BL8065 36V Input / 5V, 3.3V, ADJ Output Linear Regulator DESCRIPTION FEATURES BL8065 is a three-terminal positive regulator with an output voltage of 5.0V and output current up to 150mA. The device features a typical output tolerance of ±3%. And its input voltage can stand a voltage as high as 36V. • • • • • • BL8065 includes high accuracy voltage reference, error amplifier, TSD circuit and output driver module. • BL8065 offers thermal shut down functions to assure the stability of chip and power system. Maximum output current up to 150mA Output voltage tolerances of ±3% over the temperature range Internal thermal over-temperature protection High input voltage (up to 36V) Low Power Consumption:100uA (Typ.) Available in plastic TO-92 and plastic TO-220 packages No external components APPLICATIONS BL8065 is available in SOT89-3,TO-92 and TO-220 power packages. • • • TYPICAL APPLICATION ELECTRICAL CHARACTERISTICS Battery Powered equipment Communication equipment Audio/Video equipment Line Regulation BL8065 6 5 Vout (V) 4 Note: Input capacitor (C1=0.33uF) and Output capacitor (C2=0.1uF) are recommended in all application circuit. Tantalum capacitor is recommended. 3 2 1 Io=1mA Io=10mA 0 0 10 20 Vin (V) www.belling.com.cn 1 30 40 BL8065 ORDERING INFORMATION BL8065 PIN CONFIGURATION 1 □ 2 □ 3 □ 4 □ 5 □ Code 1 □ 2 □ 3 □ 4 □ 5 □ Product Classification Description Temperature&Rohs: C:-40~85°C ,Pb Free Rohs Std. Package type: C3:SOT-89-3 H:TO-92 N: TO220 Packing type: TR:Tape&Reel (Standard) BG:Bag (TO-92) Output voltage: e.g. 33=3.3V 50=5.0V AD=Output adjustable Voltage accuracy: 2=±2% Blank(default)=±3% AEXX LLBYW BL8065CC3TR□□ SOT-89-3 N: Product Code XX: Output Voltage LL: LOT NO. B: FAB Code YW: Date Code Product Classification BL8065CC3BTR□□ SOT-89-3 N: Product Code XX: Output Voltage LL: LOT NO. B: FAB Code AEXX LLBYW YW: Date Code Product Classification AEXX LLBYW BL8065CHBG□□ TO-92 N: Product Code XX: Output Voltage LL: LOT NO. B: FAB Code YW: Date Code Product Classification BL8065CNBG□□ N: Product Code XX: Output Voltage LL: LOT NO. B: FAB Code AEXX LLBYW YW: Date Code GND IN OUT www.belling.com.cn 2 Ground Supply Voltage Input Output Voltage TO-220 BL8065 ABSOLUTE MAXIMUM RATING Parameter Value Max Input Voltage Max Output Current Operating Junction Temperature(Tj) Ambient Temperature(Ta) TO-92 TO-220 Power Dissipation SOT-89-3 Storage Temperature(Ts) Lead Temperature & Time 40V 150mA 150°C -40°C –85°C 0.5 W 1.0 W 0.5W -40°C -150°C 260°C, 10s Note: Exceed these limits may cause damage to the device. Exposure to absolute maximum rating conditions may affect device reliability. RECOMMENDED WORK CONDITIONS Parameter Value Input Voltage Range Operating Junction Temperature(Tj) Max 36V -20°C –85°C ELECTRICAL CHARACTERISTICS Test Conditions:Cin=0.33uF, Cout=0.1uF,TA=25°C, Unless otherwise specified. Symbol Vin Vout ΔVout ΔVout Iout(Max.) Iq ΔV/ΔT TSD θJC Parameter Conditions Min Typ Input Voltage Output Voltage Line Regulation Load Regulation Maximum Output Current Quiescent Current Temperature coefficient Over Temperature Procetion Thermal Resistor 1mA≤Iout≤40mA 7V≤Vin≤30V 1mA≤Iout≤40mA 5.3V≤Vin≤30V 7V≤Vin≤30V 1mA≤Iout≤100mA Vin-Vout=1.5V Vin-Vout=1.25V ADJ version Vin=6.5V, 25℃≤ Temp ≤85℃ Vin=6.5V, Iout=1mA TO-92 TO-220 SOT89-3 3 Unit 36 V 4.85 5.0 5.15 V 3.2 3.3 3.4 V - 200 150 0.1 10 0.15 20 mV mV mA mA uA ±100 ppm 150 - ℃ 150 10 4.5 20 Note: All test are conducted under ambient temperature 25°C and within a short period of time 20ms www.belling.com.cn Max ℃/W BL8065 BLOCK DIAGRAM Fig.1 Block Diagram EXPLANATION and THERMAL CONSIDERATION BL8065 is a series of low dropout voltage and low power consumption regulator. Its application circuit is very simple, which only needs two outside capacitors. We have to take heat dissipation into great consideration when voltage of input is high. Because in such cases, the power dissipation consumed by BL8065 is very large. BL8065 uses SOT-89-3 package type and its thermal resistance is about 20°C/W. And the copper area of application board can affect the total thermal resistance. If copper area is 5cm*5cm (two sides), the resistance is about 30°C/W. So the total thermal resistance is about 20°C/W + 30°C/W. We can decrease total thermal resistance by increasing copper area in application board. When there is no good heat dissipation copper are in PCB, the total thermal resistance will be as high as 120°C/W, then the power dissipation of BL8065 could allow on itself is less than 1W. And furthermore, BL8065 will work at junction temperature higher than 125°C under such condition and no lifetime is guaranteed. www.belling.com.cn 4 BL8065 TYPICAL PERFORMANCE CHARACTERISTICS (T=25°C unless specified.) Load Regulation 6 6.0 5 5.0 4 4.0 Vout (V) Vout (V) Line Regulation 3 2 3.0 2.0 1 Vin=7V Vin=12V Vin=30V 1.0 Io=1mA Io=10mA 0 0.0 0 10 20 30 40 0 50 100 150 Vin (V) Iout (mA) Temperature Coefficent TSD 200 250 1.35 1.30 1.30 1.25 1.25 Vout (V) Vout (V) (Thermal Shutdown) 1.35 1.20 1.20 1.15 1.15 1.10 1.10 -40 -20 0 20 40 60 80 100 120 140 0 Temperature (℃ ℃) www.belling.com.cn 50 100 Temperature (℃ ℃) 5 150 200 BL8065 PACKAGE OUTLINE Package TO-92 Device per Box 1000 Unit mm Devices per reel 1000 Unit mm Package specification: Package SOT-89-3 Package specification: www.belling.com.cn 6 BL8065 PACKAGE OUTLINE (continued) Package TO-220 Devices per reel Package specification: www.belling.com.cn 7 Unit mm