TELEDYNE DEFENCE LIMITED 2-18GHz Switch Multiplexer Technical Data SA002 A Teledyne Technologies Company Features Full 2 – 18 GHz Coverage 8 Equally spaced channels Low Noise Figure Flat Group Delay Applications Broadband EW Signal limiting Adaptive filtering RWR system protection Test lab filtering Product Description The Switch Multiplexer is a single RF input to single RF output, fast, multi-configurable filter bank covering 2-18GHz. Consisting of 8 equally spaced channels, each one independently controlled, allowing 256 possible combinations of overall filter response from input to output. This provides the user with a fast, flexible, filter network capable of providing different band-pass or band-stop responses on a pulse-by-pulse basis in dense signal environments. Filter control is achieved by 8 independent TTL control bits. With internal amplification, providing zero loss and low noise figure, together with flat insertion loss and exceptionally flat group delay, the filter is an ideal system enhancement. Designed to with stand harsh military environments, the SA002 is a complete front-end filter solution allowing system designers to achieve functionality previously unattainable. Global Defence & Security Solutions SA002 rev 3.0 16 November 2009 Page 1 of 4 Teledyne Defence Ltd Airedale House Royal London Industrial Estate Acorn Park, Charlestown Shipley, West Yorkshire UK, BD17 7SW Tel: +44 (0) 1274 531 602 Fax:+44 (0) 1274 595 724 Email: [email protected] Web: www.teledynedefence.co.uk © Teledyne Defence Ltd, 2009. All rights reserved. Patents pending GB0710947.3 & PCT/GB2007/002092. TELEDYNE DEFENCE LIMITED 2-18GHz Switch Multiplexer Technical Data SA002 A Teledyne Technologies Company Electrical Specification Parameter Specification Passband Passband Insertion Loss Window Insertion loss window variation with temperature Group Delay Variation Noise Figure Rejection Input 1dB Compression Channel Control Input / Output Impedance VSWR Operating Temperature Range DC power Size 2-18GHz (channeled as : 2-4-6-8-10-12-14-16-18) 0 to +4dB NOTE 1, <0.025dB/ºC NOTE 1 <3ns (in passband) NOTE 1 10 dB max (in passband) NOTE 1 50dBc min @ adjacent band centre >0 dBm NOTE 1 8 bit parallel TTL 50 Ohm, standard SMA (f) 2:1 (input) 2.5:1 (output) -40 to +85 degrees C +12V DC at < 400mA -5V DC at < 100mA 130 x 90 x 15 mm Max NOTES: 1. Passband defined as being 5% from band edge of de-selected channels. Block Diagram J1 Input SA002 rev 3.0 16 November 2009 Page 2 of 4 J2 Output TELEDYNE DEFENCE LIMITED 2-18GHz Switch Multiplexer Technical Data SA002 A Teledyne Technologies Company Performance Data Insertion Loss and Rejection The following plots show the filter in differing states, showing the true switch multiplexer nature of the SA002. Parameter Fig 1. S21, all channels ‘ON’ Fig 2. S21 ‘Odd’ channels ‘ON’ Fig 3. Overlay of individual channels Fig 4. Full band Group Delay response Fig 5 & 6. Group Delay response in ‘On’ and ‘Off’ Bands. SA002 rev 3.0 16 November 2009 Page 3 of 4 TELEDYNE DEFENCE LIMITED 2-18GHz Switch Multiplexer Technical Data SA002 A Teledyne Technologies Company Connector Information Parameter Pin Connector Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Ground +ve Supply -ve Supply Channel 1 Control Channel 2 Control Channel 3 Control Channel 4 Control Channel 5 Control Channel 6 Control Channel 7 Control Channel 8 Control N/C N/C N/C N/C J0 – DC & Control Connector Body Connector is MDM-15-S-H-003-P, a suitable mating connector is required. Outline Drawing SA002 rev 3.0 16 November 2009 Page 4 of 4