Single-Channel, 5th Order, Standard Definition Video Filter Driver

BL1511B
Single-Channel, 5th Order, Standard Definition
Video Filter Driver BL1511B
Description
The BL1511B is a low-Voltage, single-channel video amplifier with integrated reconstruction filter and
input clamps. Specially suited for standard definition video signals, this device is ideal for a wide range
of television and set-top box applications.
BL1511B offers 6dB Gain rail-to-rail output driver and 5th order output reconstruction filter. It has
8MHz -3dB bandwidth and 31.25V/µs slew rate. BL1511B provides improved image quality compared
with passive LC filters and discrete drivers solution.
BL1511B can be DC-coupled or AC-coupled with input video signal, such as the output stage of DAC to
eliminate out-of-band noise. The output in BL1511B can be configured as DC or AC-coupled output.
The BL1511B is available in SC70-5(SOT-353) and SOP8 packages. It operates over an ambient
temperature range of -40℃ to +85℃.
Features
Operation Temperature Range: -40℃ to 85℃
Single channel 5th Order 8MHz (SD) Filters
Transparent Input Clamping
6dB Output Driver Gain
Rail-to-Rail Output
Input Voltage Range Includes Ground
AC or DC Coupled Inputs / Outputs
Operates from 3.3V to 5.5V Power Supply
SC70-5(SOT-353) and SOP8 Packages
ESD: pass 8kV HBM test
Applications
Cable and Satellite Set-Top Boxes
Video Amplifiers
Communications Devices
Portable and Handheld Products
Personal Video Recorders
Video on Demand, DVD Players
http://www.belling.com.cn
-1-
Total 9 Pages
BL1511B
Block Diagram
Transparent
Clamp
IN
OUT
6dB
8MHz,5th order
Pin Configuration
IN
1
8
OUT
NC
2
7
NC
NC
3
6
NC
VCC
4
5
GND
SOP8L
SOP8 Pin Description
No.
1
4
5
8
2,3,6,7
Pin Name
IN
VCC
GND
OUT
NC
Description
Signal Input
The power pad of the chip
The ground pad of the chip
Signal Output
No Connect
I/O
Input
Power
Ground
Output
Pin Name
IN
VCC
GND
OUT
Description
Signal Input
The power pad of the chip
The ground pad of the chip
Signal Output
I/O
Input
Power
Ground
Output
SOT353 Pin Description
No.
1
3
2,4
5
http://www.belling.com.cn
-2-
Total 9 Pages
BL1511B
ABSOLUTE MAXIMUM RATINGS
Parameter
Min
Max
Units
Supply Voltage VCC to GND
-0.3
6
V
Input Voltage
GND-0.3
VCC+ 0.3
V
Storage Temperature Range
-65
150
℃
Work Temperature Range
-40
85
℃
-40
85
℃
Operating Temperature Range TA
Notes:
Stress beyond above listed “Absolute Maximum Ratings” may lead permanent damage to the device.
These are stress ratings only and operations of the device at these or any other conditions beyond those
indicated in the operational sections of the specifications are not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
ORDERING INFORMATION
SPECIFIED
MODEL
PIN- PACKAGE
PACKAGE
TEMPERATURE
MARKING
RANGE
BL1511BSO
SOP8
- 40°C to +85°C
BL1511B
(1)
YWWSSSS
BL1511BST
SOT353
- 40°C to +85°C
DSSS
(2)
PACKAGE OPTION
Tape and Reel, 2500
Tape and Reel, 3000
WHERE(1):
“BL1511B” IS PRODUCTION ID
COLOUR: LASER MARKING
SIZE: 2 POINT.
“Y”stands for the last number of the product year, for example, “2” stands for the year 2012.
“WW” stands for the product week.
“SSSS” stands for the fifth to the eighth number of the lot num.
WHERE(2):
“D” IS PRODUCTION ID
COLOUR: LASER MARKING SIZE: 2 POINT.
“SSS” stands for the fourth to the sixth number of the lot num.
http://www.belling.com.cn
-3-
Total 9 Pages
BL1511B
ELECTRICAL CHARACTERISTICS
(At VCC=5V, RL = 150Ω connected to GND, VIN = 1Vpp, and CIN = 0.1µF, all outputs AC
coupled with 220µF, referenced to 400kHz, unless otherwise noted)
DC ELECTRICAL CHARACTERISTICS
PARAMETER
CONDITIONS
Iq
VIN=0.5V
TEMP
MIN TYP MAX UNITS
7
+25℃
VIN=0V, NO LOAD
395
+25℃
IIN=-3.5mA
+25℃
580
mV
670
-40 to +85℃
Input Voltage Vclamp (Vclamp)
mA
11
-40 to +85℃
VOLS
9.5
-180
-90
mV
-40 to +85℃ -261
Clamp Charge Current
Clamp Discharge Current
VIN=Vclamp-100mV
VIN=500mV
+25℃
-6
-40 to +85℃
-6.6
-5.1
0.6
+25℃
+25℃
Output Voltage High Swing
http://www.belling.com.cn
3
45
56
DC
VIN=3V, RL = 150Ω
connected to GND
-4-
µA
3.2
-40 to +85℃
PSRR
mA
dB
-40 to +85℃
44
+25℃
4.6
-40 to +85℃
4.55
4.8
Total 9 Pages
V
BL1511B
AC ELECTRICAL CHARACTERISTICS
PARAMETER
CONDITIONS
GAIN (AV)
RL = 150Ω to GND
TEMP
MIN TYP MAX UNITS
+25℃
5.6
-40 to +85℃
5.4
6
6.4
dB
6.5
BW (-0.1dB)
RL = 150Ω to GND
+25℃
6
MHz
BW (-3dB)
RL = 150Ω to GND
+25℃
8
MHz
Filter response
fIN=27MHz
+25℃
48
dB
+25℃
31.25
V/uS
+25℃
38.4
nS
+25℃
38.4
nS
+25℃
31
nS
PAL DC coupled
+25℃
0.6
PAL AC coupled
+25℃
0.88
PAL DC coupled
+25℃
0.88
PAL AC coupled
+25℃
1.6
SLEW RATE
Fall time
Rise time
D/DT
DG
DP
http://www.belling.com.cn
2V outputstep 80% to
20%
2V outputstep 80% to
20%
2V outputstep 80% to
20%
difference from 400KHz
to 6.5MHz
-5-
Total 9 Pages
%
°
BL1511B
Typical Application Diagram
The following schematic in Figure 2 is normally used for AC coupled output and DCcoupled input with DAC which has an output voltage range of 0V to 1.4V. AC coupled
output offer slightly lower power dissipation and high ESD protection ability. The
schematic in Figure 1 is also popular in design.
input
clamp
0.1uF
220uF
1 IN
CVBS
filter
OUT 8
CVBS
75 omh
75 omh
BL1511B
4
+5V
10uF
VCC
GND
5
0.1uF or 0.01uF
Figure 1
AC Coupling Application Schematic
input
clamp
220uF
1 IN
Y
filter
OUT 8
Y
75 omh
75 omh
BL1511B
4
+5V
10uF
Figure 2
http://www.belling.com.cn
VCC
GND
5
0.1uF or 0.01uF
Input DC Coupling
-6-
Output AC Coupling
Total 9 Pages
BL1511B
APPLICATION NOTE
Functional Description
BL1511B operates from a single 3.3V to 5V supply. In application, BL1511B is a fully integrated
solution for filtering and buffering SDTV signals in front of video decoder or behind video encoder. For
example, BL1511B can replace one passive LC filter and one amplifier driver at CVBS and S-video
output side in set-top box and DVD player, this solution can help you save PCB size and production cost,
it also improves video signal performance comparing with traditional design using discrete components.
BL1511B features a DC-coupled input buffer, 5-pole low-pass filter to eliminate out-of-band noise of
video encoder, and a gain of +6dB in the output amplifier to drive 75Ω load. The AC or DC-coupled
input buffer eliminates sync crush, droop, and field tilt. The output of BL1511B also can be DC-coupled
or AC-coupled.
Input Considerations
Besides AC coupling, the BL1511B inputs also can be DC-coupled. In DC coupling application, No
input coupling capacitors are needed because the amplitude of input video signal from DAC includes
ground and extends up to 1.4V, then BL1511B can be directly connected to the output of a
single-supply, current-output DAC without any external bias network. Some time, if DAC’s output level
exceeds the range of 0V to 1.4V, or BL1511B is driven by an unknown external source or a SCART
switch which has its own clamping circuit, AC coupling is needed in such applications.
Output Considerations
The BL1511B outputs can be DC-coupled or AC-coupled. When 0V is input, the BL1511B output
voltage is 395mV typically. In DC coupling design, one 75Ω resistor is used to connect BL1511B’s
output pin with external load directly, this serial back-termination resistor is used to match the
impedance of the transmission line between BL1511B and external load to cancel the signal reflection.
The BL1511B outputs can sink and source current allowing the device to be AC-coupled with external
load, in AC coupling, 220µF at least capacitor will be used in order to eliminate field tilt.
Power-Supply Bypassing and Layout
Correct power supply bypassing is very important for optimizing video performance in design. One
0.1µF and one 10µF capacitors are always used to Bypass VCC pin of BL1511B, please place these two
capacitors as close to the BL1511B output pin as possible, a large ground plane is also needed to
ensure optimum performance. The input and output termination resistors should be placed as close to the
related pin of BL1511B as possible to avoid performance degradation. The PCB traces at the output side
should have 75Ω characteristic impedance in order to match the 75Ω characteristic impedance
cable connecting external load. In design, please keep the board trace at the inputs and outputs of the
BL1511B as short as possible to minimize the parasitic stray capacitance and noise pickup.
http://www.belling.com.cn
-7-
Total 9 Pages
BL1511B
PACKAGE OUTLINE DIMENSIONS
SOP8L
SYMBOL MILLIMETER
http://www.belling.com.cn
MILLIMETER
MIN.
NOM
MAX.
A
A1
A2
A3
b
b1
c
c1
D
E
E1
e
h
L
L1
0.10
1.30
0.60
0.39
0.38
0.21
0.19
4.70
5.80
3.70
1.27BSC
0.25
0.50
1.05BSC
1.40
0.65
0.41
0.20
4.90
6.00
3.90
1.75
0.23
1.50
0.70
0.48
0.44
0.26
0.21
5.10
6.20
4.10
1.27BSC
0.50
0.80
1.05BSC
θ
0°
-8-
-
8°
Total 9 Pages
BL1511B
SC70-5(SOT-353)
http://www.belling.com.cn
-9-
Total 9 Pages