APPLICATION NOTE Tape and Reel Information – RF Modules Production quantities of Skyworks RF Modules are shipped in standard tape and reel format. The enclosed information provides the formats and dimensions for the currently popular sizes. APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES Revision History Revision Date Description A April 24, 2002 Add: 4 x 4mm and 8 x 10 mm Tape and Reel Drawings B May 10, 2002 Add: ESD information C July 12, 2002 Add: Table 2 D August 12, 2004 Revise: Section 1.0; Figures 3, 5, 9, 11, 13, 15 Add: Section 2.0; Figures 1, 2, 4, 6, 7, 8, 10, 12, 14, 16, 17 E October 6, 2004 Delete: Shipping Tray Information (Refer to Application Note: Shipping Tray Information – RF Modules, Document Number 200079A) Add: Figure 7 (9 x 10 mm Body Size) F April 18, 2005 Add: Figures 1, 3, 5, 6, 7, 8, 11, 12, 15, 18, 20 G June 20, 2006 Add: Figure 3 (3 x 5 mm Body Size); Figure 4 (3 x 6 mm Body Size); References Revise: Section 1.0; Figure 2 (pocket depth) H December 7, 2007 Revise: Figures 13, 22 Add: Figures 5, 8-11, 14, 15, 18, 20, 21, 23, 29 I June 9, 2008 Revise: Figures 2, 4, 5, 8, 10, 15, 16, 19, 20, 21, 22, 23, 29, 30, 35, 37; Add: Figures 13, 18, 20, 26, 28 References Skyworks Solutions, Inc. Specification: Tape & Reel Materials Used For Shipping & Handling Semiconductor Packages, Document Number GP01-D232 3M™ is a trademark of the 3M Company EPAK® is a registered trademark of ePAK International, Inc. Kostat® is registered trademark of Kostat, Inc. ESD Standards EIA 481, EIA541, JESD625A Copyright © 2002–2008, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NONINFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, “Breakthrough Simplicity,” DCR, Helios, HIP3, Innovation to Go, Intera, iPAC, LIPA, Polar Loop, and System Smart are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com ii June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE Table of Contents Revision History ..........................................................................................................................................................................................ii References .................................................................................................................................................................................................ii 1.0 Carrier Tapes ......................................................................................................................................................................................3 1.1 Carrier Tapes – Black Conductive Polycarbonate .........................................................................................................................3 1.2 Carrier Tapes – Black Conductive Polystyrene..............................................................................................................................3 2.0 Electrostatic Discharge (ESD) Sensitivity..............................................................................................................................................3 List of Tables Table 1. Classes of ESD Sensitive Parts .......................................................................................................................................................3 Table 2. Static Shielding Foil Moisture Vapor Barrier Bag .............................................................................................................................3 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 1 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES List of Figures Figure 1. Carrier Tape Body Size: 2.44 x 4.5 x 1.5 mm – SOT-89 .....................................................................................................................4 Figure 2. Carrier Tape Body Size: 3 x 3 x 1.4 / 1.4 mm – Overmold MCM / RFLGA ...........................................................................................5 Figure 3. Carrier Tape Body Size: 3 x 5 x 1.0 mm – Overmold MCM .................................................................................................................6 Figure 4. Carrier Tape Body Size: 3 x 6 x 1.2 mm – Overmold MCM .................................................................................................................7 Figure 5. Carrier Tape Body Size: 3 x 8 x 1.2 mm – Overmold MCM .................................................................................................................8 Figure 6. Carrier Tape Body Size: 3.5 x 3.5 x 1.4 mm – MCM...........................................................................................................................9 Figure 7. Carrier Tape Body Size: 3.9 x 4.9 x 1.4 mm – 8L SOIC / 16L SSOP...................................................................................................10 Figure 8. Carrier Tape Body Size: 4 x 4 x 1.4 mm – Overmold MCM / RFLGA...................................................................................................11 Figure 9. Carrier Tape Body Size: 4 x 4.5 x 1.4 mm – Overmold RFLGA...........................................................................................................12 Figure 10. Carrier Tape Body Size: 4 x 7 x 1.2 mm – Overmold MCM ................................................................................................................13 Figure 11. Carrier Tape Body Size: 4.4 x 6.5 x 1.0 mm – 16L TSSOP ................................................................................................................14 Figure 12. Carrier Tape Body Size: 4.4 x 6.5 x 1.0 mm – 20L TSSOP ................................................................................................................15 Figure 13. Carrier Tape Body Size: 4.4 x 9.7 x 0.9 mm – 28L TSSOP ................................................................................................................16 Figure 14. Carrier Tape Body Size: 5 x 5 x 1.0 mm – Overmold MLF .................................................................................................................17 Figure 15. Carrier Tape Body Size: 5 x 5 x 1.3 / 1.0 mm – Overmold MCM / RFLGA ..........................................................................................18 Figure 16. Carrier Tape Body Size: 5 x 6 x 1.4 mm – Overmold MCM ................................................................................................................19 Figure 17. Carrier Tape Body Size: 5 x 8 x 1.4 mm – Overmold MCM ................................................................................................................20 Figure 18. Carrier Tape Body Size: 5.42 x 9.04 x 1.2 mm – Overmold MCM ......................................................................................................21 Figure 19. Carrier Tape Body Size: 6 x 6 x 1.4 mm – Overmold MCM / RFLGA (1 of 2).......................................................................................22 Figure 20. Carrier Tape Body Size: 6 x 6 x 1.75 mm – Overmold MCM / RFLGA (2 of 2).....................................................................................23 Figure 21. Carrier Tape Body Size: 6 x 7 x 1.0 mm – Overmold MCM / RFLGA...................................................................................................24 Figure 22. Carrier Tape Body Size: 6 x 8 x 1.4 mm – Overmold MCM ................................................................................................................25 Figure 23. Carrier Tape Body Size: 6 x 11 x 1.4 mm – Overmold MCM ..............................................................................................................26 Figure 24. Carrier Tape Body Size: 6 x 12 x 1.4 mm – Overmold MCM ..............................................................................................................27 Figure 25. Carrier Tape Body Size: 7 x 7 x 1.3 / 1.0 mm – Overmold BCC++ / MCM / RFLGA............................................................................28 Figure 26. Carrier Tape Body Size: 7 x 7.5 x 1.4 mm – Overmold MCM .............................................................................................................29 Figure 27. Carrier Tape Body Size: 7 x 11 x 1.4 mm – Overmold MCM ..............................................................................................................30 Figure 28. Carrier Tape Body Size: 7.5 x 7.5 x 1.4 mm – Overmold MCM..........................................................................................................31 Figure 29. Carrier Tape Body Size: 8 x 8 x 1.4 / 1.3 / 1.0 mm – Overmold MCM / RFLGA ..................................................................................32 Figure 30. Carrier Tape Body Size: 8 x 10 x 1.4 mm – Overmold MCM ..............................................................................................................33 Figure 31. Carrier Tape Body Size: 8.3 x 8.3 x 2.1 mm – Ceramic MCM ............................................................................................................34 Figure 32. Carrier Tape Body Size: 9 x 9 x 1.3 / 1.0 mm – Overmold RFLGA......................................................................................................35 Figure 33. Carrier Tape Body Size: 9 x 10 x 1.4 mm – Overmold MCM ..............................................................................................................36 Figure 34. Carrier Tape Body Size: 9 x 12 x 1.4 mm – Overmold MCM ..............................................................................................................37 Figure 35. Carrier Tape Body Size: 9.1 x 11.6 x 1.4 mm – Overmold MCM........................................................................................................38 Figure 36. Carrier Tape Body Size: 10 x 10 x 1.0 mm – Overmold FPBGA..........................................................................................................39 Figure 37. Carrier Tape Body Size: 10 x 14 x 1.4 mm – Overmold MCM ............................................................................................................40 Figure 38. Carrier Tape Body Size: 13 x 13 x 1.8 / 1.4 mm – Overmold MCM....................................................................................................41 Figure 39. Typical Tape and Reel Showing Unreeling Direction............................................................................................................................42 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE 1.0 Carrier Tapes Production quantities of Skyworks RF products can be delivered in standard tape-and-reel format for attachment in a production solderreflow environment. Carrier tapes identified in this Application Note may be manufactured of either polycarbonate or polystyrene material. The material used for each individual carrier tape is identified under NOTES on each tape and reel drawing. Skyworks tape and reel material complies with ESD standards EIA481, EIA541, and JESD625-A. The diagrams within this Application Note provide information regarding tape materials, dimensions, adherence to industry standards, and part numbers for placing orders. Carrier tape diagrams are arranged by part size (in millimeters) from the smallest to the largest and each part size is stated by its smallest dimension first. For example, the sequence of part sizes in Figures 1 through Figure 33 begins with the size 2.44 x 4.5 mm, followed by 3 x 3 mm, 3 x 5 mm, and so on through 13 x 13 mm in Figure 34. Any tape carrier diagram within this document may be quickly located from the List of Figures on page 1. Figure 22 illustrates the orientation of the carrier tape to the supply reel and the direction of the tape as it feeds from the reel. 1.1 Carrier Tapes – Black Conductive Polycarbonate Black conductive polycarbonate carrier tapes possess electrical and tribo-electrical properties that help protect static-sensitive components with an effective balance of the carrier’s electrostatic shielding and electrostatic decay properties. The electrically conductive polycarbonate carrier tape shows a nominal surface resistivity in the pocket of ≥104 Ω/square and ≤108 Ω/square, which minimizes dV/dt 50 to afford ESD protection to devices in Classes I through III. These properties of the black polycarbonate carrier are appropriate for packaging electro-statically sensitive components. 1.2 Carrier Tapes – Black Conductive Polystyrene Black conductive polystyrene carrier tapes possess electrical and tribo-electrical properties that help protect static-sensitive components with an effective balance of the carrier’s electrostatic shielding and electrostatic decay properties. The electrically static dissipative polystyrene carrier shows a nominal surface resistivity of 1010 Ω/square, which minimizes dV/dt to afford ESD protection to devices in Classes I through III. These properties of the black polystyrene carrier are appropriate for packaging electro-statically sensitive components. 2.0 Electrostatic Discharge (ESD) Sensitivity Table 1. Classes of ESD Sensitive Parts ESD Model ESD Class Human Body Model Voltage Range I > 0 V–1,999 V II 2,000 V–3,999 V III 4,000 V–15,999 V Table 2. Static Shielding Foil Moisture Vapor Barrier Bag Electrical Properties Method Units Typical Value Surface Resistance EOS/ESD S11.11 ohms In Out 1.0E+11 1.0E+11 Static Decay FTMS 101C/METHOD 4046 Sec. + 0.01 – 0.01 Energy Test EOS/ESD S11.31 nano-Joules 10 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 3 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES 8 ±0.1 0.3 ±0.05 (T) 4 ±0.1 Ø1.5 ±0.1 2 ±0.05 PIN 1 1.75 ±0.1 B 7° MAX. A A 5.5 ±0.05 12 ±0.3 4.9 ±0.1 (Bo) B Ø1 MIN. 1.9 ±0.1 (Ko) SECTION B – B 4.6 ±0.1 (Ao) 8° MAX. SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYCARBONATE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 9.2 mm WIDTH. 8 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 6. ALL DIMENSIONS ARE IN MILLIMETERS. 7. PART NO.: SOT-89-D (PLEASE INDICATE ON PURCHASE ORDER). 8. NUMBER OF PARTS per 13 inch (DIAMETER) x 16 mm REEL: 3000. ADVANTEK CARRIER TAPE CARRIER TAPE SOT-89 2.44 x 4.5 x 1.5 mm BODY SIZE GP01-D232-129B 101568_001 Figure 1. Carrier Tape Body Size: 2.44 x 4.5 x 1.5 mm – SOT-89 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE 8 ±0.1 B 0.3 ±0.05 (T) 2 ±0.05 4 ±0.1 Ø1.5 ±0.1 1.75 ±0.1 PIN 1 A 5.5 ±0.05 A 12 +0.3 –0.1 3.4 (Bo) B 1.7 (Ko) Ø1.5 MIN. SECTION B – B 3.4 (AO) SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYCARBONATE OR POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 9.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. 10 SPROCKET HOLE PITCH CUMULATIVE TOLERANCE: ±0.2 mm 6. Ao & Bo MEASURED ON PLANE 0.3 mm ABOVE THE BOTTOM OF THE POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 7. PART NO.: KS-1208-208 REV. 00 (PLEASE INDICATE ON PURCHASE ORDER). 8. NUMBER OF PARTS per 13 inch (DIAMETER) x 12 mm REEL: 4500. KOSTAT CARRIER TAPE CARRIER TAPE OVERMOLD MCM / RFLGA 3 x 3 x 1.4 mm BODY SIZE GP01-D232-187A 101568_002 Figure 2. Carrier Tape Body Size: 3 x 3 x 1.4 / 1.4 mm – Overmold MCM / RFLGA Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 5 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES 8 (P1) 0.3 ±0.05 (T) PIN 1 4 (Po) 2 ±0.05 1.75 ±0.1 Ø1.55 ±0.05 B 5° MAX. A 5.5 ±0.05 A 12 ±0.3 5.35 (Bo) B 1.4 (Ko) Ø1.5 MIN. SECTION B – B 5° MAX. 3.35 (Ao) SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 9.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1, 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-MCM0305-12-8-F1-L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER). 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 12 mm REEL: 4500. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM 3 x 5 x 1.0 mm BODY SIZE GP01-D232-173A 101568_003 Figure 3. Carrier Tape Body Size: 3 x 5 x 1.0 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE 8 (P1) Ø1.55 ±0.05 0.3 ±0.05 (T) 4 (Po) 1.75 ±0.1 B PIN 1 5° MAX. 5.5 ±0.05 A A 12 ±0.3 6.35 (Bo) B 1.6 (Ko) Ø1.5 MIN. SECTION B – B 3.35 (Ao) 5° MAX. SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 9.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1, 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-MCM0306-12-8-F1-L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER). 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 12 mm REEL: 4500. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM 3 x 6 x 1.2 mm BODY SIZE GP01-D232-171A 101568_004 Figure 4. Carrier Tape Body Size: 3 x 6 x 1.2 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 7 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES 8 (P1) 2 ±0.05 4 (Po) B Ø1.55 ±0.05 0.3 ±0.05 1.75 ±0.1 PIN 1 A 7.5 ±0.05 A 16 ±0.3 8.35 (Bo) 1.4 ±0.1 (Ko) B Ø1.5 MIN. SECTION B – B 3.35 (Ao) SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE SENSITIVE ADHESIVE (PSA) MATERIAL W/ 13.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-MCM3x8-16-8-F1-L REV. O (PLEASE INDICATE ON PURCHASE ORDER.) 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 12 mm REEL: 2500. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM 3 x 8 x 1.2 mm BODY SIZE GP01-D232-203A 101568_005 Figure 5. Carrier Tape Body Size: 3 x 8 x 1.2 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE Ø1.5 ±0.1 8 (P1) 0.3 ±0.05 (T) 4 (Po) 2 ±0.05 1.75 ±0.1 B PIN 1 A 5.5 ±0.05 A 12 +0.3 –0.1 3.8 (Bo) B 1.5 (Ko) SECTION B – B Ø1.5 MIN. 3.8 (Ao) SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYCARBONATE OR POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 9.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1, 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-MCM3.5x3.5-12-8-F1-L (PLEASE INDICATE ON PURCHASE ORDER). 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 12 mm REEL: 2500. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM 3.5 x 3.5 x 1.4 mm BODY SIZE GP01-D232-185A 101568_006 Figure 6. Carrier Tape Body Size: 3.5 x 3.5 x 1.4 mm – MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 9 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES 8 ±0.1 0.292 ±0.013 (T) 4 ±0.1 2 ±0.05 Ø1.55 ±0.05 B 1.75 ±0.1 PIN 1 5° MAX. A A 5.5 ±0.05 12 +0.3 –0.1 5.49 ±0.1 (Bo) B 1.68 ±0.1 (Ko) 1.5 +0.25 SECTION B – B 6.88 ±0.1(Ao) 8° MAX. SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYCARBONATE OR POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 9.3 mm WIDTH. 8 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. ALL DIMENSIONS ARE IN MILLIMETERS. 6. PART NO.: US019881 (PLEASE INDICATE ON PURCHASE ORDER). 7. NUMBER OF PARTS per 13 inch (DIAMETER) x 12 mm REEL: 2500. 3M CARRIER TAPE CARRIER TAPE 8L SOIC / 16L SSOP 3.9 x 4.9 x 1.4 mm BODY SIZE GP01-D232-001C 101568_007 Figure 7. Carrier Tape Body Size: 3.9 x 4.9 x 1.4 mm – 8L SOIC / 16L SSOP Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 10 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE 4 ±0.1 8 ±0.1 PIN 1 Ø1.5 ±0.1 2 ±0.05 1.75 ±0.1 B 0.3 ±0.05 (T) A A 5.5 ±0.05 12 +0.3 –0.1 4.4 (Bo) B 1.7 (Ko) Ø1.5 MIN. SECTION B – B 4.4 (Ao) SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYCARBONATE OR POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE SENSITIVE ADHESIVE (PSA) MATERIAL W/ 9.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. 10-SPROCKET HOLE PITCH CUMULATIVE TOLERANCE: ±0.2 mm 6. Ao & Bo MEASURED ON PLANE 0.3 mm ABOVE THE BOTTOM OF THE POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: KS-1208-40 REV. 03 (PLEASE INDICATE ON PURCHASE ORDER). 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 12 mm REEL: 4500. KOSTAT CARRIER TAPE CARRIER TAPE OVERMOLD MCM / RFLGA 4 x 4 x 1.4 mm BODY SIZE GP01-D232-189A 101568_008 Figure 8. Carrier Tape Body Size: 4 x 4 x 1.4 mm – Overmold MCM / RFLGA Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 11 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES 8 (P1) B 0.3 ±0.05 (T) 4 (Po) Ø1.55 ±0.05 1.75 ±0.1 PIN 1 5.5 ±0.1 A A 12 ±0.3 4.85 (Bo) 1.4 ±0.1 (Ko) SECTION B – B B Ø1.5 MIN. 4.35 ±0.1 (Ao) SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 9.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1, 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-LGA4x4.5-12-8-F1-L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER). 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 12 mm REEL: 2500. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD RFLGA 4 x 4.5 x 1.4 mm BODY SIZE GP01-D232-201A 101568_009 Figure 9. Carrier Tape Body Size: 4 x 4.5 x 1.4 mm – Overmold RFLGA Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 12 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE Ø1.55 ±0.05 B 0.3 ±0.05 (T) 5° MAX. 8 (P1) 2 ±0.05 1.75 ±0.1 4 (Po) PIN 1 A A 7.5 ±0.05 7.35 (Bo) 16 ±0.3 B 1.5 (Ko) Ø1.5 MIN. SECTION B – B 5° MAX. 4.35 (Ao) SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 13.3 mm WIDTH. 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 1010 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1, 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 FROM BOTTOM SPROCKET 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-MCM4X7-16-8-F1-L REV. 0. (PLEASE INDICATE ON PURCHASE ORDER). 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 12 mm REEL: 4500. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM 4 x 7 x 1.2 mm BODY SIZE GP01-D232-179A 101568_010 Figure 10. Carrier Tape Body Size: 4 x 7 x 1.2 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 13 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES 4 ±0.1 8 ±0.1 B 0.3 ±0.05 (T) 2 ±0.05 1.75 ±0.1 +0.1 Ø1.5 –0.0 PIN 1 A A 7.5 ±0.05 16 ±0.3 5.6 ±0.1 (Bo) 1.6 ±0.1 (Ko) B Ø1.5 MIN. R0.5 TYP SECTION B – B 6.95 ±0.1 (Ao) 1.2 ±0.1 3.4 1.37 SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYCARBONATE NON-BAKEABLE MATERIAL. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE HEAT-SENSITIVE ADHESIVE (HSA) MATERIAL W/ 13.3 mm WIDTH. 5 4. ESD-SURFACE RESISTIVITY SHALL BE ≥ 1 X 10 ~ ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. ALL DIMENSIONS ARE IN MILLIMETERS. 6. PART NO.: TSSP16-B (PLEASE INDICATE ON PURCHASE ORDER). 7. NUMBER OF PARTS per 13 inch (DIAMETER) x 16 mm REEL: 3000. ADVANTEK CARRIER TAPE CARRIER TAPE 16L TSSOP 4.4 x 6.5 x 1.0 mm BODY SIZE GP01-D232-121B 101568_011 Figure 11. Carrier Tape Body Size: 4.4 x 6.5 x 1.0 mm – 16L TSSOP Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 14 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE 4 ±0.1 8 ±0.1 PIN 1 2 ±0.05 Ø1.5 ±0.1 B 0.292 ±0.13 (T) 1.75 ±0.1 7° MAX. A A 5.5 ±0.05 +0.3 12 –0.1 7.05 ±0.1 (Bo) B 1.7 ±0.1 (Ko) Ø1.5 +0.25 SECTION B – B 6.75 ±0.1 (Ao) 8° MAX. 4 SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYCARBONATE OR POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 9.3 mm WIDTH. 8 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. ALL DIMENSIONS ARE IN MILLIMETERS. 6. PART NO.: US044571 (PLEASE INDICATE ON PURCHASE ORDER). 7. NUMBER OF PARTS per 13 inch (DIAMETER) x 12 mm REEL: 2500. 3M CARRIER TAPE CARRIER TAPE 20L TSSOP 4.4 x 6.5 x 1.0 mm BODY SIZE GP01-D232-003C 101568_012 Figure 12. Carrier Tape Body Size: 4.4 x 6.5 x 1.0 mm – 20L TSSOP Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 15 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES 4 ±0.1 8 ±0.1 0.318 ±0.013 (T) PIN 1 Ø1.5 ±0.1 2 ±0.05 1.75 ±0.1 B 7° MAX. A 7.5 ±0.05 A 16 +0.3 –0.1 9.95 ±0.1 (Bo) B Ø1.5 +0.25 1.6 ±0.1 (Ko) SECTION B – B 6.75 ±0.1 (Ao) 8° MAX. 3.96 SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYCARBONATE OR POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 13.3 mm WIDTH. 8 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. ALL DIMENSIONS ARE IN MILLIMETERS. 6. PART NO.: US045391 (PLEASE INDICATE ON PURCHASE ORDER). 7. NUMBER OF PARTS per 13 inch (DIAMETER) x 16 mm REEL: 2500. 3M CARRIER TAPE CARRIER TAPE 28L TSSOP 4.4 x 9.7 x 0.9 mm BODY SIZE GP01-D232-077C 101568_013 Figure 13. Carrier Tape Body Size: 4.4 x 9.7 x 0.9 mm – 28L TSSOP Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 16 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE 8 ±0.1 0.3 ±0.05 4 ±0.1 1.75 ±0.1 2 ±0.05 Ø1.5 +0.1 –0.0 B PIN 1 R0.3 MAX. A 5.5 ±0.05 A 12 ±0.3 5.25 (Bo) B 1.1 (Ko) R0.25 TYP SECTION B – B Ø1.5 MIN. 5.25 (Ao) R0.3 MAX. SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE, NON-BAKEABLE MATERIAL. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE HEAT-SENSITIVE ADHESIVE (HSA) MATERIAL W/ 9.2 mm WIDTH. 5 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≥ 1 X 10 ~ ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. ALL DIMENSIONS ARE IN MILLIMETERS. 6. PART NO.: ML0505-A (PLEASE INDICATE ON PURCHASE ORDER). 7. NUMBER OF PARTS per 13 inch (DIAMETER) x 12 mm REEL: 5000. ADVANTEK CARRIER TAPE CARRIER TAPE MLF 5 x 5 x 1.0 mm BODY SIZE GP01-D232-175A 101568_014 Figure 14. Carrier Tape Body Size: 5 x 5 x 1.0 mm – Overmold MLF Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 17 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES 8 (P1) Ø1.55 ±0.05 0.3 ±0.05 4 (Po) 2 ±0.05 B 1.75 ±0.1 PIN 1 5° MAX. A A 5.5 ±0.05 12 ±0.3 5.35 (Bo) 1.7 (Ko) B Ø1.5 MIN. SECTION B – B 5.35 (Ao) 5° MAX. SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 9.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1 10 PITCHES CUMULATIVE ON TAPE: ±0.2 mm. 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-LGA0505-12-8-F1-L REV. 0. (PLEASE INDICATE ON PURCHASE ORDER). 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 12 mm REEL: 4000. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD RFLGA / MCM 5 x 5 x 1.3 / 1.0 mm BODY SIZE GP01-D232-047D 101568_015 Figure 15. Carrier Tape Body Size: 5 x 5 x 1.3 / 1.0 mm – Overmold MCM / RFLGA Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 18 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE 8 (P1) Ø1.55 ±0.05 4 (Po) 2 ±0.05 B 0.3 ±0.05 (T) 1.75 ±0.1 PIN 1 5° MAX. A A 5.5 ±0.1 12 ±0.3 6.35 (Bo) 2 (Ko) B Ø1.5 MIN. SECTION B – B 5.35 (Ao) 5° MAX. SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 9.3 mm WIDTH. 10 4. ED-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-MCM5x6x1.5-12-8-F1-L Rev. 0 (PLEASE INDICATE ON PURCHASE ORDER). 9. NUMBER OF PARTS per 13 inch (DIAMETER) X 12 mm REEL: 4000. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM 5 x 6 x 1.4 mm BODY SIZE GP01-D232-139A 101568_016 Figure 16. Carrier Tape Body Size: 5 x 6 x 1.4 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 19 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES 8 (P1) Ø1.55 ±0.05 2 ±0.05 4 (Po) 1.75 ±0.1 B 0.3 ±0.05 PIN 1 A A 7.5 ±0.05 16 ±0.3 8.3 (Bo) B Ø1.5 MIN. 1.8 (Ko) SECTION B – B 5.3 (Ao) SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE SENSITIVE ADHESIVE (PSA) MATERIAL W/ 13.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-MCM5x8-16-8-F1-L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER.) 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 16 mm REEL: 2500. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM 5 x 8 x 1.4 mm BODY SIZE GP01-D232-133A 101568_017 Figure 17. Carrier Tape Body Size: 5 x 8 x 1.4 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 20 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE 4 (Po) 0.3 ±0.05 (T) PIN 1 2 ±0.05 Ø1.55 ±0.05 B 1.75 ±0.1 5° 7.5 ±0.05 A A 16 ±0.3 9.35 (Bo) 1.35 (Ko) B SECTION B–B 8 (P1) Ø1.5 MIN. 5.7 (Ao) SECTION A–A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE SENSITIVE ADHESIVE (PSA) MATERIAL W/ 13.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-MCM5.42x9.04-16-8-F1-L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER.) 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 16 mm REEL: 2500. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM 5.42 x 9.04 x 1.2 mm BODY SIZE GP01-D232-181A 101568_018 Figure 18. Carrier Tape Body Size: 5.42 x 9.04 x 1.2 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 21 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES 8 (P1) Ø1.50 ±0.1 0.3 ±0.02 7° MAX. PIN 1 (See Notes 1, 2) 4 (Po) 2 ±0.05 B 1.75 ±0.1 A A 5.5 ±0.05 12 ±0.3 6.35 (Bo) B 1.59 (Ko) SECTION B – B 6.35 (Ao) Ø1.5 MIN. 8° MAX. SECTION A – A NOTES: 1. PIN 1 ORIENTATION SHALL BE "TOP LEFT" ONLY FOR RFLGA & MCM PRODUCTS LISTED BELOW: SKY73022-21 SKY73022-31 SKY73023-21 SKY73023-31 2. PIN 1 ORIENTATION SHALL BE "TOP RIGHT" FOR ALL 6 x 6 mm RFLGA & MCM PRODUCTS EXCEPT THOSE LISTED IN NOTE 1 ABOVE. 3. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 4. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 5. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 9.3 mm WIDTH. 10 6. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 7. Po / P1 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 8. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 9. ALL DIMENSIONS ARE IN MILLIMETERS. 10. PART NO.: eC3-MCM0606-12-8-F1-L (PLEASE INDICATE ON PURCHASE ORDER). 11. NUMBER OF PARTS per 13 inch (DIAMETER) x 12 mm REEL: 3000. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM/RFLGA 6 x 6 x 1.4 mm BODY SIZE GP01-D232-049J 101568_019 Figure 19. Carrier Tape Body Size: 6 x 6 x 1.4 mm – Overmold MCM / RFLGA (1 of 2) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 22 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE 8 (P1) 0.3 ±0.05 5° MAX. PIN 1 (See Notes 1, 2) 4 (Po) 2 ±0.05 B Ø1.55 ±0.05 1.75 ±0.1 A A 5.5 ±0.05 12 ±0.3 6.30 (Bo) B 2 (Ko) SECTION B – B 6.3 (Ao) Ø1.5 MIN. 5° MAX. SECTION A – A NOTES: 1. PIN 1 ORIENTATION SHALL BE "TOP LEFT" ONLY FOR RFLGA & MCM PRODUCTS LISTED BELOW: SKY65205-11 SKY65208-11 SKY65215-11 2. PIN 1 ORIENTATION SHALL BE "TOP RIGHT" FOR ALL 6 x 6 mm RFLGA & MCM PRODUCTS EXCEPT THOSE LISTED IN NOTE 1 ABOVE. 3. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 4. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 5. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 9.3 mm WIDTH. 10 6. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 7. Po / P1 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 8. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 9. ALL DIMENSIONS ARE IN MILLIMETERS. 10. PART NO.: eC3-MCM0606-12-8-F1-L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER). 11. NUMBER OF PARTS per 13 inch (DIAMETER) x 12 mm REEL: 3000. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM/RFLGA 6 x 6 x 1.75 mm BODY SIZE GP01-D232-209A 101568_020 Figure 20. Carrier Tape Body Size: 6 x 6 x 1.75 mm – Overmold MCM / RFLGA (2 of 2) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 23 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES 8 (P1) 0.3 ±0.05 (T) +0.1 Ø1.5 –0.0 4 (Po) 2 ±0.05 1.75 ±0.1 B PIN 1 (See Notes 1, 2) 7.5 ±0.05 A A 16 ±0.3 7.39 (Bo) B 1.9 (Ko) Ø1.5 MIN. SECTION B – B 6.39 (Ao) SECTION A – A NOTES: 1. PIN 1 ORIENTATION SHALL BE "TOP LEFT" FOR ALL 6 x 6 mm RFLGA PRODUCTS & ONLY THE 6 x 6 mm MCM PRODUCTS LISTED BELOW: SKY77535-XX SKY77536-XX SKY77537-XX SKY77538-XX 2. PIN 1 ORIENTATION SHALL BE "TOP RIGHT" FOR ALL 6 x 6 mm MCM PRODUCTS EXCEPT THOSE LISTED IN NOTE 1 ABOVE. 3. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 4. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 5. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 13.3 mm WIDTH. 10 6. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 7. Po / P1, 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 8. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 9. ALL DIMENSIONS ARE IN MILLIMETERS. 10. PART NO.: eC3-LGA6x7-16-8-F1-L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER). 11. NUMBER OF PARTS per 13 inch (DIAMETER) x 16 mm REEL: 2500. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD RFLGA / MCM 6 x 7 x 1.0 mm BODY SIZE GP01-D232-155E 101568_021 Figure 21. Carrier Tape Body Size: 6 x 7 x 1.0 mm – Overmold MCM / RFLGA Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 24 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE 8 (P1) 0.3 ±0.05 A 1.75 ±0.1 Ø1.55 ±0.05 B PIN 1 2 ±0.05 4 (Po) 7.5 ±0.05 A 16 ±0.3 8.35 (Bo) 1.8 (Ko) B Ø1.5 MIN SECTION B – B 6.35 (Ao) SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE SENSITIVE ADHESIVE (PSA) MATERIAL W/13.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1, 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-MCM0608-16-8-F1-L REV. 0. PLEASE INDICATE ON PURCHASE ORDER. 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 16 mm wide REEL: 4000. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM 6 x 8 x 1.4 mm BODY SIZE GP01-D232-081D 101568_022 Figure 22. Carrier Tape Body Size: 6 x 8 x 1.4 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 25 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES 12 (P1) Ø1.55 ±0.05 0.3 ±0.05 (T) 4 (Po) 2 ±0.05 B 1.75 ±0.1 PIN 1 5° MAX. 11.5 ±0.05 A A 24 ±0.3 11.35 (Bo) 2 (Ko) B Ø1.5 MIN. SECTION B – B 6.35 (Ao) 5° MAX. SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 21.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1, 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-MCM6x11-24-12-F1-L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER). 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 21 mm REEL: 2500. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM 6 x 11 x 1.4 mm BODY SIZE GP01-D232-153A 101568_023 Figure 23. Carrier Tape Body Size: 6 x 11 x 1.4 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 26 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE 12 (P1) Ø1.55 ±0.05 4 (Po) 2 ±0.05 B 0.3 ±0.05 (T) 1.75 ±0.1 PIN 1 5° MAX. 11.5 ±0.05 A A 24 ±0.3 12.35 (Bo) 2.0 (Ko) SECTION B – B B 6.35 (Ao) Ø1.5 MIN. 5° MAX. SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 21.3 mm WIDTH. 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 1010 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-MCM6x12-24-12-F1-L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER). 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 24 mm REEL: 2000. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM 6 x 12 x 1.4 mm BODY SIZE GP01-D232-167A 101568_024 Figure 24. Carrier Tape Body Size: 6 x 12 x 1.4 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 27 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES 12 (P1) Ø1.55 ±0.05 4 (Po) 2 ±0.05 1.75 ±0.1 B 0.3 ±0.05 (T) PIN 1 5° MAX. 7.5 ±0.1 A A 16 ±0.3 7.35 (Bo) 1.7 (Ko) B Ø1.5 MIN. SECTION B – B 7.35 (Ao) 5° MAX. SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 13.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1, 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-LGA0707-16-12-F1-L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER). 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 16 mm REEL: 2000. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD RFLGA / BCC++ / MCM 7 x 7 x 1.3 / 1.0 mm BODY SIZE GP01-D232-065F 101568_025 Figure 25. Carrier Tape Body Size: 7 x 7 x 1.3 / 1.0 mm – Overmold BCC++ / MCM / RFLGA Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 28 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE 12 (P1) Ø1.55 ±0.05 2 ±0.05 4 (Po) 1.75 ±0.1 B 0.3 ±0.05 PIN 1 5° MAX. A 7.5 ±0.05 A 16 ±0.03 7.85 (Bo) 1.5 ±0.1 (Ko) B Ø1.5 MIN. SECTION B – B 5° MAX. 7.35 (Ao) SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 13.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1, 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-MCM7x7.5-16-12-F1-L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER). 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 16 mm REEL: 2000. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM 7 x 7.5 x 1.4 mm BODY SIZE GP01-D232-207A 101568_026 Figure 26. Carrier Tape Body Size: 7 x 7.5 x 1.4 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 29 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES 12 (P1) +0.1 Ø1.5 –0.0 4 (Po) 2 ±0.05 1.75 ±0.1 B 0.3 ±0.05 (T) PIN 1 5° MAX. 11.5 ±0.05 A A 24 ±0.3 11.35 (Bo) 1.9 Ko) SECTION B – B B Ø1.5 MIN. 7.35 (Ao) 5° MAX. SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 21.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1, 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-MCM7x11-24-12-F1-L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER). 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 24 mm REEL: 2000. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM 7 x 11 x 1.4 mm BODY SIZE GP01-D232-159A 101568_027 Figure 27. Carrier Tape Body Size: 7 x 11 x 1.4 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 30 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE 12 (P1) B 0.3 ±0.05 2 ±0.05 4 (Po) Ø1.55 ±0.05 1.75 ±0.1 PIN 1 (See Notes 1, 2) 7.5 ±0.05 A A 16 ±0.03 7.85 (Bo) 1.4 (Ko) SECTION B – B B Ø1.5 MIN. 7.85 (Ao) SECTION A – A NOTES: 1. PIN 1 ORIENTATION SHALL BE "TOP LEFT" ONLY FOR ALL PRODUCTS WITH 7.5 x 7.5 mm BODY SIZE LISTED BELOW: SKY77345 2. PIN 1 ORIENTATION SHALL BE "TOP RIGHT" FOR ALL PRODUCTS WITH 7.5 x 7.5 mm BODY SIZE EXCEPT ITEM LISTED IN NOTE 1. 3. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01-D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 4. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 5. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 13.3 WIDTH. 6. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1x 1010 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 7. Po/P1, 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 8. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 9. ALL DIMENSIONS ARE IN MILLIMETERS. 10. PART NO.: eC3-MCM7.5x7.5-16-12-F1-L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER). 11. NUMBER OF PARTS per 23-inch (DIAMETER) x 16 mm REEL: 2000. ePAK CARRIER TAPE CARRIER TAPE MCM 7.5 x 7.5 x 1.4 mm BODY SIZE GP01-D232-199B 101568_028 Figure 28. Carrier Tape Body Size: 7.5 x 7.5 x 1.4 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 31 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES 12 (P1) 4 (Po) 2 ±0.05 Ø1.55 ±0.05 0.3 ±0.05 5° MAX. 1.75 ±0.1 B PIN 1 (See Notes 1, 2) A 1 2 7.5 ±0.05 A 16 ±0.03 8.35 (Bo) B 1.7 (Ko) Ø1.5 MIN. SECTION B – B 8.35 (Ao) 5° MAX SECTION A – A NOTES: 1. PIN 1 ORIENTATION SHALL BE "TOP LEFT" ONLY FOR THESE RFLGA & MCM PRODUCTS: CX74963-XX CX74063-35 SKY77343-XX SKY77503-XX SKY77506-XX SKY77512-XX SKY77526-XX 2. PIN 1 ORIENTATION SHALL BE "TOP RIGHT" FOR ALL RFLGA & MCM PRODUCTS EXCEPT ITEMS LISTED IN NOTE 1. 3. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 4. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 5. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 13.3 mm WIDTH. 10 6. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 7. Po / P1, 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 8. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 9. ALL DIMENSIONS ARE IN MILLIMETERS. 10. PART NO.: eC3-MCM0808-16-12-F1-L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER). 11. NUMBER OF PARTS per 13 inch (DIAMETER) x 16 mm REEL: 2500. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM / RFLGA 8 x 8 x 1.0 / 1.3 / 1.4 mm BODY SIZE GP01-D232-085F 200008_029 Figure 29. Carrier Tape Body Size: 8 x 8 x 1.4 / 1.3 / 1.0 mm – Overmold MCM / RFLGA Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 32 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE 12 (P1) PIN 1 Ø1.5 ±0.05 4 (Po) 2 ±0.05 1.75 ±0.1 B 0.3 ±0.05 (T) 0.3 REF 7.5 ±0.05 A A 16 ±0.3 2.0 REF 10.35 (Bo) B 2 (Ko) Ø1.5 MIN. SECTION B – B 8.35 (Ao) SECTION A – A NOTES: 1. 2. 3. 4. 5. 6. 7. 8. 9. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 13.3 mm WIDTH. 10 ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. Po / P1, 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. Ao and Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. ALL DIMENSIONS ARE IN MILLIMETERS. PART NO.: eC3-MCM10x8-16-12-F1-L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER). NUMBER OF PARTS per 13 inch (DIAMETER) x 16 mm REEL: 3000. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM 8 x 10 x 1.4 mm BODY SIZE GP01-D232-079E 101568_030 Figure 30. Carrier Tape Body Size: 8 x 10 x 1.4 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 33 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES 4 ±0.1 12 ±0.1 B PIN 1 0.318 ±0.013 (T) A 2 ±0.1 Ø1.5 ±0.1 1.75 ±0.1 7.5 ±0.1 A 16 +0.30 –0.10 8.88 ±0.1 (Bo) B 5° MAX. Ø1.5 +0.25 2.14 ±0.1 (Ko) SECTION B - B 8.89 ±0.1 (Ao) 8° MAX. SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYCARBONATE OR POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 13.3 mm WIDTH. 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 108 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. TOLERANCES: .XX = ±0.1 6. ALL DIMENSIONS ARE IN MILLIMETERS. 7. PART NO.: US039321 (PLEASE INDICATE ON PURCHASE ORDER). 8. NUMBER OF PARTS per 13 inch (DIAMETER) x 16 mm REEL: 2000. 3M CARRIER TAPE CARRIER TAPE CERAMIC MCM 8.3 x 8.3 x 2.1 mm BODY SIZE GP01-D232-037D 101568_031 Figure 31. Carrier Tape Body Size: 8.3 x 8.3 x 2.1 mm – Ceramic MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 34 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES PIN 1 APPLICATION NOTE 12 (P1) Ø1.55 ±0.05 4 (Po) 2 ±0.05 1.75 ±0.1 B 0.3 ±0.05 (T) 5° MAX. 0.2 REF 0.2 REF 11.5 ±0.05 A A 24 ±0.3 9.35 (Bo) 1.5 REF 1.5 REF B 1.7 (Ko) Ø1.5 MIN. SECTION B – B 9.35 (Ao) 5° MAX. SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 21.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-LGA0909-24-12-F1-L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER). 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 24 mm REEL: 2000. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD RFLGA 9 x 9 x 1.3 / 1.0 mm BODY SIZE GP01-D232-069D 101568_032 Figure 32. Carrier Tape Body Size: 9 x 9 x 1.3 / 1.0 mm – Overmold RFLGA Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 35 APPLICATION NOTE 0.3 ±0.05 (T) TAPE AND REEL INFORMATION – RF MODULES 12 ±0.1 PIN 1 4 ±0.1 Ø1.5 ±0.1 2 ±0.1 1.75 ±0.1 5° MAX B A A 7.5 ±0.1 16 ±0.3 9.3 ±0.1 (Bo) B 1.8 ±0.1 1.5 MIN. SECTION B – B 10.3 ±0.1 (Ao) 5° MAX SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 13.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. TOLERANCES: .XX = ±0.1 6. ALL DIMENSIONS ARE IN MILLIMETERS. 7. PART NO.: KS1612-181 (PLEASE INDICATE ON PURCHASE ORDER). 8. NUMBER OF PARTS per 13 inch (DIAMETER) x 16 mm REEL: 2000. KOSTAT CARRIER TAPE CARRIER TAPE OVERMOLD MCM 9 x 10 x 1.4 mm BODY SIZE GP01-D232-123C 101568_033 Figure 33. Carrier Tape Body Size: 9 x 10 x 1.4 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 36 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE Ø1.55 ±0.05 0.3 ±0.05 (T) 12 (P1) 4 (Po) 2 ±0.05 1.75 ±0.1 B PIN 1 11.5 ±0.05 A A 24 ±0.3 12.3 (Bo) 1.8 (Ko) SECTION B – B B Ø1.5 MIN. 9.3 (Ao) SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYCARBONATE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 21.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2. 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-MCM0912-24-12-F1-L (PLEASE INDICATE ON PURCHASE ORDER). 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 24 mm REEL: 2000. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM 9 x 12 x 1.4 mm BODY SIZE GP01-D232-135A 101568_034 Figure 34. Carrier Tape Body Size: 9 x 12 x 1.4 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 37 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES 2 ±0.05 4 (Po) 12 (P1) Ø1.55 ±0.05 B 0.3 ±0.05 1.75 ±0.1 PIN 1 5° MAX. 11.5 ±0.05 A A 24 ±0.3 1.5 REF 0.2 REF 12 (Bo) 0.2 REF 1.5 REF B 2 (Ko) Ø1.5 MIN SECTION B – B 9.45 (Ao) 5° MAX. SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 21.3 mm WIDTH. 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 1010 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1, 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 6. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3–MCM11.6X9.1x1.4–24–12–F1–L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER). 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 24 mm REEL: 2000. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM 9.1 x 11.6 x 1.4 mm BODY SIZE GP01-D232-039D 101568_035 Figure 35. Carrier Tape Body Size: 9.1 x 11.6 x 1.4 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 38 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE 4 (Po) 16 (P1) Ø1.5 ±0.05 2 ±0.05 1.75 ±0.1 B 0.3 ±0.05 PIN 1 40° 11.5 ±0.05 A A 24 ±0.3 10.35 (Bo) 5° 1.9 (Ko) 0.8 B SECTION B – B 40° 10.35 (Ao) Ø1.5 MIN. 5° SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 21.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. Po / P1 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 6. Ao & Bo MEASUREMENT POINT TO BE .03 mm FROM BOTTOM POCKET. 7. ALL DIMENSIONS ARE IN MILLIMETERS. 8. PART NO.: eC3-FPBGA1010-24-16-F1-L REV.0. (PLEASE INDICATE ON PURCHASE ORDER). 9. NUMBER OF PARTS per 13 inch (DIAMETER) x 24 mm REEL: 1000. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD RFLGA 10 x 10 x 1.0 mm BODY SIZE GP01-D232-051E 101568_036 Figure 36. Carrier Tape Body Size: 10 x 10 x 1.0 mm – Overmold FPBGA Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 39 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES PIN 1 (NOTE 1) 0.3 ±0.05 12 (P1) 4 (Po) 2 ±0.05 Ø1.55 ±0.05 B PIN 1 (NOTE 2) 1.75 ±0.1 11.5 ±0.05 A A 24 ±0.3 1.5 REF 0.2 REF 14.35 (Bo) 0.2 REF 1.5 REF 5° MAX. B 2 (Ko) Ø1.5 MIN. SECTION B – B 10.35 (Ao) 5° MAX. SECTION A – A NOTES: 1. REFERS TO ORIENTATION OF PIN 1 OF A 10.04 X 14.04 mm PACKAGE WITH A 1.3 mm MOLD CAP. 2. REFERS TO ORIENTATION OF PIN 1 OF A 10.04 X 14.04 mm PACKAGE WITH A 0.5 mm OR 1.0 mm MOLD CAP. 3. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 4. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 5. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 21.3 mm WIDTH. 10 6. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 7. Po / P1, 10 PITCHES CUMULATIVE TOLERANCE ON TAPE: ±0.2 mm. 8. Ao & Bo MEASUREMENT POINT TO BE 0.3 mm FROM BOTTOM POCKET. 9. ALL DIMENSIONS ARE IN MILLIMETERS. 10. PART NO.: eC3–MCM10x14–24–12–F1–L REV. 0 (PLEASE INDICATE ON PURCHASE ORDER). 11. NUMBER OF PARTS per 13 inch (DIAMETER) x 24 mm REEL: 2500. ePAK CARRIER TAPE CARRIER TAPE OVERMOLD MCM 10 x 14 x 1.4 BODY SIZE GP01-D232-063E 101568_037 Figure 37. Carrier Tape Body Size: 10 x 14 x 1.4 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 40 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I TAPE AND REEL INFORMATION – RF MODULES APPLICATION NOTE 0.30 ±0.05 (T) 2 ±0.1 4 ±0.1 16 ±0.1 Ø1.5 ±0.1 B 1.75 ±0.1 8° MAX. PIN 1 A 11.5 ±0.1 A 24 ±0.3 13.3 ±0.1 (Bo) B 1.5 MIN. 2 ±0.1 (Ko) SECTION B – B 13.3 ±0.1 (Ao) 8° MAX. SECTION A – A NOTES: 1. CARRIER TAPES MUST MEET ALL REQUIREMENTS OF SKYWORKS GP01–D232 PROCUREMENT SPEC FOR TAPE AND REEL SHIPPING. 2. CARRIER TAPE SHALL BE BLACK CONDUCTIVE POLYSTYRENE. 3. COVER TAPE SHALL BE TRANSPARENT CONDUCTIVE PRESSURE-SENSITIVE ADHESIVE (PSA) MATERIAL W/ 21.3 mm WIDTH. 10 4. ESD-SURFACE RESISTIVITY SHALL BE ≤ 1 X 10 OHMS/SQUARE PER EIA, JEDEC TNR SPECIFICATION. 5. TOLERANCE: .XX = ±0.10 6. ALL DIMENSIONS ARE IN MILLIMETERS. 7. PART NO.: KS2416-139 (PLEASE INDICATE ON PURCHASE ORDER). 8. NUMBER OF PARTS per 13 inch (DIAMETER) x 24 mm REEL: 1000. KOSTAT CARRIER TAPE CARRIER TAPE OVERMOLD MCM 13 x 13 x 1.8 / 1.4 mm BODY SIZE GP01-D232-125B 101568_038 Figure 38. Carrier Tape Body Size: 13 x 13 x 1.8 / 1.4 mm – Overmold MCM Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 101568I • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • June 9, 2008 41 APPLICATION NOTE TAPE AND REEL INFORMATION – RF MODULES Figure 39. Typical Tape and Reel Showing Unreeling Direction Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 42 June 9, 2008 • Skyworks Proprietary Information. • Products and product information are subject to change without notice. • 101568I General Information: Skyworks Solutions, Inc. 20 Sylvan Road Woburn, MA 01801 www.skyworksinc.com