SKY67150-396LF - Skyworks Solutions, Inc.

DATA SHEET
SKY67150-396LF: 300 to 2200 MHz Ultra Low-Noise
Amplifier
Applications
 LTE, GSM, WCDMA, HSDPA macro and micro base stations
 UHF and L-band ultra low-noise receivers
 Cellular repeaters, DAS and RRH/RRUs
 High temperature transceiver applications to +105 °C
RFOUT/VDD
RFIN
ENABLE
Active
Bias
VBIAS
Features
 Ultra-low Evaluation Board NF of 0.23 dB @ 849 MHz
 High OIP3 performance: +39 dBm
 Adjustable supply current from 20 to 100 mA
 Flexible bias voltage: 3 to 5 V
 Temperature and process-stable active bias
 Miniature DFN (8-pin, 2 x 2 mm) package (MSL1 @ 260 C per
JEDEC J-STD-020)
Skyworks Green™ products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green™, document number
SQ04-0074.
Y0003
Figure 1. SKY67150-396LF Block Diagram
Description
The SKY67150-396LF is GaAs, pHEMT low-noise amplifier (LNA)
with an active bias, high linearity, superior gain, and industryleading noise figure (NF) performance. The device features
Skyworks advanced, pHEMT enhancement mode process in a
compact 2 x 2 mm, 8-pin Dual Flat No-Lead (DFN) package.
The internal active bias circuitry provides stable performance over
temperature and process variation. The device offers the ability to
externally adjust supply current. Supply voltage is applied to the
RFOUT/VDD pin through an RF choke inductor. The RFIN and
RFOUT/VDD pins should be DC blocked to ensure proper
operation.
The SKY67150-396LF operates in the frequency range of 300 to
2200 MHz using a common layout and band-specific tunes.
Operation with high gain and a low NF at frequencies as low as
100 MHz is possible with degraded input return loss.
N/C
1
8
N/C
RFIN
2
7
RFOUT/VDD
VBIAS
3
6
ENABLE
N/C
4
5
N/C
A functional block diagram is shown in Figure 1. The pin
configuration and package are shown in Figure 2. Signal pin
assignments and functional pin descriptions are provided in
Table 1.
Y0004
Figure 2. SKY67150-396LF Pinout – 8-Pin DFN
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202922G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice June 23, 2014
1
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
Table 1. SKY67150-396LF Signal Descriptions
Pin
Name
Description
Pin
Name
Description
1
N/C
No connection. May be connected to ground
with no change in performance.
5
N/C
No connection. May be connected to ground
with no change in performance.
2
RFIN
RF input. DC blocking capacitor required.
6
ENABLE
Enable pin. Active low = amplifier “on” state
3
VBIAS
Bias voltage for input gate. External resistor
sets current consumption.
7
RFOUT/VDD
RF output. Apply VDD through RF choke
inductor. DC blocking capacitor required.
4
N/C
No connection. May be connected to ground
with no change in performance.
8
N/C
No connection. May be connected to ground
with no change in performance.
Electrical and Mechanical Specifications
Typical performance characteristics are illustrated in Figures 3
through 21.
The absolute maximum ratings of the SKY67150-396LF are
provided in Table 2. Electrical specifications are provided in
Tables 3 through 7.
Table 2. SKY67150-396LF Absolute Maximum Ratings (Note 1)
Maximum
Units
Supply voltage
Parameter
VDD
Symbol
Minimum
5.5
V
Quiescent supply current
IDQ
120
mA
RF input power
PIN
+21
dBm
Storage temperature
TSTG
–40
+150
C
Operating temperature
TA
–40
+105
C
Junction temperature
TJ
+150
C
Electrostatic discharge:
Charged Device Model (CDM), Class 4
Human Body Model (HBM), Class 1A
Machine Model (MM), Class A
ESD
1000
250
30
V
V
V
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. SKY67150-396LF Electrical Specifications: Thermal Data (Note 1)
(VDD = 5 V, TA = +25 C, PIN = –25 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
ΘJC
Thermal resistance
Channel temperature @ +85 °C reference
(package heat slug)
VDD = 5 V, IDQ = 82 mA, no
RF applied, dissipated
power = 0.35 W
Min
Typical
Max
45
°C/W
103
°C
Note 1: Performance is guaranteed only under the conditions listed in this table.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
2
Units
June 23, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202922G
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
Table 4. SKY67150-396LF Electrical Specifications: 650 to 1100 MHz Optimized Tuning (Note 1)
(VDD = 5 V, TA = +25 C, PIN = –20 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typical
Max
Units
0.23
0.38
dB
RF Specifications
Noise Figure
NF
@ 849 MHz, includes
Evaluation Board loss
Small signal gain
|S21|
@ 849 MHz
Input return loss
|S11|
Output return loss
|S22|
Reverse isolation
3rd Order Input Intercept Point
rd
3 Order Output Intercept Point
20.5
dB
@ 849 MHz
11
dB
@ 849 MHz
20
dB
|S12|
@ 849 MHz
28
dB
IIP3
@ 849 MHz,
Δf = 1 MHz,
PIN = –20 dBm/tone
+15.5
+18.5
dBm
@ 849 MHz,
Δf = 1 MHz,
PIN = –20 dBm/tone
+36
+39
dBm
OIP3
19.0
1 dB Input Compression Point
IP1dB
@ 849 MHz
–0.5
+1.5
dBm
1 dB Output Compression Point
OP1dB
@ 849 MHz
+19
+21
dBm
5
V
DC Specifications
Supply voltage
VDD
Quiescent supply current
IDQ
Bias current
IBIAS
Enable voltage:
Gain mode
Power-down mode
VENABLE
Set with external resistor
70
82
95
0
1.5
mA
μA
500
0.2
5.5
V
V
Note 1: Performance is guaranteed only under the conditions listed in this table.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202922G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 23, 2014
3
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
Typical Performance Characteristics, 650 to 1100 MHz
(VDD = 5 V, TA = +25 C, PIN = –20 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
0.7
25
–40 °C
+25 °C
+85 °C
+105 °C
–40 °C
+25 °C
+85 °C
+105 °C
24
23
Small Signal Gain (dB)
Noise Figure (dB)
0.6
0.5
0.4
0.3
0.2
0.1
22
21
20
19
18
17
16
0
600
650
700
750
800
850
900
950
15
600
1000 1050 1100 1150 1200
650
700
750
800
Frequency (MHz)
Figure 3. Evaluation Board NF vs Frequency over Temperature
1000 1050 1100 1150 1200
–40 °C
+25 °C
+85 °C
+105 °C
–9
–10
Input Return Loss (dB)
+10
Small Signal Gain (dB)
950
–8
–40 °C
+25 °C
+85 °C
+105 °C
+20
0
–10
–20
–30
–40
–50
–60
–11
–12
–13
–14
–15
–16
–17
–18
–70
–19
–80
0
2
4
6
8
10
12
14
16
18
20
22
–20
600
24
650
700
750
800
850
900
950
1000 1050 1100 1150 1200
Frequency (MHz)
Frequency (GHz)
Figure 6. Narrowband Input Return Loss vs Frequency over
Temperature
Figure 5. Broadband Gain vs Frequency over
Temperature
+2
–27.0
0
–27.5
–2
–28.0
Reverse Isolation (dB)
Input Return Loss (dB)
900
Figure 4. Narrow Band Gain vs Frequency over Temperature
+30
–4
–6
–8
–10
–12
–40 °C
+25 °C
+85 °C
+105 °C
–14
–16
–18
850
Frequency (MHz)
0
2
4
6
8
10
12
14
16
18
20
22
–28.5
–29.0
–29.5
–30.0
–30.5
–40 °C
+25 °C
+85 °C
+105 °C
–31.0
–31.5
24
Frequency (GHz)
Figure 7. Broadband Input Return Loss vs Frequency over
Temperature
–32.0
600
650
700
750
800
850
900
950
1000 1050 1100 1150 1200
Frequency (MHz)
Figure 8. Narrowband Reverse Isolation vs Frequency over
Temperature
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
4
June 23, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202922G
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
0
–5
–10
Output Return Loss (dB)
Reverse Isolation (dB)
–10
–20
–30
–40
–50
–60
–40 °C
+25 °C
+85 °C
+105 °C
–70
–80
0
2
4
6
8
10
12
14
16
18
20
22
–15
–20
–25
–40 °C
+25 °C
+85 °C
+105 °C
–30
–35
600
24
650
700
750
800
Frequency (GHz)
850
900
950
1000 1050 1100 1150 1200
Frequency (MHz)
Figure 9. Broadband Reverse Isolation vs Frequency over
Temperature
Figure 10. Narrowband Output Return Loss vs Frequency over
Temperature
+2
6
–40 °C
+25 °C
+85 °C
+105 °C
5
–2
Stability Factor (μ1)
Output Return Loss (dB)
0
–4
–6
–8
–10
–12
–40 °C
+25 °C
+85 °C
+105 °C
–14
–16
–18
4
3
2
1
0
0
2
4
6
8
10
12
14
16
18
20
22
24
0
2
4
6
Figure 11. Broadband Output Return Loss vs Frequency over
Temperature
10
12
14
16
18
20
22
24
Figure 12. Stability Factor (μ1) vs Frequency over Temperature
6
0.50
0.45
–40 °C
+25 °C
+85 °C
+105 °C
0.40
Noise Figure (dB)
5
Stability Factor (μ2)
8
Frequency (GHz)
Frequency (GHz)
4
3
2
0.35
0.30
0.25
0.20
0.15
0.10
1
0.05
0
0
0
2
4
6
8
10
12
14
16
18
20
22
24
Frequency (GHz)
Figure 13. Stability Factor (μ2) vs Frequency over Temperature
20
30
40
50
60
70
80
90
100
Quiescent Current (mA)
Figure 14. Evaluation Board NF vs Quiescent Current over
Frequency Using Band-Specific BOM (@ 849 MHz)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202922G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 23, 2014
5
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
45
+45
–40 °C
+40
+25 °C
+85 °C
+105 °C
+35
+30
OIP3 (dBm)
OIP3 (dBm)
40
35
30
+25
+20
+15
+10
Y1046
25
20
–20
+5
0
–18
–16
–14
–12
–10
–8
–6
–4
20
30
Input Power Over Temperature (dBm)
40
50
60
70
80
90
100
Quiescent Current (mA)
Figure 15. OIP3 vs Input Power Over Temperature
(@849 MHz, 1MHz Spacing)
Figure 16. OIP3 vs Quiescent Current over Frequency
Using Band-Specific BOM (@ 849 MHz)
Table 5. SKY67150-396LF Electrical Specifications: 380 to 530 MHz Optimized Tuning (Note 1)
(VDD = 5 V, TA = +25 C, PIN = –25 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typical
Max
Units
0.45
0.60
dB
RF Specifications
Noise figure
NF
@ 450 MHz, includes
Evaluation Board loss
Small signal gain
|S21|
@ 450 MHz
Input return loss
|S11|
Output return loss
|S22|
Reverse isolation
rd
3 Order Input Intercept Point
3rd Order Output Intercept Point
23.0
dB
@ 450 MHz
12
dB
@ 450 MHz
20
dB
|S12|
@ 450 MHz
33
dB
IIP3
@ 450 MHz, Δf = 1 MHz,
PIN = –25 dBm/tone
+10
+13
@ 450 MHz, Δf = 1 MHz,
PIN = –25 dBm/tone
+33
+36
OIP3
21.5
dBm
dBm
1 dB Input Compression Point
IP1dB
@ 450 MHz
–5
–3
dBm
1 dB Output Compression Point
OP1dB
@ 450 MHz
+17
+19
dBm
5
V
82
mA
500
μA
DC Specifications
Supply voltage
VDD
Quiescent supply current
IDQ
Bias current
IBIAS
Set with external resistor
Note 1: Performance is guaranteed only under the conditions listed in this table.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
6
June 23, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202922G
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
Table 6. SKY67150-396LF Electrical Specifications: 1400 to 2200 MHz Optimized Tuning (Note 1)
(VDD = 5 V, TA = +25 C, PIN = –25 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typical
Max
Units
0.38
0.53
dB
RF Specifications
Noise figure
NF
@ 1900 MHz, includes
Evaluation Board loss
Small signal gain
|S21|
@ 1900 MHz
Input return loss
|S11|
Output return loss
|S22|
Reverse isolation
3rd Order Input Intercept Point
rd
3 Order Output Intercept Point
14.5
dB
@ 1900 MHz
17
dB
@ 1900 MHz
20
dB
|S12|
@ 1900 MHz
23
IIP3
@ 1900 MHz, Δf = 1 MHz,
PIN = –25 dBm/tone
+19
+22
@ 1900 MHz, Δf = 1 MHz,
PIN = –25 dBm/tone
+33.5
+36.5
OIP3
13.0
dB
dBm
dBm
1 dB Input Compression Point
IP1dB
@ 1900 MHz
+2.5
+4.5
dBm
1 dB Output Compression Point
OP1dB
@ 1900 MHz
+16
+18
dBm
5
V
82
mA
500
μA
DC Specifications
Supply voltage
VDD
Quiescent supply current
IDQ
Bias current
IBIAS
Set with external resistor
Note 1: Performance is guaranteed only under the conditions listed in this table.
+30
2.00
+30
S11
Gain
S22
NF
+10
+5
0
–5
1.50
1.25
1.00
–10
–15
–20
0.75
–25
–30
0.50
–35
–40
0.25
1.75
+20
+15
1.50
+10
S11
Gain
S22
NF
+5
0
–5
1.25
1.00
–10
–15
0.75
–20
–25
Noise Figure (dB)
+15
Return Loss & Small Signal Gain (dB)
1.75
+20
Noise Figure (dB)
Return Loss & Small Signal Gain (dB)
2.00
+25
+25
0.50
–30
–35
0.25
–40
0
–55
300
350
400
450
500
550
600
0.00
–45
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
Frequency (MHz)
Frequency (GHz)
Figure 17. Evaluation Board NF, Gain, and Return Losses for 380
to 530 MHz Tuning
Figure 18. Evaluation Board NF, Gain, and Return Losses for 1400
to 2200 MHz Tuning
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202922G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 23, 2014
7
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
Table 7. Noise Parameters vs Frequency (@ +25 °C, 5 V, 70 mA)
Frequency
(GHz)
FMIN
(dB)
Gamma opt
(Mag)
Gamma opt
(Phase)
Noise Resistance (RN)
(Ω)
Associated Gain
(dB)
Maximum Gain (GMAX)
(dB)
0.4
0.3356
0.3898
–1.65
0.063
26.874
26.7297
0.45
0.3187
0.3471
2.44
0.0318
26.112
26.0677
0.5
0.3287
0.1473
–60.08
0.0484
25.6849
25.666
0.55
0.303
0.3392
6.77
0.0432
24.8282
24.8229
0.6
0.2702
0.2931
7.19
0.0347
24.2668
24.2489
0.65
0.2682
0.3336
19.52
0.0416
23.7339
23.7001
0.7
0.2735
0.3735
15.75
0.0508
23.2435
23.2303
0.75
0.2517
0.3303
18.12
0.0434
22.7786
22.7593
0.8
0.1996
0.2104
40.79
0.0494
22.3308
22.1323
0.85
0.1908
0.334
16.5
0.0628
21.9055
21.8755
0.9
0.1925
0.373
21
0.0341
21.501
21.4886
0.95
0.1946
0.3857
39.09
0.0271
21.1104
21.0495
1.1
0.2164
0.3831
34.68
0.0574
20.0289
20.0043
1.2
0.2327
0.3597
40.72
0.0665
19.3803
19.3273
1.3
0.2482
0.3419
41.76
0.049
18.7816
18.703
1.4
0.2798
0.3207
48.16
0.0573
18.2235
18.1058
1.5
0.3092
0.2854
59.17
0.0532
17.7114
17.5101
1.6
0.3287
0.312
75.86
0.0976
17.2272
16.9687
1.8
0.3516
0.4428
68.41
0.1833
16.34
16.2997
2.1
0.4897
0.4233
71.86
0.1996
15.1948
15.1438
2.3
0.5014
0.2079
70.76
0.0591
14.5509
14.0753
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
8
June 23, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202922G
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
Swept F1 Load Gamma Pull
Freq = 0.4500 GHz
ΓSource: 0.4332< 27.58
Load
Ip3
max = 39.29 dBm
at 0.5981< 99.88
5 contours, 0.50 dBm step
(37.00 to 39.00 dBm)
Gt
max = 27.13 dB
at 0.1978< 94.24
5 contours, 0.50 dB step
(25.00 to 27.00 dB)
Specs: OFF
Y0540
Figure 19. OIP3 Load Pull @ 450 MHz, 5 V, 70 mA (Input Load = Min NF, –20 dBm/tone, 5 MHz Spacing)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202922G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 23, 2014
9
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
Load
Swept F1 Load Gamma Pull
Freq = 0.9000 GHz
ΓSource: 0.3655< 16.76
Ip3
max = 37.05 dBm
at 0.3107< 170.63
5 contours, 0.50 dBm step
(35.00 to 37.00 dBm)
Gt
max = 21.90 dB
at 0.3914< 162.55
5 contours, 0.50 dB step
(19.50 to 21.50 dB)
Specs: OFF
Y0539
Figure 20. OIP3 Load Pull @ 900 MHz, 5 V, 70 mA (Input Load = Min NF, –20 dBm/tone, 5 MHz Spacing)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
10
June 23, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202922G
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
Swept F1 Load Gamma Pull
Freq = 1.9000 GHz
ΓSource: 0.4514< 66.52
Load
Ip3
max = 35.04 dBm
at 0.2558< 76.52
5 contours, 0.50 dBm step
(33.00 to 35.00 dBm)
Gt
max = 17.16 dB
at 0.4627< 13.81
5 contours, 0.50 dB step
(15.00 to 17.00 dB)
Specs: OFF
Y0538
Figure 21. OIP3 Load Pull @1900 MHz, 5 V, 70 mA (Input Load = Min NF, –20 dBm/tone, 5 MHz Spacing)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202922G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 23, 2014
11
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
Evaluation Board Description
Package and Handling Information
The SKY67150-396LF Evaluation Board is used to test the
performance of the SKY67150-396LF LNA. Three different boards
are available for different frequency operations: 650 to 1100 MHz,
380 to 530 MHz, and 1400 to 2200 MHz.
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
An assembly drawing for the Evaluation Board is shown in
Figure 22. The layer detail is provided in Figure 23. An Evaluation
Board schematic diagram is provided in Figure 24. Tables 8, 9,
and 10 provide the Bill of Materials (BOM) list for the three
different Evaluation Board tuning frequencies.
Package Dimensions
The PCB layout footprint for the SKY67150-396LF is provided in
Figure 25. Typical case markings are shown in Figure 26.
Package dimensions for the 8-pin DFN are shown in Figure 27,
and tape and reel dimensions are provided in Figure 28.
The SKY67150-396LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
12
June 23, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202922G
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
S3505
Figure 22. SKY67150-396LF Evaluation Board Assembly Diagram
Cross Section
Name Thickness (mm) Material
MSK-NS
TRA-NS
0.03556
Cu foil
Laminate
0.254 ± 0.152
Rogers 4350B
0.0178
Cu foil
TRA-2
Laminate
TRA-3
Laminate
TRA-FS
0.889 nom. FR4 Prepreg (Note 1)
0.0178
Cu foil
0.254 ± 0.152
FR4 Core
0.0178
Cu foil
MSK-PS
Note 1: Adjust this thickness to meet total thickness goal.
General Notes:
Material: Rogers R04350, εr = 3.66
Layer 1 thickness: 0.254 mm
Overall board thickness: 1.575 mm
50 Ω transmission line width: 0.522 mm
Coplanar ground spacing: 0.394 mm
Via diameter: 0.254 mm
S2530
Figure 23. Layer Detail Physical Characteristics
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202922G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 23, 2014
13
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
VDD
GND
VBIAS
GND
GND
ENABLE
6-Pin Header
VBIAS
VDD
+–
+–
M16
M8
M7
M6
M9
1
×
M1
8
N/C
M3
N/C
2
RF Input
7
RFIN
M2
RF Output
M13
6
4
×
M14
M15
ENABLE
VBIAS
M5
M11
M12
RFOUT/VDD
3
M4
× M10
5
N/C
N/C
M17
×
Enable
+–
S3504
Figure 24. SKY67150-396LF Evaluation Board Schematic
Table 8. SKY67150-396LF Evaluation Board Bill of Materials (650 to 1100 MHz Tuning)
Component
M1
Description
Inductor
M2, M7
M3
Value
8.2 nH
Size
Manufacturer
Part Number
0603
Coilcraft HP
0603HP-8N2X_L
DNP
Capacitor
20 pF
0402
Murata GJM
GJM1555C1H200JB01
M4
Inductor
100 nH
0402
Coilcraft HP
0402HPH-R10X_L
M5, M17
Capacitor
1000 pF
0402
Murata GRM
GRM1555C1H102JZ01
M6
Resistor
9.1 kΩ
0402
Kamaya RMC, 1/16S 1%
RMC1/16S-9101FTH
M8
Capacitor
10000 pF
0402
Murata GRM
GRM155R71H103KA88
M9, M12
Capacitor
10 pF
0402
Murata GRM
GRM1555C1H100JZ01
M10
Inductor
10 nH
0402
Murata LQG
LQG15HS10NJ02
M11
Resistor
562 Ω
0402
Kamaya RMC, 1/16S 1%
RMC1/16SK5620FTH
M13
Capacitor
2.2 pF
0402
Murata GRM
GRM1555C1H2R2CZ01
M14, M16
Resistor
0Ω
0402
Kamaya RMC, 1/16S
RMC1/16SJPTH
M15
Resistor
1 kΩ
0402
Kamaya RMC, 1/16S 1%
RMC1/16SK1001FTH
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
14
June 23, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202922G
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
Table 9. SKY67150-396LF Evaluation Board Bill of Materials (380 to 530 MHz Tuning)
Component
M1
Description
Inductor
M2, M7, M15
M3
Value
12 nH
Size
Manufacturer
Part Number
0603
Coilcraft HP
0603HP-12NX_L
DNP
Capacitor
20 pF
0402
Murata GJM
GJM1555C1H200JB01
M4
Inductor
150 nH
0402
Coilcraft HP
0402HPH-R15X_L
M5, M17
Capacitor
1000 pF
0402
Murata GRM
GRM1555C1H102JZ01
M6
Resistor
9.1 kΩ
0402
Kamaya RMC, 1/16S 1%
RMC1/16S-9101FTH
M8
Capacitor
10000 pF
0402
Murata GRM
GRM155R71H103KA88
M9, M12
Capacitor
10 pF
0402
Murata GRM
GRM1555C1H100JZ01
M10
Inductor
22 nH
0402
Murata LQG
LQG15HS22NJ02
M11
Resistor
330 Ω
0402
Kamaya RMC, 1/16S 1%
RMC1/16SK3300FTH
M13
Capacitor
1.8 pF
0402
Murata GRM
GRM1555C1H1R8CZ01
M14
Resistor
15 Ω
0402
Kamaya RMC, 1/16S
RMC1/16SK15R0FTH
M16
Resistor
0Ω
0402
Kamaya RMC, 1/16S
RMC1/16SJPTH
Table 10. SKY67150-396LF Evaluation Board Bill of Materials (1400 to 2200 MHz Tuning)
Component
M1
Description
Value
Capacitor
20 pF
Inductor
M4
M5
M6
Resistor
Manufacturer
Part Number
0402
Murata GJM
GJM1555C1H200JB01
2.7 nH
0402
Coilcraft HP
0402HP-2N7XJ_L
Inductor
12 nH
0402
Coilcraft HP
0402HP-12NX_L
Capacitor
1000 pF
0402
Murata GRM
GRM1555C1H102JZ01
9.1 k
0402
Kamaya RMC 1/16S 1%
RMC1/16S-9101FTH
M2
M3
Size
DNP
M7
DNP
M8
Capacitor
10,000 pF
0402
Murata GRM
GRM155R71H103KA88
M9
Capacitor
10 pF
0402
Murata GRM
GRM1555C1H100JZ01
M10
Inductor
12 nH
0402
Coilcraft HP
0402HP-12NX_L
M11
Resistor
562 Ω
0402
Kamaya RMC 1/16S 1%
RMC1/16SK5620FTH
M12
Inductor
3.3 nH
0402
Murata LQG
LQG15HS3N3S02
0402
Murata GRM
GRM1555C1H101JZ01
M13
M14
DNP
Capacitor
M15
100 pF
DNP
M16
Resistor
0Ω
0402
Kamaya RMC 1/16S
RMC1/16SJPTH
M17
Capacitor
1000 pF
0402
Murata GRM
GRM1555C1H102JZ01
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202922G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 23, 2014
15
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
8X 0.70
8X 0.45
R0.20
Pin 1
8X 0.25
0.50 Pitch
2X 0.85
0.25
2X 0.45
Exposed Solder Areas
(Typical)
All dimensions are in millimeters
Y0005
Figure 25. SKY67150-396LF PCB Layout Footprint
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
16
June 23, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202922G
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
Pin 1
Indicator
Skyworks P/N
Figure 26. Typical Case Markings
(Top View)
0.90 +0.10/–0.15
C
2
0.20 Ref
Seating Plane
A
B
0.45 +0.05/–0.07
Exposed Pad
Detail A
0.02 +0.03/–0.02
Pin 1
Indicator
-B-
2
0.15 C
2X
8X
3
0.08 C
Detail C
0.75 ±0.05
0.15 C
2X
1.70 +0.10/–0.15
0.85 +0.05/–0.07
Detail B
2 Places
0.10 C
Top View
Side View
Bottom View
R0.12 Typ
0.25
0.30 ± 0.10
-A-
CL
R0.20
Pin 1 Indicator
0.5
0.25 +0.05/–0.07 5
0.10 M C A B
0.05 M C
Detail C
8 Places
Detail B
Detail A
All measurements are in millimeters.
Dimensioning and tolerancing according to ASME Y14.5M-1994.
Coplanarity applies to the exposed heat sink slug as well as the terminals..
Plating requirement per source control drawing (SCD) 2504.
Dimension applies to metalized terminal and is measured between 0.15 mm and 0.30 mm from terminal tip.
S1945
Figure 27. SKY67150-396LF 8-Pin DFN Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202922G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 23, 2014
17
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
∅1.50+ 0.10/–0.00
0.30 ± 0.05 (T)
Pin #1
4.00 ± 0.10
2.00 ± 0.05
4.00 (see Note 4)
1.75 ± 0.10
2.30 (Bo)
A
B
1.00 (Ko)
2.30 (Ao)
8.00 +0.30/–0.10
A
3.50 ± 0.05
B
∅1.00 Min.
R0.30 Typ.
B
Notes:
1. Carrier tape: black conductive polystyrene.
2. Cover tape material: transparent conductive HSA.
3. Cover tape size: 5.40 mm width.
4. Ten sprocket hole pitch cumulative tolerance = ±0.20 mm.
5. ESD surface resistivity is ≤1 x 108 Ohms/square per EIA, JEDEC
tape and reel specification.
6. Ao and Bo measurement point to be 0.30 mm from bottom pocket.
7. All measurements are in millimeters.
A
Figure 28. SKY67150-396LF Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
18
June 23, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202922G
S1601
DATA SHEET • SKY67150-396LF: ULTRA LOW-NOISE AMPLIFIER
Ordering Information
Model Name
SKY67150-396LF LNA
Manufacturing Part Number
SKY67150-396LF
Evaluation Board Part Number
SKY67150-396LF-EVB (650-1100 MHz)
SKY67150-396LF-EVB (380-530 MHz)
SKY67150-396LF-EVB (1400-2200 MHz)
Copyright © 2013-2014 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by
reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202922G • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 23, 2014
19