® SB20150CT – SB20200CT 20A HIGH VOLTAGE DUAL SCHOTTKY BARRIER RECTIFIER WON-TOP ELECTRONICS Pb Features Schottky Barrier Chip Guard Ring for Transient Protection Low Forward Voltage Drop Low Power Loss, High Efficiency High Surge Current Capability Epoxy Meets UL 94V-0 Classification Ideally Suited for Use in High Frequency SMPS, Inverters and As Free Wheeling Diodes B C PIN1 2 3 D Mechanical Data A G F Case: TO-220, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 1.9 grams (approx.) Mounting Position: Any Mounting Torque: 0.6 N.m Max. Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 E P I H L Dim TO-220 Min Max A 13.90 15.90 B 9.80 10.70 C 2.54 3.43 D 3.56 4.56 E 12.70 14.73 F 0.51 0.96 G 3.55 Ø 4.09 Ø H 5.75 6.85 I 4.16 5.00 J 2.03 2.92 K 0.30 0.65 L 1.14 1.40 P 2.29 2.79 All Dimensions in mm J PIN 1 PIN 2 PIN 3 Case K Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TC = 100°C Total Device Per Diode SB20150CT SB20200CT Unit VRRM VRWM VR 150 200 V VR(RMS) 105 140 V IO 20 10 A IFSM 150 A @IF = 10A, TJ = 25°C @IF = 10A, TJ = 125°C VFM 0.92 0.82 V @TJ = 25°C @TJ = 100°C IRM 0.2 10 mA CJ 250 pF RθJA RθJC 60 2.0 °C/W TJ, TSTG -55 to +150 °C Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Forward Voltage per diode Symbol Peak Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance (Note 1) Thermal Resistance Junction to Ambient per diode Thermal Resistance Junction to Case per diode Operating and Storage Temperature Range Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. © Won-Top Electronics Co., Ltd. Revision: September, 2012 www.wontop.com 1 ® WON-TOP ELECTRONICS 20 15 10 5 Resistive or Inductive Load 0 15 Pulse Width = 300µs 1% Duty Cycle 10 TA = 125°C TA = 85°C 1.0 TA = 25°C 0 30 45 60 75 90 105 120 135 150 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 150 Single Half-Sine-Wave JEDEC Method 120 90 60 30 0 1 0.2 0.4 0.6 0.8 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 100 10 TJ = 125°C 1.0 TJ = 75°C 0.1 TJ = 25°C 0.01 0.001 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Forward Surge Current Derating Curve 500 DC, TJ = 150°C Per Diode 9 8 7 6 5 4 3 2 CJ, JUNCTION CAPACITANCE (pF) 10 PD, POWER DISSIPATION (W) 100 0.1 0 IFSM, PEAK FORWARD SURGE CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) 25 IR, INSTANTANEOUS REVERSE CURRENT (mA) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) SB20150CT – SB20200CT f = 1MHz 400 300 200 100 1 0 0 0 www.wontop.com 2 8 4 6 10 2 12 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 5 Forward Power Dissipation 1 10 100 VR, DC REVERSE VOLTAGE (V) Fig. 6 Typical Junction Capacitance 1000 © Won-Top Electronics Co., Ltd. Revision: September, 2012 ® SB20150CT – SB20200CT WON-TOP ELECTRONICS MARKING INFORMATION SB20xxCT SB20xxCT xx Polarity = Device Number = 150 or 200 = As Marked on Body PACKAGING INFORMATION BULK Tube Size L x W x H (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 525 x 31 x 6 50 555 x 145 x 95 2,000 572 x 306 x 218 8,000 19.0 Note: 1. Anti-static tube, water clear color. RECOMMENDED SCREW MOUNTING ARRANGEMENT Recommended isolated mounting when screw is at heatsink potential. 4-40 hardware is used. 4-40 PAN or HEX Head Screw Plain Washer Screw should not be tightened with any type of air-forced torque or equipment that may cause high impact on device package. The insulating bushing inside the mounting hole will insure the screw threads do not contact the metal base. The interface should apply a layer of thermal grease or a highly conductive thermal pad for better heat dissipation. © Won-Top Electronics Co., Ltd. Revision: September, 2012 Insulating Bushing Rectifier Insulator Heatsink Compression Washer 4-40 HEX Nut www.wontop.com 3 ® SB20150CT – SB20200CT WON-TOP ELECTRONICS ORDERING INFORMATION Product No. Package Type Shipping Quantity SB20150CT TO-220 50 Units/Tube SB20200CT TO-220 50 Units/Tube 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, SB20150CT-LF. WON-TOP ELECTRONICS and are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung 806, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com www.wontop.com 4 We power your everyday. © Won-Top Electronics Co., Ltd. Revision: September, 2012