REI Datasheet MM88C29, MM88C30 Quad Single-Ended Line Driver, Dual Differential Line Driver The MM88C30 is a dual differential line driver that also performs the dual four-input AND function. The absence of a clamp diode to VCC in the input protection circuitry of the MM88C30 allows a CMOS user to interface systems operating at different voltage levels. Thus, a CMOS digital signal source can operate at a VCC voltage greater than the VCC voltage of the MM88C30 line driver. The differential output of the MM88C30 eliminates ground-loop errors. The MM88C29 is a non-inverting single-wire transmission line driver. Since the output ON resistance is a low 20Ω typ., the device can be used to drive lamps, relays, solenoids, and clock lines, besides driving data lines. Rochester Electronics Manufactured Components Rochester branded components are manufactured using either die/wafers purchased from the original suppliers or Rochester wafers recreated from the original IP. All recreations are done with the approval of the OCM. Parts are tested using original factory test programs or Rochester developed test solutions to guarantee product meets or exceeds the OCM data sheet. Quality Overview • • • • ISO-9001 AS9120 certification Qualified Manufacturers List (QML) MIL-PRF-38535 • Class Q Military • Class V Space Level Qualified Suppliers List of Distributors (QSLD) • Rochester is a critical supplier to DLA and meets all industry and DLA standards. Rochester Electronics, LLC is committed to supplying products that satisfy customer expectations for quality and are equal to those originally supplied by industry manufacturers. The original manufacturer’s datasheet accompanying this document reflects the performance and specifications of the Rochester manufactured version of this device. Rochester Electronics guarantees the performance of its semiconductor products to the original OEM specifications. ‘Typical’ values are for reference purposes only. Certain minimum or maximum ratings may be based on product characterization, design, simulation, or sample testing. © 2013 Rochester Electronics, LLC. All Rights Reserved 08272013 To learn more, please visit www.rocelec.com MM88C29 • MM88C30 Quad Single-Ended Line Driver • Dual Differential Line Driver General Description The MM88C30 is a dual differential line driver that also performs the dual four-input NAND or dual four-input AND function. The absence of a clamp diode to VCC in the input protection circuitry of the MM88C30 allows a CMOS user to interface systems operating at different voltage levels. Thus, a CMOS digital signal source can operate at a VCC voltage greater than the VCC voltage of the MM88C30 line driver. The differential output of the MM88C30 eliminates ground-loop errors. The MM88C29 is a non-inverting single-wire transmission line driver. Since the output ON resistance is a low 20Ω typ., the device can be used to drive lamps, relays, solenoids, and clock lines, besides driving data lines. Features ■ Wide supply voltage range: 3V to 15V ■ High noise immunity: 0.45 VCC (typ.) ■ Low output ON resistance: 20Ω (typ.) Ordering Code: Order Number Package Number Package Description MM88C29N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide MM88C30M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow MM88C30N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Connection Diagrams Pin Assignments for DIP MM88C29 Pin Assignments for DIP and SOIC MM88C30 Top View Top View © 2001 Fairchild Semiconductor Corporation DS005908 www.fairchildsemi.com MM88C29 • MM88C30 Quad Single-Ended Line Driver • Dual Differential Line Driver October 1987 Revised June 2001 MM88C29 • MM88C30 Logic Diagrams 1/4 MM88C29 1/2 MM88C30 www.fairchildsemi.com 2 Voltage at Any Pin (Note 2) Operating Temperature Range Storage Temperature Average Current at Output −0.3V to VCC +16V −40°C to +85°C 500 mW 260°C Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. Except for “Operating Temperature Range” they are not meant to imply that the devices should be operated at these limits. The Electrical Characteristics tables provide conditions for actual device operation. 3V to 15V Absolute Maximum VCC 150°C (Soldering, 10 seconds) 700 mW Small Outline 25 mA Lead Temperature Power Dissipation (PD) Operating VCC Range 50 mA MM88C29 Maximum Junction Temperature, Tj −65°C to +150°C Dual-In-Line MM88C30 18V Note 2: AC Parameters are guaranteed by DC correlated testing. DC Electrical Characteristics Min/Max limits apply across temperature range unless otherwise noted Symbol Parameter Conditions Min Typ Max Units CMOS TO CMOS VIN(1) VIN(0) Logical “1” Input Voltage Logical “0” Input Voltage VCC = 5V 3.5 V VCC = 10V 8 V VCC = 5V 1.5 V VCC = 10V 2 V 1 µA 100 mA IIN(1) Logical “1” Input Current VCC = 15V, VIN = 15V IIN(0) Logical “0” Input Current VCC = 15V, VIN = 0V ICC Supply Current VCC = 5V 0.005 −1 −0.005 0.05 µA OUTPUT DRIVE ISOURCE ISINK Output Source Current VOUT = VCC − 1.6V, VCC ≥ 4.75V, Tj = 25°C −47 −80 mA Tj = 85°C −32 −60 mA MM88C29 VOUT = VCC − 0.8V −2 −20 mA MM88C30 VCC ≥ 4.5V Tj = 25°C 9.5 22 mA Tj = 85°C 8 18 mA Tj = 25°C 19 40 mA Tj = 125°C 15.5 33 mA Output Sink Current VOUT = 0.4V, VCC = 4.75V, VOUT = 0.4V, VCC = 10V, ISOURCE ISINK Output Source Resistance Output Sink Resistance VOUT = VCC − 1.6V, VCC ≥ 4.75V, Tj = 25°C 20 34 Ω Tj = 85°C 27 50 Ω Tj = 25°C 18 41 Ω Tj = 85°C 22 50 Ω Tj = 25°C 10 21 Ω Tj = 85°C 12 26 Ω VOUT = 0.4V, VCC = 4.75V, VOUT = 0.4V, VCC = 10V, Output Resistance Temperature Coefficient θJA Source 0.55 Sink 0.40 %/°C 150 °C/W Thermal Resistance %/°C (N-Package) 3 www.fairchildsemi.com MM88C29 • MM88C30 Absolute Maximum Ratings(Note 1) MM88C29 • MM88C30 AC Electrical Characteristics (Note 2) TA = 25°C, CL = 50 pF Symbol tpd Parameter Logical “1” or “0” MM88C29 MM88C30 tpd CPD Min Typ Max Units (See Figure 1) VCC = 5V 80 200 ns VCC = 10V 35 100 ns VCC = 5V 110 350 ns VCC = 10V 50 150 ns Differential Propagation Delay RL = 100Ω, CL = 5000 pF Time to Logical “1” or “0” (See Figure 2) MM88C30 CIN Conditions Propagation Delay Time to VCC = 5V 400 ns VCC = 10V 150 ns Input Capacitance MM88C29 (Note 3) 5.0 pF MM88C30 (Note 3) 5.0 pF MM88C29 (Note 3) 150 pF MM88C30 (Note 3) 200 pF Power Dissipation Capacitance Note 3: Capacitance is guaranteed by periodic testing. Note 4: CPD determines the no load AC power consumption of any CMOS device. For complete explanation see Family Characteristics application note AN-90 (CMOS Logic Databook). AC Test Circuits FIGURE 1. FIGURE 2. www.fairchildsemi.com 4 MM88C29 • MM88C30 Typical Applications Digital Data Transmission Note A: Exact value depends on line length. Note B: Optional to control response time. Note C: VCC= 4.5V to 5.5V for the DS7820, VCC=4.5V to 15V for the DS78C20. VCC is 3V to 15V. Typical Data Rate vs Transmission Line Length Note: The transmission line used was #22 gauge unshielded twisted pair (40k termination). Note: The curves generated assume that both drivers are driving equal lines, and that the maximum power is 500 mW/package. 5 www.fairchildsemi.com MM88C29 • MM88C30 Typical Performance Characteristics MM88C29 Typical Propagation Delay vs. Load Capacitance MM88C30 Typical Propagation Delay vs. Load Capacitance MM88C29 Typical Propagation Delay vs. Load Capacitance Typical Sink Current vs. Output Voltage Typical Source Current vs. Output Voltage MM88C30 Typical Propagation Delay vs. Load Capacitance www.fairchildsemi.com 6 MM88C29 • MM88C30 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A 7 www.fairchildsemi.com MM88C29 • MM88C30 Quad Single-Ended Line Driver • Dual Differential Line Driver Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 8