Model 6344 Basic Electronic Test Lead Kit FEATURES: Test accessories comply with IEC 61010-031 requirements Extended slide on tip adapter fits directly over probe, allowing testing of hard to reach test points Wear indication with double insulated (dual extruded) silicone leads shows white inner layer for increased safety Compatible with most Fluke, Amprobe, H.P., Tektronic & Wavetek digital multimeters MATERIALS: Model 6365: Probe Body: Outer Insulation – Santoprene® Rubber, Color: Gray, Inner Insulation – Polypropylene Fire Retardant, Color: One Black, One Red, Tip: Brass, Wire: 18 AWG, 192 x 41 bare copper, Silicone Insulation, O.D. 0.144” (3,66mm), Length: 48" (122cm) Banana Plug: Body – Brass, Nickel Plated, Spring – Beryllium Copper, Nickel Plated, Insulation – Polypropylene, Color: One Black, One Red, RATINGS: IEC 61010-031, CAT III, 1000 V (with protective cap), CAT II 1000 V (without protective cap). Current: 10 Amperes Model 6264: Body – Steel, Nickel Plated, Insulation – Polypropylene fire retardant, Spring: Music Wire, RATINGS: IEC 61010-031, Category III, Operating Voltage: 300 V, Current: 3 Amperes. Model 6262: Tip: Stainless Steel, Tip Insulation: Kynar, Body: Polypropylene fire retardant, RATINGS: IEC 61010-031, Category II, Operating Voltage: 300 V, Current: 3 Amperes. ORDERING INFORMATION: 6344 (Includes a kit of items from above) Replacement P/N's: Model 6264: Probe Adapter Alligator Tip Model 6262: Probe Adapter Extended Fine Tip Model 6365: Probe to Straight DMM Plug USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2012 D1094645 Rev. 100 Page 1 of 1