Model 6574 Alligator Clip with Boot for standard test probe tip, .080” (2mm) 1000V CAT III 10A (probe not included) Features • • • Complies with International Safety Standard IEC 61010-2-031. Alligator will clip around terminals up to .30” (7.62mm) outside diameter. Attaches to standard .080” (2mm) style test probe, such as the Pomona model 5519A. Materials Alligator Clip: Nickel plated steel Boot: Santoprene rubber Ratings Operating Voltage: 1000V, Category III Current: 10 Amperes Temperature: -13º to 176º F (-25º to 80º C) Ordering Information Model: 6574-02 Model: 6574-0/10PK Model: 6574-2/10PK USA: (two alligator clips, one red boot and one black boot) (a package of 10 alligator clips and black boots) (a package of 10 alligator clips and red boots) Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2009 D1096777 Rev. 102 Page 1 of 2 Model 6574 Alligator Clip with Boot for standard test probe tip, .080” (2mm) USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2009 D1096777 Rev. 102 Page 2 of 2