Radial Leaded PPTC Resettable Fuse : FRH 150-600MF 1. Summary (a) RoHS Compliant (Lead Free) Product (b) Applications : Wide variety of electronic equipment (c) Product Features : Low hold current Solid state, Radial leaded product ideal for up to 250V/600V (d) Operation Current : 150mA (e) Maximum Operation Voltage : 250V (f) Maximum Interrupt Voltage : 600V (g) Temperature Range : -40℃ to 85℃ 2. Agency Recognition UL : C-UL: TUV: File No. E211981 File No. E211981 File No. R50138901 3. Electrical Characteristics (23℃) Part Number FRH150-600MF Hold Trip Current Current IH, A 0.15 Max. Time Max. Max Oper. Max Int. Typical Resistance to Trip Current Voltage Voltage Power Current Time RMIN R1MAX IT, A 0.30 A 1.0 Sec 3.0 IMAX, A 3.0 VMAX, Vdc VI-MAX,V Pd, W 250 600 1.0 IH=Hold current-maximum current at which the device will not trip at 23℃ still air. IT=Trip current-minimum current at which the device will always trip at 23℃ still air. V MAX=Maximum operating voltage at which the device can withstand without damage at its rated current. VI -MAX = Maximum interrupt voltage device can withstand for short period of time. (Not for long term.) I MAX= Maximum fault current device can withstand without damage at rated voltage (V MAX). RMIN=Minimum device resistance at 23℃. R1MAX=Maximum device resistance at 23℃ 1 hour after tripping . Physical specifications: Lead material: Tin plated copper,22 AWG. Soldering characteristics:MIL-STD-202, Method 208E. Insulating coating:Flame retardant epoxy ,meet UL-94V-0 requirement. NOTE : All FRH products are designed to assist equipment to pass ITU, UL1950 or GR1089 specification. CAUTION : FRH devices are not intended for continous use of Line Voltage such as 120 VAC ~ 600VAC and above. 4. Production Dimensions (millimeter) Lead Size : 22AWG, Φ 0.65 mm Diameter Part A Number Maximum FRH150-600MF 9.0 B Maximum 12.5 C Typical 5.0 NOTE : Specification subject to change without notice. D Minimum 4.7 E Maximum 4.6 Ω 6.0 Ω 17.0 5. Thermal Derating Curve Thermal Derating Curve - FRH150-600MF Percent of Rated Hold and Trip Current 200% 150% 100% 50% 0% -40 -20 0 20 40 60 80 Ambient Temperature (C) 6. Typical Time-To-Trip at 23℃ FRH150-600MF 100 Time-to-trip (S) 10 1 0 .1 0 0 .2 0 .4 0 .6 0 .8 1 1 .2 1 .4 1 .6 1 .8 F a u lt cu rre n t (A ) NOTE : Specification subject to change without notice. 2 2 .2 2 .4 2 .6 2 .8 3 7. Material Specification Lead material：Tin plated copper, 22 AWG. Soldering characteristics:MIL-STD-202, Method 208E. Insulating coating:Flame retardant epoxy, meets UL-94V-0 requirement 8. Part Numbering and Marking System Part Marking System Part Numbering System FRH □ □ □ ─ □ □ □M F RoHS Compliant / Lead Free Special Type Maximum interrupt Voltage rating Current rating F RH6150F 17AA F RH □ □ □ □F RoHS Compliant / Lead Free Part Identification Product Family Example □ □ □ □ Date Code/Lot Number Warning: -Operation beyond the specified maximum ratings or improper use may result in damage and possible electrical arcing and/or flame. -PPTC device are intended for occasional overcurrent protection. Application for repeated overcurrent condition and/or prolonged trip are not anticipated. - Avoid contact of PPTC device with chemical solvent. Prolonged contact will damage the device performance. NOTE : Specification subject to change without notice. DIP Type Recommendations of Wave Solder Profile Lead Contained Product Per-heat： 80 ℃ ~ 110℃. Per-heat time：45 seconds ~ 90 seconds Lead Contained Solder Temperature：220℃±5℃ Dwell Time：Less than 5 seconds Lead Free Product Per-heat： 80 ℃ ~ 110℃. Per-heat time：45 seconds ~ 90 seconds Lead Free Solder Temperature：260℃±5℃ Dwell Time：Less than 5 seconds FRH Series tape and reel specifications (dimensions in millimeters) Product availability : FRH080-250VF ~ FRH180-250VF and FRH150-600VF~FRH160-600VF Dimension Description MARK Dimension Dim (mm) Tol. (mm) Carrier tape width W 18 +1.0 Hold down tape width W4 11 min 3 max Top distance between tape edges Sprocket hold position W5 9 +0.75 Sprocket hold diameter D0 4 +0.2 Abscissa to plane (straight lead) H +3.0 Abscissa to plane (kinked lead) H0 18.5 16 +1.0 Abscissa to top H1 32.2 max Overall width with lead protrusion FRH080-250F~FRH180-250F and FRH150-600F~FRH160-600F C1 45.0 max Overall width without lead protrusion FRH080-250F~FRH180-250F and FRH150-600F~FRH160-600F C2 44.3 max Lead protrusion L1 1.0 max Protrusion of cutout L 8~10 max Protrusion beyond hold-down tape l2 not specified Sprocket hold pitch P0 12.7 +0.3 Device pitch : FRH080-250VF~FRH180-250VF 12.7 + 0.3 Device pitch : FRH150-600VF~FRH160-600VF 25.4 + 0.61 0.9 max 2.0 max Type thickness t Type thickness with splice Body lateral deviation △h 0 +2.0 Body tape plane deviation △P 0 + 2.0 Ordinate to adjacent component lead FRH080-250VF~FRH180-250VF P1 3.81 +0.7 Ordinate to adjacent component lead FRH150-600VF~FRH160-600VF P1 7.62 +0.7 1 FRH Series tape and reel specifications (dimensions in millimeters) Product availability : FRH080-250VF ~ FRH180-250VF and FRH150-600VF~FRH160-600VF Dimension Description MARK Dimension Dim (mm) Tol. (mm) Lead spacing : FRH080-250VF~FRH180-250VF F 5.1 + 0.6 Lead spacing : FRH150-600VF~FRH160-600VF F 5.1 Reel width W2 56 + 1.0 max a 370 max W1 max max Reel diameter Space between flanges less device Arbor hold diameter c 54 26 Core diameter n 91 Figure 1 Taped Component Dimensions 2 +12 FRH Series tape and reel specifications (dimensions in millimeters) Product availability : FRH080-250VF ~ FRH180-250VF and FRH150-600VF~FRH160-600VF Figure 2 Reel Dimensions Standard Package P/N Pcs /Bag Reel/Tape P/N Pcs /Bag Reel/Tape FRH080-250VF 300 1500 FRH145-250VF 300 1500 FRH080-250UVF 300 1500 FRH145-250UVF 300 1500 FRH110-250VF 300 1500 FRH180-250VF 200 1200 FRH110-250UVF 300 1500 FRH180-250UVF 200 1200 FRH120-250VF 300 1500 FRH150-600VF 100 600 FRH120-250UVF 300 1500 FRH160-600VF 100 600 3