UM2268/UM2268A 0.4Ω Ultra Low ON-Resistance, Dual, SPDT Analog Switch UM2268 QFN10 1.8×1.4 UM2268A QFN10 2.1×1.6 General Description The UM2268/UM2268A is a dual, low-power single-pole/ double-throw (SPDT) analog switch that operates from a single +1.8V to +4.4V supply. The UM2268/UM2268A features guaranteed on-resistance matching (0.04Ω TYP) between switches and guaranteed on resistance flatness over the signal range (0.08Ω TYP), as well as high off-isolation and low crosstalk. This ensures excellent linearity and low distortion when switching audio signals. The UM2268 is available in Pb-free QFN10 package (1.8mm×1.4mm×0.55mm), while the UM2268A is available in Pb-free QFN10 package (2.1mm×1.6mm×0.55mm). Applications Features Portable Instrumentation Battery-Operated Equipment Computer Peripherals Speaker and Earphone Switching Medical Equipment Audio and Video Switching Pin Configurations VCC Operating Range: +1.8V to +4.4V Low On-Resistance: 0.4Ω(TYP) at +4.4V On-Resistance Matching: (0.04Ω TYP) On-Resistance Flatness: (0.08Ω TYP) -3dB Bandwidth: 80MHz Low Off-Isolation: -78dB (100kHz) Low Crosstalk: -93dB (100kHz) TTL/CMOS Compatible Break-Before-Make Switching Rail-to-Rail Input and Output Operation Lead (Pb)-Free QFN10 Package Top View (Top View) NC2 NO1 2 1 NO2 3 10 NC1 GND 4 9 V+ COM2 5 8 COM1 6 7 IN2 IN1 M: Month Code UM2268 QFN10 1.8×1.4 (Top View) 4 GND 3 2 5 1 10 6 7 COM2 IN2 8 9 AL M NO2 NC2 NO1 NC1 VCC M: Month Code UM2268A QFN10 2.1×1.6 IN1 COM1 ________________________________________________________________________ http://www.union-ic.com Rev.09 Dec.2014 1/11 UM2268/UM2268A Ordering Information Part Number Packaging Type Marking Code Shipping Qty UM2268 QFN10 1.8mm×1.4mm AE UM2268A QFN10 2.1mm×1.6mm AL 3000pcs/7 Inch Tape & Reel Pin Description UM2268 UM2268A Name Function 1,3 2,4 NO1,NO2 Normally-open terminal 10,2 1,3 NC1,NC2 Normally-closed terminal 4 5 GND Ground 8,5 9,6 COM1,COM2 Common terminal 7,6 8,7 IN1,IN2 Digital control pin to connect the COM terminal to the NO or NC terminals 9 10 V+ Power Supply Function Table LOGIC 0 1 NO OFF ON NC ON OFF Absolute Maximum Ratings Symbol V+ VIS VIN ID IP TO TSTG ESD Parameter Supply Voltage Analog Switch Input Voltage Digital Select Input Voltage Continuous DC Current Peak Current Operating Temperature Range Storage Temperature Range HBM Limit 0 to + 4.6 -0.3 to (VCC + 0.3) 0 to + 4.6 250 350 - 40 to +85 - 65 to +150 4000 Unit V mA mA °C V ________________________________________________________________________ http://www.union-ic.com Rev.09 Dec.2014 2/11 UM2268/UM2268A Electrical Characteristics V+ = +4.4V, GND = 0V, TA = -40°C to + 85°C. Unless otherwise noted. Symbol V+ ICC IIN IOFF Parameter Power Supply Range Quiescent Supply Current Input Leakage Current Power Off Leakage Current ION Channel ON Leakage Current RON On-Resistance (Note2) ΔRON RFLAT On Resistance Match Between Channels (Note2,3,4) On Resistance Flatness (Note2,3,5) Test Conditions Vcc (V) Limits (–40 to 85 °C) Temp Min Full Typ (Note1) 1.8 Unit Max 4.4 V VIN =V+ or 0 4.4 Full 1.0 μA VIN=0V/4.4V 4.4 Full 1.0 μA 4.4 Full 1.0 μA 4.4 Full 1.0 μA VNO,VNC or VCOM=1.0V, ICOM=-100mA 4.4 Room Full 0.4 0.75 0.85 Ω VNO,VNC or VCOM=1.0V, ICOM=-100mA 4.4 Room Full 0.04 0.15 0.20 Ω VNO,VNC or VCOM=1.0V,2.5V ICOM=-100mA 4.4 Room Full 0.08 0.12 0.20 Ω VNO/VNC=3.3V/0.3V, VCOM=0.3V/3.3V VCOM=0.3V/3.3V VNO or VNC=0.3V/3.3V, or floating VIH Input High Voltage 4.4 Full VIL Input Low Voltage 4.4 Full 4.4 Room 88 ns 4.4 Room 16 ns 4.4 Room 6 ns Room -78 dB Room -58 dB Room -93 dB Room -90 dB Room 80 MHz VIN =2.1V to 0V, RL=50Ω,CL=35pF, VNO1,or VNC1= VNO2,or VNC2=2.1V,Test Circuit1 VIN =2.1V to 0V, RL=50Ω,CL=35pF, VNO1,or VNC1= VNO2,or VNC2=2.1V,Test Circuit1 VIN =2.1V to 0V, RL=50Ω,CL=35pF, VNO1,or VNC1= VNO2,or VNC2=2.1V,Test Circuit2 tON Turn On Time tOFF Turn Off Time tBBM Break Before Make Time (Note 6) Off Isolation (Note 7) VBIAS=2.1V, Signal=0dBm, Test Circuit3 100kHz OIRR VBIAS=2.1V, Signal =0dBm, Test Circuit4 100kHz Crosstalk XTALK BW -3dB Bandwidth 2.0 V 0.5 V 4.4 1MHz 4.4 1MHz VBIAS=2.1V, Signal = 0dBm, Test Circuit5 4.4 Charge Injection VG=0V,RS=0Ω, Select Input to 4.4 Room 4.0 pC CL=1.0nF,Test Circuit6 Common I/O HSD+ HSD- ON CON Capacitance 4.4 Room 56 pF (Note8) Note 1: Typically values are at V+=4.4V and TA=+25℃. Note 2: Guaranteed by design. Resistance measurements do not include test circuit or package resistance. Note 3: Parameter is characterized but not tested in production. Note 4: ΔRON =︱RON (NO1/NC1) – RON(NO2/NC2)︱measured at identical VCC, temperature and voltage levels. Note 5: Flatness is defined as the difference between the maximum and minimum value of On Resistance over the specified range of conditions. Note 6: Guaranteed by design. Note 7: Off Isolation = 20 log10 [VCOM/VNO/NC]. Note 8: TA = +25, f = 1 MHz, Capacitance is characterized but not tested in production. Q ________________________________________________________________________ http://www.union-ic.com Rev.09 Dec.2014 3/11 UM2268/UM2268A Electrical Characteristics V+ = +2.7V to +3.6V, TA = -40°C to + 85°C. Unless otherwise noted. Symbol VNO,VNC, VCOM IIN IOFF Parameter Analog Signal Range Input Leakage Current Power Off Leakage Current ION Channel ON Leakage Current RON On-Resistance (Note2) ΔRON RFLAT On Resistance Match Between Channels (Note2,3,4) On Resistance Flatness (Note2,3,5) Vcc (V) Test Conditions Limits (–40 to 85 °C) Temp Min Full Typ (Note1) 0 Unit Max V+ V 2.7 Full 1.0 μA 3.6 Full 1.0 μA 3.6 Full 1.0 μA VNO,VNC or VCOM=1.0V, ICOM=-100mA 2.7 Room Full 0.75 1.10 1.20 Ω VNO,VNC or VCOM=1.0V, ICOM=-100mA 2.7 Room Full 0.03 0.15 0.20 Ω VNO,VNC or VCOM=1.0V,2.5V ICOM=-100mA 2.7 Room Full 0.10 0.18 0.20 Ω VIN=0V/2.7V VNO/VNC=3.3V/0.3V, VCOM=0.3V/3.3V VCOM=0.3V/3.3V VNO or VNC=0.3V/3.3V, floating or VIH Input High Voltage 3.0 Full VIL Input Low Voltage 3.0 Full tON Turn On Time 3.0 Room 100 ns tOFF Turn Off Time 3.0 Room 20 ns tBBM Break Before Make Time (Note 6) 3.0 Room 9.2 ns Off Isolation (Note 7) VBIAS=2.1V, Signal = 0dBm, Test Circuit3 100kHz Room -78 dB OIRR Room -58 dB VBIAS=2.1V, Signal = 0dBm, Test Circuit4 100kHz Room -93 dB Crosstalk Room -90 dB Room 80 MHz XTALK BW -3dB Bandwidth VIN =1.5V to 0V, RL=50Ω,CL=35pF, VNO1,or VNC1= VNO2,or VNC2=1.5V,Test Circuit1 VIN =1.5V to 0V, RL=50Ω,CL=35pF, VNO1,or VNC1= VNO2,or VNC2=1.5V,Test Circuit1 VIN =1.5V to 0V, RL=50Ω,CL=35pF, VNO1,or VNC1= VNO2,or VNC2=1.5V,Test Circuit2 1.5 V 0.4 V 3.0 1MHz 3.0 1MHz VBIAS=2.1V, Signal=0dBm, Test Circuit5 VG=0V,RS=0Ω, CL=1.0nF, Test Circuit6 3.0 Charge Injection Select Input to 3.0 Room 3.0 pC Common I/O HSD+ HSD- ON CON Capacitance 3.0 Room 56 pF (Note8) Note 1: TA=+25℃. Note 2: Guaranteed by design. Resistance measurements do not include test circuit or package resistance. Note 3: Parameter is characterized but not tested in production. Note 4: ΔRON =︱RON (NO1/NC1) – RON(NO2/NC2)︱measured at identical VCC, temperature and voltage levels. Note 5: Flatness is defined as the difference between the maximum and minimum value of On Resistance over the specified range of conditions. Note 6: Guaranteed by design. Note 7: Off Isolation = 20 log10 [VCOM/VNO/NC]. Note 8: TA = +25, f = 1 MHz, Capacitance is characterized but not tested in production. Q ________________________________________________________________________ http://www.union-ic.com Rev.09 Dec.2014 4/11 UM2268/UM2268A Typical Operating Characteristics ( TA=+25℃. Unless otherwise noted. ) NC RDSON NO RDSON NC RON vs. VCOM(Temp) NO RON vs. VCOM(Temp) NC RON vs. VCOM(Temp) NO RON vs. VCOM(Temp) ________________________________________________________________________ http://www.union-ic.com Rev.09 Dec.2014 5/11 UM2268/UM2268A Typical Operating Characteristics (Continued) (TA=+25℃. Unless otherwise noted. ) NC RON vs. VCOM(Temp) NO RON vs. VCOM(Temp) Logic Threshold vs. Supply Voltage Bandwidth Crosstalk Off Isolation ________________________________________________________________________ http://www.union-ic.com Rev.09 Dec.2014 6/11 UM2268/UM2268A Test Circuits tRISE=2.5ns NC V+ COM NO V+ tFALL=2.5ns CL RS 90% INPUT-IN RL 10% VOH IN VCC/2 10% GND VOUT 90% VCC/2 90% 90% OUTPUT-VOUT GND VOL tON GND tOFF Test Circuit 1. Switching Timing (tON, tOFF) VCC NC V+ NO VCC V+ COM VOUT CL* IN Control Input RL tr=tf=2.5ns(10-90%) 50% 0V VOUT 0.9*VOUT GND Control Input tBBM CL* includes fixture and stray capacitance Test Circuit 2. Break-Before-Make Timing Network Analyzer RS COM VIN IN=0V/VCC RT VS GND Vsel NO/NC GND GND VOUT GND GND Off-isolation=20Log(VOUT/VIN) RT GND Test Circuit 3. Off-Isolation ________________________________________________________________________ http://www.union-ic.com Rev.09 Dec.2014 7/11 UM2268/UM2268A Network Analyzer RS NC/NO VIN IN=0V/VCC VS GND Vsel GND RT GND GND NC/NO VOUT RS and RT are functions of the application environment (50, 75 or 100) RT GND GND Crosstalk=20Log(VOUT/VIN) Test Circuit 4. Channel-to-Channel Crosstalk Network Analyzer RS COM VIN IN=0V/VCC VS GND Vsel GND NC/NO GND VOUT RT GND GND Test Circuit 5. Bandwidth Generator VS RS VCC VIN NC/NO Input-Vsel COM VOUT Off On Off 0V CL* GND IN ΔVOUT GND VOUT Vsel CL* includes fixture and stray capacitance Q=ΔVOUT*CL GND Test Circuit 6. Charge Injection Test ________________________________________________________________________ http://www.union-ic.com Rev.09 Dec.2014 8/11 UM2268/UM2268A Package Information UM2268 QFN10 1.8×1.4 Outline Drawing DIMENSIONS b D L1 PIN 1 IDENTIFICATION e E L Symbol MILLIMETERS Min Typ Max Min Typ Max A 0.50 0.55 0.60 0.020 0.022 0.024 A1 0.00 - 0.05 0.00 - 0.002 A3 BOTTOM VIEW 0.15REF 0.006REF b 0.15 0.20 0.25 0.006 0.008 0.010 D 1.35 1.40 1.45 0.054 0.056 0.058 E 1.75 1.80 1.85 0.07 0.072 0.074 A TOP VIEW INCHES A3 A1 e SIDE VIEW 0.40BSC 0.016BSC L 0.30 0.40 0.50 0.012 0.016 0.020 L1 0.40 0.50 0.60 0.016 0.020 0.024 Land Pattern 1.70 9×0.563 0.663 0.40 2.10 1 NOTES: 1. Compound dimension: 1.80×1.40; 2. Unit: mm 3. General tolerance ±0.05mm unless otherwise specified; 4. The layout is just for reference. 10×0.225 Tape and Reel Orientation AE M ________________________________________________________________________ http://www.union-ic.com Rev.09 Dec.2014 9/11 UM2268/UM2268A UM2268A QFN10 2.1×1.6 Outline Drawing DIMENSIONS b e D L L1 E 0.8 Symbol 0.3 Top View A Bottom View Side View INCHES Typ Max Min Typ Max A 0.50 0.55 0.60 0.020 0.022 0.024 A1 0.00 - 0.05 0.00 - 0.002 A3 0.15REF 0.006REF b 0.20 0.25 0.30 0.008 0.010 0.012 D 2.05 2.10 2.15 0.082 0.084 0.086 E 1.55 1.60 1.65 0.062 0.064 0.066 e A3 A1 MILLIMETERS Min 0.50BSC 0.020BSC L 0.35 0.40 0.45 0.014 0.016 0.018 L1 0.40 0.45 0.50 0.016 0.018 0.020 Land Pattern 1.62 0.11 1.12 0.35 0.56 0.50 0.25 NOTES: 1. Compound dimension: 2.10×1.60; 2. Unit: mm; 3.General tolerance ±0.05mm unless otherwise specified; 4. The layout is just for reference. Tape and Reel Orientation AL M ________________________________________________________________________ http://www.union-ic.com Rev.09 Dec.2014 10/11 UM2268/UM2268A IMPORTANT NOTICE The information in this document has been carefully reviewed and is believed to be accurate. Nonetheless, this document is subject to change without notice. Union assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the contained information, or to notify a person or organization of any update. Union reserves the right to make changes, at any time, in order to improve reliability, function or design and to attempt to supply the best product possible. Union Semiconductor, Inc Add: Unit 606, No.570 Shengxia Road, Shanghai 201210 Tel: 021-51093966 Fax: 021-51026018 Website: www.union-ic.com ________________________________________________________________________ http://www.union-ic.com Rev.09 Dec.2014 11/11