UM330 Quad, Wide-Bandwidth SPDT Video Analog Switch UM330 TSSOP16 General Description The UM330 is a quad, bi-directional, single-pole/double-throw (SPDT) video analog switch operates from a single +5V supply. The device is recommended for both RGB and composite video switching applications. The video switch can be driven from a current output RAMDAC or voltage output composite video source. The UM330 features quad 6Ω RON (TYP) SPDT switches with 500MHz bandwidth and low crosstalk. The switch offers a high-performance, low-cost solution to switch between video sources. The switch is available in Pb-free TSSOP16 package. Applications Features Personal Video Recorders Terrestrial Set-Top Boxes Hard Disk Recorders DVD Players Game Consoles Digital VCRs Desktop Video Editors Audio and Video Switching Pin Configurations Wide Bandwidth: 500MHz(TYP) Low On-Resistance: 6Ω (TYP) Single-Supply Operation: 5V Fast Switching Time Rail-to-Rail Operation Typical Power Consumption(5µW) TTL/CMOS Compatible Low Crosstalk: -60dB (10MHz) Hot Insertion Capable(It will need extra protection in power path) Micro Size Package: TSSOP16 Top View XX: Week Code UM330 TSSOP16 ________________________________________________________________________ http://www.union-ic.com Rev04 Dec.2014 1/8 UM330 Pin Description Name NC0,NC1,NC2,NC3,NO0,NO1,NO2,NO3 S EN COM0,COM1,COM2,COM3 GND V+ Function Analog video I/O Select input Switch-enable input Analog video I/O Ground Power supply Block Diagram NC0 COM0 NO0 NC1 COM1 NO1 NC2 COM2 NO2 NC3 COM3 NO3 Control Logic S EN Function Table ______ EN H L L S X L H COM0 Hi-Z NC0 NO0 COM1 Hi-Z NC1 NO1 COM2 Hi-Z NC2 NO2 COM3 Hi-Z NC3 NO3 Function Disable S=0 S=1 Ordering Information Part Number Packaging Type Marking Code UM330 TSSOP16 UM330EEUE Shipping Qty 3000pcs/13 Inch Tape & Reel ________________________________________________________________________ http://www.union-ic.com Rev04 Dec.2014 2/8 UM330 Absolute Maximum Ratings Symbol V+ VS IN Io TO TJ TSTG TL ESD Parameter Limit - 0.3 to + 6.0 - 0.3 to + 6.0 - 0.3 to + 6.0 ±200 - 40 to +85 +150 - 65 to +150 +300 4000 Supply Voltage DC Output Voltage DC Input Voltage Continuous Current Operating Temperature Range Junction Temperature Storage Temperature Range Junction Lead Temperature (Soldering, 10seconds) ESD Method 3015.7 Unit V mA °C V DC Electrical Characteristics (Over the Operating Range, V+=+5V±10%, TA=-40℃ to +85℃.) Symbol Parameter VANALOG Analog Signal Range RON ICC ICCT △ ICC IIH IIL IO IOS VIH VIL VIK VH On Resistance Quiescent Power Supply Current Transience Power Supply Current Supply Current per Input @ TTL HIGH Input High Current Input Low Current Analog Output Leakage Current Short Circuit Current Input High Voltage Input Low Voltage Clamp Diode Voltage Input Hysteresis at Control Pins Test Conditions Limits (–40 to 85 °C) Min Typ 0 Max Unit 2.0 V 6 9 Ω 7 10 Ω V+ =5.5V, VIN= GND or 5V 0.1 1 μA V+ =4.3V, VIN=1.8V 11 20 μA V+ =5.5V, VIN= 3.4V 15 μA V+ =5.5V, VIN= V+ ±1 μA V+ =5.5V, VIN= GND ±1 μA 0≤NO,NC or COM≤V+, Switch OFF ±1 μA V+=4.5V,VI=1.0V, RL=75Ω, ION=13mA V+=4.5V,VI=2.0V, RL=75Ω, ION=26mA 230 mA 2 V -0.5 V+ =4.5V, IIN= -18mA -0.7 0.8 V -0.9 V 200 mV ________________________________________________________________________ http://www.union-ic.com Rev04 Dec.2014 3/8 UM330 AC Electrical Characteristics Symbol Parameter Test Conditions tON Turn On Time tOFF Limits (–40 to 85 °C) Min Unit Typ Max RL=75Ω,CL=20pF 14 17 ns Turn Off Time RL=75Ω,CL=20pF 4 7 ns VISO Off Isolation -50 dB VCT Crosstalk RL=150Ω, f = 10MHz RIN=10Ω, RL=150Ω, f = 10MHz -60 dB BW -3dB Bandwidth RL=150Ω 500 MHz DG Differential Gain RL=150Ω, f = 3.58MHz 0.51 % DP Differential Phase RL=150Ω, f = 3.58MHz 0.01 o ICCD Supply Current per Input per MHz V+=5.5V, NO,NC and COM Pins Open, EN=GND, Control Input Toggling 50% Duty Cycle 0.25 mA/MHz VIN= 0V, f=1MHz 5 pF VIN= 0V, f=1MHz 5 pF VIN= 0V, f=1MHz 10 pF Capacitance Input/Enable Capacitance Switch Off Capacitance Switch On Capacitance CIN COFF CON Switching Time Test vcc COM VOUT NO/NC S 75Ω GND 20pF Digital Input 50% 50% 90% 90% Analog Onput EN ton toff ________________________________________________________________________ http://www.union-ic.com Rev04 Dec.2014 4/8 UM330 Typical Operating Characteristics Bandwidth vs. Frequency Off-Isolation vs. Frequency ________________________________________________________________________ http://www.union-ic.com Rev04 Dec.2014 5/8 UM330 Crosstalk vs. Frequency ________________________________________________________________________ http://www.union-ic.com Rev04 Dec.2014 6/8 UM330 Package Information UM330 TSSOP16 Outline Drawing DIMENSIONS MILLIMETERS INCHES Symbol Min Max Min Max A 1.20 0.047 A1 0.05 0.15 0.002 0.006 A2 0.90 1.05 0.035 0.041 A3 0.34 0.54 0.013 0.021 D 4.86 5.06 0.191 0.199 E 6.20 6.60 0.244 0.260 E1 4.30 4.50 0.169 0.177 b 0.20 0.28 0.008 0.011 e 0.65BSC 0.026BSC 7.0 1.5 Land Pattern 0.65 0.3 NOTES: 1. Compound dimension: 4.96×4.40. 2. Unit: mm. 3. General tolerance ±0.05mm unless otherwise specified. 4. The layout is just for reference. Tape and Reel Orientation UM330EEUE XX ________________________________________________________________________ http://www.union-ic.com Rev04 Dec.2014 7/8 UM330 IMPORTANT NOTICE The information in this document has been carefully reviewed and is believed to be accurate. Nonetheless, this document is subject to change without notice. Union assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the contained information, or to notify a person or organization of any update. Union reserves the right to make changes, at any time, in order to improve reliability, function or design and to attempt to supply the best product possible. Union Semiconductor, Inc Add: Unit 606, No.570 Shengxia Road, Shanghai 201210 Tel: 021-51093966 Fax: 021-51026018 Website: www.union-ic.com ________________________________________________________________________ http://www.union-ic.com Rev04 Dec.2014 8/8