Threshold Detector .1 to 6 GHz Technical Data PSD-6002-25 Features Description Pin Configuration • Frequency Range: 0.1 to 6 GHz usable to 8 GHz The PSD-6002 is a microwave threshold detector which provides a TTL “1” output for RF input levels above a settable threshold. It contains a Schottky diode detector, a precision amp, comparator and a temperature compensated voltage reference. The unit is built with chip and wire construction on a thin-film substrate for small size and ruggedness. SM-25DD • Threshold Externally Programmable with Resistor or Voltage • Temperature Compensated • TTL Output • 12 mA (typ) Power Consumption @ +15 VDC • Surface Mount Package V+ RFIN TTL OUT THRESHOLD CONTROL Applications • Channel Activity Monitoring • Excessive VSWR Indicator • Gain Switch Control Schematic Maximum Ratings Parameter V+ RFIN – + + – THRESHOLD TTL OUT DC Voltage DC Voltage Reference Continuous RF Input Power Operating Case Temperature Storage Temperature “R” Series Burn-In Temperature Maximum ±17 Volts ±2 Volts +15 dBm –55 to +125°C –62 to +150°C +125°C Thermal Characteristics θJC Temperature Rise (No Load) Temperature Rise (Output S.C.) Weight: (typical) 0.5 grams 35°C/W 15°C 45°C 6002 Series 2 Electrical Specifications (Measured in 50 Ω system @ +15 VDC nominal unless otherwise noted) Symbol — — Typical Guaranteed Specifications Unit TC = 25°C TC = 0 to 50°C TC = –55 to +85°C Characteristic Frequency (Min.) .1–6 Input Flatness (Max.) ±0.7 Pin = -10 to +10 dBm Input Operating Range -10 to +10 Input VSWR (Max.), PIN = -10 dBm 1.5:1 Threshold Temperature Stability (Max.) @ -10 dBm Input Power — @ 0 dBm Input Power — @ +10 dBm Input Power — Threshold Level Control @ -10 dBm Input Power 75/220 @ 0 dBm Input Power 250/800 @ +10 dBm Input Power 900/3100 Threshold Hysteresis Resistance Control 0.5 Voltage Control 0.1 Control Terminal Current 0.3 Output Compatibility TTL Output Above PIN Threshold (Min.) 2.7 Output Short Circuit Current (Min.) 3.0 Output Sink Current (Min.), V0 = 0.7V 2.0 Output for Input Power Change > 3 dB above CW Threshold Rise Time 30 Fall Time 80 Propagation Delay 1000 Supply Voltage +15 As Specified +11 to +16 Operational Supply Current @ +15 Volts (Max.) 12 — — — — — — — — — — — — — .1–6 ±1.0 .1–6 ±1.0 GHz dB -10 to +10 2.0:1 -10 to +10 2.0:1 dBm — ±1.0 ±0.7 ±0.5 ±1.5 ±1.0 ±0.7 dB dB dB — — — — — — mV/Ω mV/Ω mV/Ω — — — TTL 2.7 2.0 2.0 — — — TTL 2.7 2.0 2.0 dB dB mA — V mA mA — — — — — — ns ns ns — — 15 — — 15 VDC VDC mA Typical Performance Over Temperature (@ +15 VDC unless otherwise noted) Key: +25°C +85°C — . — –55°C Threshold Power vs Control @ 1.0 GHz 1000 0.1 100 0.01 -15 -10 -5 0 Input Power - dBm 5 10 -5 Return Loss - dB R V Return Loss 0 1 Control Voltage - volts Control Resistance - Ohms 10000 -10 -15 -20 -25 -30 0 2 4 6 Frequency - GHz 8 10 6002 Series 3 Frequency Response - Rth = 220 Ohms -10 -11 -12 -13 0 Frequency Response - Rth = 800 Ohms 1 Threshold Power - dBm Threshold Power - dBm -9 0 -1 -2 2 4 6 8 10 0 2 4 Frequency - GHz 12 Threshold Power - dBm 6 8 10 Frequency - GHz Frequency Response - Rth = 3100 Ohms 11 10 9 8 0 2 4 6 8 10 Frequency - GHz Response Delay Top Trace: Input pulse @ 0 dBm Bottom Trace: Detector Response @ RT = 400 Ω Response Delay Top Trace: Input pulse @ 0 dBm Bottom Trace: Detector Response @ RT = 600 Ω Case Drawings 0.015±0.001 4 PL 0.050±0.015 8 PL 0.040 4 PL 0.010 TYP 4 R0.010 4 PL 0.040 1 CL 3 0.230 0.055 TYP + + 0.040 TYP 0.025 TYP 2 0.030 3 PL 0.010 0.230 PKG # 0.250 SQ 0.120 MAX 0.008±0.001 SM-25 SM-25F SM-25DA SM-25DD 1 RF IN RF IN RF IN RF IN PIN DESIGNATION 2 3 GND RF OUT V-CONT RF OUT –V VID OUT CTL TTL OUT 4 +V +V +V +V NOTES: 1. MAXIMUM TEMPERATURE EXPOSURE IS 260°C FOR 10 SECONDS. 2. DIMENSIONS IN INCHES. 3. TOLERANCES: xxx ± .01 xxx ± .005 Contact Teledyne Microwave Solutions: 650-691-9800 650-962-6845 fax Check for updates: www.teledynemicrowave.com