MB08M 1000V 0.8 Amp Miniature SMD Glass Passivated Bridge Rectifiers Elektronische Bauelemente RoHS compliant product A suffix of “-C” specifies halogen & lead-free FEATURES Halogen-free type Glass passivated chip junctions Compliance to RoHS product Leadless chip form, no lead damage Low power loss, High efficiency High current capability Plastic package has Underwriters Laboratory Flammability Classification 94V-0 MBCN APPLICATION AC/DC Power Supply Communication Equipment Lighting REF. A B C MECHANICAL DATA Millimeter Min. Max. 3.40 3.60 3.70 3.90 2.44 2.64 REF. D E F Millimeter Min. Max. 2.00 2.35 0.60 0.80 0.95 1.35 Case : Packed with FRP substrate and epoxy underfilled Terminals : Pure Tin plated (Lead-Free), solderable per MIL-STD-750, Method 2026 MARKING M PACKAGE INFORMATION Package MPQ Leader Size MBCN 5K 13 inch ABSOLUTE MAXIMUM RATINGS ( TA=25℃unless otherwise specified) Parameters Repetitive peak reverse voltage on glass-epoxy P.C.B. Average Forward Current Symbol Rating Unit VRRM 1000 V 1 0.5 2 IF(AV) Peak forward surge current, 8.3ms single half sine-wave IFSM 30 A TJ, TSTG -55 ~ 150 ℃ on aluminum substrate Operating and Storage temperature range A 0.8 ELECTRICAL CHARACTERISTICS (at TA=25℃unless otherwise specified) Parameters Forward Voltage at IF = 0.4A Repetitive peak reverse current@ VR = Max. VRRM TA=25°C Current squared time t < 8.3ms Thermal Resistance Junction to Lead Note: 1. 2. 3. 1 Min. Typ. Max. Unit VF - 0.9 1 V - 0.08 5 - - 100 It 2 - 3.74 - RθJA - 130 - RθJL - 40 - IRRM TA=125°C Thermal Resistance Junction to Ambient Symbol 1 uA 2 As ℃/W On glass epoxy P.C.B. mounted on 0.05" x 0.05" (1.3 x 1.3 mm) solder pads. On aluminum substrate P.C.B. with an area of 0.8 x 0.8" (20 x 20 mm) mounted on 0.05" x 0.05" (1.3 x 13. mm) solder pads. Preliminary specification. http://www.SeCoSGmbH.com/ 27-Sep-2013 Rev. A Any changes of specification will not be informed individually. Page 1 of 2 MB08M Elektronische Bauelemente 1000V 0.8 Amp Miniature SMD Glass Passivated Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 27-Sep-2013 Rev. A Any changes of specification will not be informed individually. Page 2 of 2