UM3157 Low-Voltage SPDT Analog Switch UM3157 SC70-6/SC88/SOT363 General Description The UM3157 is an advanced CMOS analog switch fabricated with silicon gate CMOS technology. It achieves very low propagation delay and RDS(ON) resistances while maintaining CMOS low power dissipation. These make it ideal for portable and battery power applications. The switch conducts signals within power rails equally well in both directions when on, and blocks up to the power supply level when off. Break-before-make is guaranteed. The select pin has over-voltage protection that allows voltages above VCC, up to 6.5V to be present on the pin without damage or disruption of operation of the part, regardless of the operating voltage. The UM3157 can maintain low power consumption for rail-to-rail signaling as long as the control signal input is held at a level that is greater than VIH minimum and less than VIL maximum by improving the control circuitry input buffer. so the part can be used in mixed voltage rail environments, especially services the mobile handset applications very well allowing for the direct interface with baseband processor general purpose I/Os, and it is no longer necessary to have the control input equal to VCC to maintain low power consumption Applications Features Pin Configurations Control Inputs are 5V Tolerant Low Charge Injection Excellent ON-State Resistance Matching Low Total Harmonic Distortion (THD) 1.65V to 5.5V Single-Supply Operation ESD Performance: Human Body Model>2kV Machine Model>200V SC70-6/SC88/SOT363 Package Pb-Free Package Top View 6 5 B7A 1 2 4 M Sample-and-Hold Circuits Battery-Powered Equipment Audio and Video Signal Routing Communication Circuits 3 M: Month Code UM3157 SC70-6/SC88/SOT363 ________________________________________________________________________ http://www.union-ic.com Rev.04 Dec.2014 1/8 UM3157 Ordering Information Part Number Packaging Type Marking Code UM3157 SC70-6/SC88/SOT363 B7A Shipping Qty 3000pcs/7 Inch Tape & Reel Function Table Select Input L H Function B0 Connected to A B1 Connected to A Absolute Maximum Ratings Symbol Parameter Limit VCC Supply Voltage - 0.5 to + 6.5 VS DC Switch Voltage (Note 1) - 0.5 to (VCC + 0.5) VIN DC IN Voltage (Note 1) - 0.5 to + 6.5 IIK -50 DC Input Diode Current@ VIN<0V IOUT DC Output Current 128 ICC/ IGND DC VCC or Ground Current +100 TJ Junction Temperature Under Bias +150 TSTG Storage Temperature - 65 to +150 TL Junction Lead Temperature (Soldering, 10seconds) 260 θJA Thermal Resistance 350 PD Power Dissipation @ +85°C 180 Note 1: The input and output negative voltage ratings may be exceeded if the input and diode current ratings are observed. Unit V mA °C °C/W mW output Recommended Ratings (Note2) Symbol VCC VIN VIN VOUT TA Parameter Supply Voltage Operating Switch Input Voltage Select Input Voltage Output Voltage Operating Temperature Input Rise and Fall Time tr, tf Control Input Vcc=2.3V to 3.6V Control Input Vcc=4.5V to 5.5V Note 2: Select input must be held HIGH or LOW, it must not float. Limit 1.65 to 5.5 0 to VCC 0 to VCC 0 to VCC -55 to +125 Unit 0 to 10 0 to 5.0 ns/V V °C ________________________________________________________________________ http://www.union-ic.com Rev.04 Dec.2014 2/8 UM3157 Electrical Characteristics Limits (–40 to 85 °C) Symbol Parameter Test Conditions Vcc(V) Temp Unit Min Typ Max DC Electrical Characteristics Analog Signal Range Vcc IIN Input Leakage Current 0≤VIN≤5.5V IOFF OFF State Leakage Current 0≤A, B≤Vcc VIH Input High Voltage 0 to 5.5 1.65 to 5.5 Full 0 Room Full Room Full ±0.05 ±0.05 1.65 to 2.3 1.1 2.3 to 2.7 1.4 2.7 to 3.6 Full 3.6 to 4.3 2.1 4.3 to 5.5 2.6 2.7 to 3.6 ICC RON RRANGE ΔRON RFLAT On-Resistance (Note3) On Resistance Over Signal Range (Note3,7) On Resistance Match Between Channels (Note3,4,5) On Resistance Flatness (Note3,4,6) μA 0.7 Full 1.0 V 1.3 4.3 to 5.5 VIN =Vcc or GND IO=0 VIN = 0V, IO=30mA VIN = 2.4V, IO=-30mA VIN = 4.5V, IO=-30mA VIN = 0V, IO=24mA VIN = 3V, IO=-24mA VIN = 0V, IO=8mA VIN = 2.3V, IO=-8mA VIN = 0V, IO=4mA VIN = 1.65V, IO=-4mA IA=-30mA 0≤VBn≤Vcc IA=-24mA 0≤VBn≤Vcc μA 0.4 3.6 to 4.3 Quiescent Supply Current ±0.1 ±1 ±0.1 ±1 V 2.3 to 2.7 Input Low Voltage V 1.8 1.65 to 2.3 VIL Vcc 1.5 1.0 10 7.0 12 15 9.0 20 12 30 20 50 5.5 Room Full 4.5 Full 3.0 Full 2.3 Full 1.65 Full 4.5 Full 25 3.0 Full 50 IA=-8mA, 0≤VBn≤Vcc 2.3 Full 100 IA=-4mA, 0≤VBn≤Vcc 1.65 Full 300 IA=-30mA, VBn = 3.15V 4.5 Room 0.15 IA=-24mA, VBn = 2.1V 3.0 Room 0.2 IA=-8mA, VBn = 1.6V 2.3 Room 0.5 IA=-4mA, VBn = 1.15V 1.65 Room 0.5 5.0 Room 6.0 3.3 Room 12 IA=-8mA, 0≤VBn≤Vcc 2.5 Room 28 IA=-4mA, 0≤VBn≤Vcc 1.8 Room 125 3.0 5.0 7.0 4.0 10 5.0 13 6.5 17 μA Ω Ω Ω IA=-30mA 0≤VBn≤Vcc IA=-24mA 0≤VBn≤Vcc Ω ________________________________________________________________________ http://www.union-ic.com Rev.04 Dec.2014 3/8 UM3157 Electrical Characteristics (Continued) Limits (–40 to 85 °C) Symbol Parameter Test Conditions Vcc(V) Temp Unit Min Typ Max AC Electrical Characteristics tPHL tPLH Propagation Delay Bus to Bus (Note 9) VI = OPEN tPZL tPZH Output Enable Time Turn On Time (A to Bn) VI = 2×VCC for tPZL VI = 0 V for tPZH tPLZ tPHZ Output Disable Time Turn Off Time (A Port to B Port) VI = 2×VCC for tPLZ VI = 0 V for tPHZ tD Break Before Make Time (Note 8) QINJ Charge Injection (Note 8) CL = 0.1 nF, VGEN = 0 V RGEN = 0Ω 1.65 to1.95 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 1.65 to1.95 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 1.65 to1.95 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 1.65 to1.95 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 5.0 3.3 OIRR Off Isolation (Note 10) RL=50Ω, f = 10 MHz Xtalk Crosstalk BW THD 1.2 0.8 0.3 Full Full Full Full 7.0 3.5 2.5 1.7 3.0 2.0 1.5 0.8 0.5 0.5 0.5 0.5 24 14 7.6 5.7 13 7.5 5.3 3.8 ns ns ns ns Room 7.0 3.0 pC 1.65 to 5.5 Room -57 dB RL=50Ω, f = 10 MHz 1.65 to 5.5 Room -54 dB -3 dB Bandwidth RL=50Ω 1.65 to 5.5 Room 250 MHz Total Harmonic Distortion (Note8) RL=600Ω 0.5VP-P f=600Hz to 20kHz 5.0 Room 0.011 % VCC = 0V 2.3 pF VCC =5.0V 6.5 pF VCC =5.0V 18.5 pF Capacitance CIN CIO-B CIOA-ON IN Pin Input Capacitance (Note11) B Port Off Capacitance (Note11) A Port Capacitance when Switch is Enabled (Note11) Note 3: Measured by the voltage drop between A and B pins at the indicated current through the switch. On Resistance is determined by the lower of the voltages on the two (A or B Ports). Note 4: Parameter is characterized but not tested in production. Note 5: ΔRON =︱RON (B0) − RON(B1) ︱measured at identical VCC, temperature and voltage levels. Note 6: Flatness is defined as the difference between the maximum and minimum value of On Resistance over the specified range of conditions. Note 7: Guaranteed by design. Note 8: Guaranteed by design. Note 9: This parameter is guaranteed by design but not tested. The bus switch contributes no propagation delay other than the RC delay of the On Resistance of the switch and the 50 pF load capacitance, when driven by an ideal voltage source (zero output impedance). Note 10: Off Isolation = 20 log10 [VA/VBn]. Note 11: TA = +25, f = 1 MHz, Capacitance is characterized but not tested in production. ________________________________________________________________________ http://www.union-ic.com Rev.04 Dec.2014 4/8 UM3157 Test Circuits/Timing Diagrams ________________________________________________________________________ http://www.union-ic.com Rev.04 Dec.2014 5/8 UM3157 ________________________________________________________________________ http://www.union-ic.com Rev.04 Dec.2014 6/8 UM3157 Package Information UM3157 SC70-6/SC88/SOT363 Outline Drawing D θ e1 Symbol L e 5 4 1 2 3 L1 E E1 6 20 c b A End View A1 A2 Top View Side View A A1 A2 b c D E E1 e e1 L L1 θ DIMENSIONS MILLIMETERS Min Max 0.900 1.100 0.000 0.100 0.900 1.000 0.150 0.350 0.080 0.150 2.000 2.200 1.150 1.350 2.150 2.450 0.650REF 1.200 1.400 0.525REF 0.260 0.460 0° 8° INCHES Min Max 0.035 0.043 0.000 0.004 0.035 0.039 0.006 0.014 0.003 0.006 0.079 0.087 0.045 0.053 0.085 0.096 0.026REF 0.047 0.055 0.021REF 0.010 0.018 0° 8° Land Pattern 1.94 1.30 0.80 NOTES: 1. Compound dimension: 2.10×1.25; 2. Unit: mm; 3.General tolerance ±0.05mm unless otherwise specified; 4. The layout is just for reference. 0.35 B7A M Tape and Reel Orientation ________________________________________________________________________ http://www.union-ic.com Rev.04 Dec.2014 7/8 UM3157 IMPORTANT NOTICE The information in this document has been carefully reviewed and is believed to be accurate. Nonetheless, this document is subject to change without notice. Union assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the contained information, or to notify a person or organization of any update. Union reserves the right to make changes, at any time, in order to improve reliability, function or design and to attempt to supply the best product possible. Union Semiconductor, Inc Add: Unit 606, No.570 Shengxia Road, Shanghai 201210 Tel: 021-51093966 Fax: 021-51026018 Website: www.union-ic.com ________________________________________________________________________ http://www.union-ic.com Rev.04 Dec.2014 8/8