meet the International
Electrotechnical Commission standard IEC 60286-3.
Figure 1 shows the tape dimensions and direction of unreeling.
Figure 2 shows the orientation of the isolators and circulators in
the tape. Table 1 lists the tape dimensions for each of the
packages. Table 2 shows the packing quantities and leader/trailer
information for each of the packages. Figure 3 shows the
allowable range of movement for components in the tape pocket.
4 mm
1.5 mm
(P)
(F1)
(F2) (W)
D2
Direction of Unreeling
Y1721
Figure 1. Tape Dimensions
XXX
YYWW
XXX
YYWW
XXX
YYWW
Y1722
Figure 2. Orientation of the Products in the Tape
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
203460A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 10, 2015
1
APPLICATION NOTE • TAPE AND REEL GUIDELINES FOR ISOLATORS AND CIRCULATORS
Table 1. Tape Dimensions for Each of the Packages
Diameter
Package
W (mm)
F1 (mm)
F2 (mm)
P (mm)
10mm
ODX-00142
32
14.2
28.5
24
10mm
ODX-00080
32
14.2
28.5
24
10mm
ODX-00085
32
14.2
28.5
24
15mm
ODX-00001
32
14.2
28.4
24
15mm
ODX-00069
32
14.2
28.4
24
15mm
ODX-00055
44
20.2
40.4
24
20mm
ODX-00003
44
20.2
40.4
32
20mm
ODX-00128
44
20.2
40.5
32
20mm
ODX-00076
44
20.2
40.5
28
20mm
ODX-00096
44
20.2
40.5
28
25mm
ODX-00006
44
20.2
40.4
40
25mm
ODX-00007
44
20.2
40.4
40
25mm
ODX-00175
44
20.2
40.4
40
25mm
ODX-00158
56
52.5
26.2
40
25mm
ODX-00033
56
52.5
26.2
40
25mm
ODX-00017
56
52.5
26.2
40
Table 2. Packing Quantity and Leader/Trailer Information for Each of the Packages
Package
Quantity Per Reel
Leader Pockets
Trailer Pockets
Leader Length (mm)
Trailer Length (mm)
ODX-00142
200
15
21
360
504
ODX-00080
200
15
21
360
504
ODX-00085
200
15
21
360
504
ODX-00001
200
15
21
360
504
ODX-00069
200
15
21
360
504
ODX-00055
200
15
21
360
504
ODX-00003
100
11
16
352
512
ODX-00128
100
11
16
352
512
ODX-00076
100
13
18
364
504
ODX-00096
100
13
18
364
504
ODX-00006
100
9
13
360
520
ODX-00007
100
9
13
360
520
ODX-00175
100
9
13
360
520
ODX-00158
100
9
13
360
520
ODX-00033
100
9
13
360
520
ODX-00017
100
9
13
360
520
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
2
February 10, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203460A
APPLICATION NOTE • TAPE AND REEL GUIDELINES FOR ISOLATORS AND CIRCULATORS
Figure 3. Allowable Component Movements in the Tape Pocket
Material Specifications
Carrier Tape Adhesion
The Carrier Tape consists of ESD-safe material with surface
resistivity of 108 to 1011 Ohms/sq.
The adhesion strength of the carrier tape is between 50 and
100 grams.
The Carrier Reel consists of ESD-safe material with surface
resistivity of 108 to 1011 Ohms/sq.
The Cover Tape consists of ESD-safe material with surface
resistivity of 108 to 1011 Ohms/sq.
Copyright © 2015 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of
Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by
reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
203460A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 10, 2015
3