Model 6264B Alligator Clip with Flex Boot for standard test probe tip, .080” (2mm) Features Redesigned to meet IEC 61010-031, the latest international safety standard for test accessories. Medium alligator jaw grips onto test terminal up to 0.3” (7.6mm) O.D. Thermoplastic body and flexible boot offers insulation protection. Alligator clip features a recessed 2mm pin tip jack at the adapter end for added insulation protection. The pin tip jack also features internal threads for added mating with the Pomona 6601 Test Probes. Adapter converts a .080” (2mm) DMM probe tip to alligator clips for ease of testing. Interfaces to Pomona’s Models 5519A, 6365, 6366, 5898 and 6601 Test Probes. Materials Alligator Clip: Jaw Insulation: Boot: Steel, nickel-plated Polypropylene Santoprene™ Ratings IEC 61010-031, Pollution Degree 2, 2000 m altitude Voltage: 1000 V CAT II / 600 V CAT III Temperature: -20°C to 55°C (-4°F to +131°F) 80% R.H. Current: 10 amperes max. Ordering Information Model: 6264B (Set of one Black, one Red Alligator Clips) Medium Alligator Clips are also included in many Pomona DMM Test Lead Kits. USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2013 D2057101 Rev. 001 Page 1 of 1