Model 6733, 6734 - Pomona Electronics

Model 6733, 6734
Test Lead Wire with Silicone or PVC Insulation
Features

Same wire as used with the Pomona test
leads and patch cords.

Make your own “Extra Long” test leads,
jumpers or patch cords.

Fits Pomona “Do-It-Yourself” banana plugs
and jacks.

High temperature and voltage ratings.

Silicone insulation with high wire strand
count allows for superb flexibility.

Wear indication with double insulated (dual
extruded) silicone leads shows white inner
layer for increased safety.

Wire will comply with International Safety
Standard CAT III, IEC61010-031
requirements when correctly terminated
with other components designed to meet
CAT III, IEC61010-031 requirements.
Specifications:
Insulation:
Length:
Wire size:
Wire:
Diameter (OD):
Temperature:
Wire Rated Voltage:
Current:
6733
6734
Silicone
50 FT (15,2 meters)
18 AWG
192 X 41 bare copper
.144” (3,60mm)
-58° to +302°F (-50° to +150°C)
10,000 DC *
20 A
PVC
50 FT (15,2 meters)
18 AWG
65 X 36 tinned copper
.144” (3,60mm)
-4° to +221°F (-20° to +105°C)
5,000 DC *
15 A
6733-0
6733-2
6734-0
6734-2
Ordering Information:
Black Wire:
Red Wire:
* Hands free testing in controlled voltage environment: For CE compliance: not intended for hand held use at
voltages above 30 Vrms /42.2 Vpk / 60 Vdc or when current exceeds 8A maximum.
USA:
Sales: 800-490-2361
Technical Support: [email protected]
Fax: 425-446-5844
Europe: 31-(0) 40 2675 150 International: 425-446-5500
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks are
the property of their respective companies.
Copyright © 2012
D1100092 Rev. 101
Page 1 of 1