High bandwidth, small size, and durability for confident connections.

Model 72943
SMA PLUG STRAIGHT CRIMP, RG58
Model 72943 SMA PLUG STRAIGHT CRIMP, RG58
High bandwidth, small size, and
durability for confident
connections.
Features
•
DC – 12.4 GHz on flexible cable.
•
Meets MIL-C-39012, IEC 169-15, CECC 22110.
•
Small size and durability for mobile
communications.
•
Precision machined and gold-plated for low loss.
Materials
•
•
•
•
•
Body is machined brass with gold plating.
Center Contacts - Plug is gold plated brass and
Jack is gold plated Beryllium copper.
Insulators are high quality PTFE.
Crimp Ferrules are copper with gold or nickel
plating.
Gaskets are silicone rubber.
Ordering Information
Model: 72943
Description: SMA PLUG STRAIGHT CRIMP, RG58
USA: Sales: 800-490-2361
Technical Support: [email protected]
Fax: 425-446-5844
Europe: 31-(0) 40 2675 150
International: 425-446-5500
Where to Buy: www.pomonaelectronics.com
Specifications
Impedance
50 Ω
Frequency Range
0-12.4 GHz on flexible
cable
Working Voltage
< 500 Vpeak
Dielectric Withstanding
Voltage
1,000 Vrms
VSWR
1.35 max.
Center/Outer Contact
Resistance
0.003/0.002 Ω max
Insulation resistance
> 5000 MΩ
Number of Insertions
500 cycles minimum
Temperature Range
-65˚ C to 165˚ C, -85˚ F to
329˚ F
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm),
.xxx = ± .005” (.127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks
are the property of their respective companies.
D2003384 REV 001
Copyright © 2007 10/10/2007 Page 1 of 2
Model 72943
SMA PLUG STRAIGHT CRIMP, RG58
Cable Types and Crimp Die Information
Connector
Model #
72943
Cable
Groups
RG58
Crimp Die Cavity Size for
Outer Ferrule
.213 (5.4)
Cable Assembly Instructions
USA: Sales: 800-490-2361
Technical Support: [email protected]
Fax: 425-446-5844
Europe: 31-(0) 40 2675 150
International: 425-446-5500
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (.51 mm),
.xxx = ± .005” (.127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks
are the property of their respective companies.
D2003384 REV 001
Copyright © 2007 10/10/2007 Page 2 of 2