MULTIQOR™ PLATE MTQ-Px-AC115-1 MILITARY COTS CONFIGURABLE MULTI-OUTPUT SINGLE PHASE AC-DC POWER SUPPLY 1 to 2 Outputs 85 - 180 Vrms 47 - 63 Hz / 360 - 800 Hz Up to 650 W Standard Configurations Input Voltage Input Frequency Total Output Power MULTIQOR™ PLATE The MultiQor Plate format of input-filtered single phase AC-DC power supplies provides up to two customer defined output voltages that are isolated from the input, each other and the cold plate. Using SynQor’s Mil-COTS line of high efficiency, high reliability, fixed switching frequency DC-DC converters, PFC and EMI filters, this supply is designed to comply with MILSTD-704, and MIL-STD-1399. The complete assembly is designed to withstand the harsh environments of the Military and Aerospace industries and is compliant with MIL-STD-810G requirements. Single Phase AC-DC Power Supply Operational Features • • • • • • Input voltage range: 85 - 180 Vrms Universal input frequency range: 47 - 63 Hz / 360 - 800 Hz Up to 650 W output power ≥ 0.99 Power Factor (50/60 Hz) Internal inrush current limit Hold-Up Capacitors (with available external connection) Input current limit and auto-recovery short circuit protection Auto-recovery input under/over-voltage protection Auto-recovery output over-voltage protection Auto-recovery thermal shutdown Mechanical Features • • Size: 6.70” x 9.12” x 1.23” (170.2 x 231.6 x 31.3 mm) Refer to mechanical diagrams for weight Product # MTQ-Px-AC115-1 Phone 1-888-567-9596 • • • www.synqor.com PFC Enable (isolated) Individual output voltage Enable control (isolated) AC Power Good Signal (isolated) Safety Features • • Protection Features • • • • Control Features Input/Output to baseplate isolation 2150 Vdc Internal input fuses Compliance Features • • Designed to meet these standards: PENDING MIL-STD-1399 MIL-STD-704-2, -704-4, & -704-6* (see 704 app section) Contents Page No. Typical Application............................................................................2 Technical Specification.......................................................................6 Standards & Qualification Testing.......................................................7 Application Section............................................................................8 Mechanical Drawings P1..................................................................10 Mechanical Drawings P2..................................................................11 Ordering Information......................................................................12 Doc.# 005-0006708 Rev. 3 07/08/2015 Page 1 MULTIQOR™ PLATE MTQ-Px-AC115-1 Technical Specification Typical Connection of the MTQ-P1-AC115-1 F1 MOV1 PFC Out L1 L1 IN OUT SynQor MCOTS AC Line Filter GND F2 L2/N IN L1 +Vout CLK Sync TVS1 IMON SynQor MPFC MODULE OUT AC Good CHold-Up Load ENA AUX PFC ENA L2/N PFC Gnd L2/N F3 +V +Vout IN +Sense SynQor ON/ MCOTS Trim OFF DC-DC Converter -Sense -VIN -Vout -Vout CY1 PFC ENA CY2 A GND ENA 1 ENA PS1 A GND Product # MTQ-Px-AC115-1 Isolated AC Good Phone 1-888-567-9596 www.synqor.com Doc.# 005-0006708 Rev. 3 07/08/2015 Page 2 MULTIQOR™ PLATE MTQ-Px-AC115-1 Technical Specification Typical Connection of the MTQ-P2-AC115-1 F1 MOV1 PFC Out L1 L1 IN OUT SynQor MCOTS AC Line Filter GND F2 L2/N IN L1 +Vout CLK Sync TVS1 IMON SynQor MPFC MODULE OUT AC Good F3 CHold-Up L2/N +V +Vout IN +Sense SynQor ON/ MCOTS Trim OFF DC-DC Converter -Sense Load ENA AUX PFC ENA L2/N PFC Gnd -VIN -Vout -Vout CY1 PFC ENA F4 A GND +V CY2 ● ● ● +Vout IN +Sense SynQor MCOTS ON/ OFF DC-DC Converter ENA 1 Trim -Sense ENA PS1 A GND ENA 2 -VIN -Vout CY3 ENA PS2 CY4 A GND Isolated AC Good Product # MTQ-Px-AC115-1 Phone 1-888-567-9596 www.synqor.com Doc.# 005-0006708 Rev. 3 07/08/2015 Page 3 MULTIQOR™ PLATE MTQ-Px-AC115-1 Technical Specification MTQ-Px-AC115-1 Family Input Characteristics Parameter ABSOLUTE MAXIMUM RATINGS Input Voltage Continuous Non-operating 100ms Transient Isolation Voltage Operating Temperature Storage Temperature ELECTRICAL CHARACTERISTICS Operating Input Voltage Range Min. AC Input Continuous AC Input 100ms Transient Operating Input Frequency Typ. -55 -65 450 575 2150 100 125 Vpk Vpk V Input/Output to Plate °C Plate Temperature °C 85 40 47 360 180 180 63 800 Vrms Vrms See Note 1 Hz 50/60 Hz range Hz 400 Hz range Power Factor of AC Input Current 0.99 50/60 Hz range 0.97 3 Total Harmonic Distortion of AC Input Current Inrush of AC Input Current 10 10 775 9.5 Maximum Input Power Maximum Input Current Turn-On Input Voltage Threshold FEATURE CHARACTERISTICS PFC Enable Control 30 -5 2.5 PFC Off-State Voltage PFC On-State Voltage Enable Control Max. Units Notes & Conditions 0.7 40 400 Hz range, min 400 W output % At full output power Apk 50/60 Hz range Apk 400 Hz range W Arms 85 VAC in Vrms >1s Duration, See Note 1 V V Pin 2 of J1, referenced to AGND Pin can also be left open Pins 6-7 of J1, referenced to AGND Converter Off-State Voltage -5 0.7 V Converter On-State Voltage 2.5 40 V Pin can also be left open Note 1: Available output power reduced when <85 Vrms, see Figure 1 See individual DC-DC Converter and Filter Datasheets for more information regarding performance specifications, (MACF-xxx-230-HT, MPFC-115-270-HP, MCOTS-C-270-xx-FT, MCOTS-C-270-xx-HT). Product # MTQ-Px-AC115-1 Phone 1-888-567-9596 www.synqor.com Doc.# 005-0006708 Rev. 3 07/08/2015 Page 4 MULTIQOR™ PLATE MTQ-Px-AC115-1 Technical Specification 800 700 Power Output (W) 600 500 85 Vac 400 100 Vac 300 115 Vac 200 130 Vac 100 0 0 20 40 60 80 100 120 Base Plate Temperature (ºC) Figure 1: Output power vs. baseplate temperature derating curve of the MPFC-115-270-HP Product # MTQ-Px-AC115-1 Phone 1-888-567-9596 www.synqor.com Doc.# 005-0006708 Rev. 3 07/08/2015 Page 5 MULTIQOR™ PLATE MTQ-Px-AC115-1 Technical Specification Block Diagram for P1 PFC Out PFC GNd V1 + V1RTN L1 700W max V1MONITOR+ V1SNS + V1TRIM V1SNS – V1MONITOR- CHold-Up L2/N Plate Note: Maximum total output power must be limited such that the power drawn from the PFC is typically ≤700W. The efficiency of each converter should be considered in this calculation. V1 ENA Supervisory Circuit (with Isolation) PFC ENA AGND AC GOOD Product # MTQ-Px-AC115-1 Phone 1-888-567-9596 www.synqor.com Doc.# 005-0006708 Rev. 3 07/08/2015 Page 6 MULTIQOR™ PLATE MTQ-Px-AC115-1 Technical Specification Block Diagram for P2 PFC Out PFC GNd V1 + V1RTN L1 700W max V1MONITOR+ V1SNS + V1TRIM V1SNS – V1MONITOR- CHold-Up L2/N V2 + V2RTN V2MONITOR+ V2SNS + V2TRIM V2SNS – V2MONITOR- Plate Note: Maximum total output power must be limited such that the power drawn from the PFC is typically ≤700W. The efficiency of each converter should be considered in this calculation. V1 ENA Supervisory Circuit (with Isolation) V2 ENA PFC ENA AGND AC GOOD Product # MTQ-Px-AC115-1 Phone 1-888-567-9596 www.synqor.com Doc.# 005-0006708 Rev. 3 07/08/2015 Page 7 MULTIQOR™ PLATE MTQ-Px-AC115-1 Mechanical Drawings P1 1.50 [38.1] J1 0.51 [12.9] 0.64 [16.2] 6.70 0.16 [3.9] J1 6.390 [170.2] [162.31] 1.14 [29.0] J2 J2 4.000 [101.60] 9.12 [231.6] 4.000 [101.60] 0.177 [4.50] x6 0.75 [19.1] 5.12 [130.0] 2.13 [54.1] 1.23 [31.3] J3 0.332 [8.43] Pin 1 2 3 0.24 [6.0] 1.330 [33.78] 2.430 [61.72] 1.330 [33.78] OUTPUT POWER TERMINAL x6 M4 THREADED POST Hold-Up Connector (J2) Name Function PFC OUT Positive Output of PFC NC Not Connected PFC GND Negative Output of PFC Pin Name 1 MONITOR+ 2 NC 3 MONITOR— 4 VSENSE+ 5 TRIM 6 VSENSE— Product # MTQ-Px-AC115-1 Output Connector (J3) Function Monitor of Vout+ Not Connected Monitor of Vout– Sense Positive Trim Pin Sense Negative Phone 1-888-567-9596 www.synqor.com Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Input Connector (J1) Name Function AGND Analog Ground PFC ENA PFC Enable [Ref to AGND] AUX IN Aux Power In [Ref to AGND] AC GOOD Ref to AGND NC Not Connected ENA_1 Enable 1 [Ref to AGND] NC Not Connected NC Not Connected NC Not Connected NC Not Connected NC Not Connected NC Not Connected NC Not Connected COM IN Chassis L2/N AC Line 2 / Neutral L1 AC Line 1 Doc.# 005-0006708 Rev. 3 07/08/2015 Page 11 MULTIQOR™ PLATE MTQ-Px-AC115-1 Mechanical Drawings P2 1.50 [38.1] J1 0.51 [12.9] 0.64 [16.2] 6.70 0.16 [3.9] J1 6.390 [170.2] [162.31] 1.14 [29.0] J2 J2 4.000 [101.60] 9.12 [231.6] 4.000 [101.60] 0.177 [4.50] x6 0.75 [19.1] 5.12 [130.0] 2.13 [54.1] 1.23 [31.3] J3 0.332 [8.43] Pin 1 2 3 0.24 [6.0] 1.330 [33.78] 2.430 [61.72] J4 1.330 [33.78] OUTPUT POWER TERMINAL x6 M4 THREADED POST Hold-Up Connector (J2) Name Function PFC OUT Positive Output of PFC NC Not Connected PFC GND Negative Output of PFC Output Connector (J3, J4) Pin Name Function 1 MONITOR+ Monitor of Vout+ 2 NC Not Connected 3 MONITOR— Monitor of Vout– 4 VSENSE+ Sense Positive 5 TRIM Trim Pin 6 VSENSE— Sense Negative Product # MTQ-Px-AC115-1 Phone 1-888-567-9596 www.synqor.com Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Input Connector (J1) Name Function AGND Analog Ground PFC ENA PFC Enable [Ref to AGND] AUX IN Aux Power In [Ref to AGND] AC GOOD Ref to AGND NC Not Connected ENA_1 Enable 1 [Ref to AGND] ENA_2 Enable 2 [Ref to AGND] NC Not Connected NC Not Connected NC Not Connected NC Not Connected NC Not Connected NC Not Connected COM IN Chassis L2/N AC Line 2 / Neutral L1 AC Line 1 Doc.# 005-0006708 Rev. 3 07/08/2015 Page 12 MULTIQOR™ PLATE MTQ-Px-AC115-1 Ordering Information MTQ Family MTQ - P1 - AC115: - 1 - XXXXXXX - S V Plate Format (# of Outputs) - MIL-STD Compliance - Phase - 6 Digit Application Identification Number - Screening Optional Character P1: 1 output P2: 2 output PENDING AC115: MIL-STD-704 (A-F) MIL-STD-1399 1: Single Phase 6 Digit Application Identification Number S: S-Grade M: M-Grade V: Cover Not all combinations make valid part numbers, please contact SynQor to order a configured solution. Example: MTQ-P1-AC115-1-XXXXXX-SV PART NUMBERING SYSTEM The part numbering system for SynQor’s ac-dc converters follows the format shown in the example. APPLICATION NOTES A variety of application notes and technical white papers can be downloaded in pdf format from our website. PATENTS SynQor holds numerous U.S. patents, one or more of which apply to most of its power converter products. Any that apply to the product(s) listed in this document are identified by markings on the product(s) or on internal components of the product(s) in accordance with U.S. patent laws. 5,999,417 6,222,742 6,545,890 6,594,159 6,731,520 6,894,468 6,896,526 6,927,987 7,050,309 7,072,190 7,085,146 7,119,524 7,269,034 7,272,021 7,272,023 7,558,083 7,564,702 7,765,687 7,787,261 8,023,290 8,149,597 8,493,751 8,644,027 Contact SynQor for further information and to order: Phone:��������������������������������������������� 978-849-0600 Toll Free:����������������������������������������� 888-567-9596 Fax:��������������������������������������������������� 978-849-0602 E-mail:���������������������������������������������� [email protected] Web:������������������������������������������������� www.synqor.com Address:������������������������������������������ 155 Swanson Road ����������������������������������������������������������� Boxborough, MA 01719 USA Product # MTQ-Px-AC115-1 Phone 1-888-567-9596 www.synqor.com WARRANTY SynQor offers a two (2) year limited warranty. Complete warranty information is listed on our website or is available upon request from SynQor. Doc.# 005-0006708 Rev. 3 07/08/2015 Page 13