SM1020D~SM10100D Voltage 20V ~ 100 V 10Amp Schottky Barrier Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free TO-263(D2-PACK) FEATURES Low forward voltage drop High current capability High reliability High surge current capability Epitaxial construction MECHANICAL DATA Case: Molded plastic Epoxy: UL94V-0 rate flame retardant Metallurgically bonded construction Mounting position: Any Weight: 1.6 grams PACKAGE INFORMATION Package MPQ Leader Size 0.8K 13’ inch 2 TO-263(D -PACK) REF. A b L4 C L3 L1 E Millimeter Min. Max. 4.00 4.85 0.51 1.00 0.00 0.30 0.36 0.74 1.50 REF 1.78 2.79 9.60 10.67 REF. c2 b2 D e L L2 Millimeter Min. Max. 1.10 1.65 1.34 REF 8.0 9.65 2.54 REF 14.6 15.88 1.27 REF MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%) Parameter Part Number Symbol SM1020D SM1040D Unit SM1060D SM10100D Maximum Repetitive Peak Reverse Voltage VRRM 20 40 60 100 V Maximum RMS Voltage VRMS 20 40 60 100 V Maximum DC Blocking Voltage VDC 20 40 60 100 V Maximum Average Forward Rectified Current Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage @ 5A Per Leg Maximum Reverse Current at Rated VR Per Diode 3 TJ=25°C TJ=100°C IF 10 A IFSM 125 A VF IR 0.55 0.65 0.83 0.3 0.2 0.1 45 22.5 10 460 280 V mA Typical Junction Capacitance 1 CJ Typical Thermal Resistance 2 RθJC 6 °C / W TJ ,TSTG -50~150 °C Operating & Storage Temperature 700 pF Notes: 1. Measured at 1MHz and applied reverse voltage of 4.0V D.C. 2. Thermal Resistance Junction to Case. FR4 Board Heat sink size: 10*10*0.2mm. 3. Pulse test: Pulse Width≦300μs, Duty Cycle≦2.0%. http://www.SeCoSGmbH.com/ 27-Dec-2013 Rev.C Any changes of specification will not be informed individually. Page 1 of 2 SM1020D~SM10100D Elektronische Bauelemente Voltage 20V ~ 100 V 10Amp Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 27-Dec-2013 Rev.C Any changes of specification will not be informed individually. Page 2 of 2