MURF3020 - MURF3060 - Won-Top Electronics Co., Ltd.

®
MURF3020 – MURF3060
30A GLASS PASSIVATED SUPERFAST RECTIFIER
WON-TOP ELECTRONICS
Pb
Features

Planar Die Construction






Superfast 35nS and 50nS Recovery Time
Low Forward Voltage Drop
Low Reverse Leakage Current
Soft Recovery Characteristics
Epoxy Meets UL 94V-0 Classification
Ideally Suited for Use in High Frequency
SMPS, Inverters and As Free Wheeling Diodes
B
C





ITO-220A
Min
Max
A
14.60
15.40
B
9.70
10.30
C
2.55
2.85
D
—
4.16
E
13.00
13.80
A
G
PIN1
3
D
Mechanical Data


Dim
F
Case: ITO-220A, Full Molded Plastic
Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208
Polarity: See Diagram
Weight: 1.9 grams (approx.)
Mounting Position: Any
Mounting Torque: 0.6 N.m Max.
Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 4
E
P
I
H
L
F
0.30
0.90
G
3.00 Ø
3.50 Ø
H
6.30
6.90
I
4.20
4.80
J
2.50
2.90
K
0.36
0.80
L
2.60
3.30
P
4.83
5.33
All Dimensions in mm
PIN 1
J
PIN 3
K
Maximum Ratings and Electrical Characteristics
@TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
MURF3020
MURF3040
MURF3060
Unit
VRRM
VRWM
VR
200
400
600
V
VR(RMS)
140
280
420
V
IO
30
A
Non-Repetitive Peak Forward Surge Current 8.3ms Single Half
Sine-Wave Superimposed on Rated Load (JEDEC Method)
IFSM
325
A
Forward Voltage
@IF = 30A
VFM
@TC = 25°C
@TC = 100°C
IRM
Peak Reverse Current
At Rated DC Blocking Voltage
@TC = 110°C
Symbol
Reverse Recovery Time (Note 1)
trr
Typical Junction Capacitance (Note 2)
CJ
1.1
1.3
1.5
250
1.0
35
µA
mA
50
175
V
nS
145
pF
Thermal Resistance Junction to Ambient
Thermal Resistance Junction to Case
RθJA
RθJC
75
3.0
°C/W
RMS Isolation Voltage, t = 1 min
VISO
1500
V
TJ, TSTG
-65 to +175
°C
Operating and Storage Temperature Range
Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
© Won-Top Electronics Co., Ltd.
Revision: March, 2014
www.wontop.com
1
®
WON-TOP ELECTRONICS
24
18
12
6
Resistive or
Inductive Load
0
20
MURF3040
10
MUFR3020
MURF3060
1.0
0
40 60 80 100 120 140 160 180 200
TC, CASE TEMPERATURE (°C)
Fig. 1 Forward Current Derating Curve
400
Single Half-Sine-Wave
JEDEC Method
320
240
160
80
0
0.4
0.8
1.2
1.6
2.0
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
1000
TC = 175°C
100
10
TC = 100°C
1.0
0.1
TC = 25°C
0.01
1
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 4 Typical Reverse Characteristics
10
100
NUMBER OF CYCLES AT 60Hz
Fig. 3 Forward Surge Current Derating Curve
500
CJ, JUNCTION CAPACITANCE (pF)
50
PD, POWER DISSIPATION (W)
100
0.1
0
IFSM, PEAK FORWARD SURGE CURRENT (A)
IF, INSTANTANEOUS FORWARD CURRENT (A)
30
IR, INSTANTANEOUS REVERSE CURRENT (µA)
I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A)
MURF3020 – MURF3060
40
MURF3040
30
MURF3060
20
MURF3020
10
f = 1MHz
400
300
MURF3020 – MURF3040
200
100
MURF3060
DC, TJ = 150°C
0
0
0
www.wontop.com
2
20
30
40
10
50
IF(AV), AVERAGE FORWARD CURRENT (A)
Fig. 5 Forward Power Dissipation
0.1
1
10
VR, DC REVERSE VOLTAGE (V)
Fig. 6 Typical Junction Capacitance
100
© Won-Top Electronics Co., Ltd.
Revision: March, 2014
®
MURF3020 – MURF3060
WON-TOP ELECTRONICS
MARKING INFORMATION
MURF30xx
MURF30xx
x
Polarity
= Device Number
= 20, 40 or 60
= As Marked on Body
PACKAGING INFORMATION
BULK
Tube Size
L x W x H (mm)
Quantity
(PCS)
Inner Box Size
L x W x H (mm)
Quantity
(PCS)
Carton Size
L x W x H (mm)
Quantity
(PCS)
Approx. Gross Weight
(KG)
525 x 31 x 6
50
555 x 145 x 95
2,000
572 x 306 x 218
8,000
19.0
Note: 1. Anti-static tube, water clear color.
RECOMMENDED SCREW MOUNTING ARRANGEMENT
The full molded plastic package affords a
major reduction of hardware as compared
to a standard TO-220 package. However,
precautions should be made in mounting
procedure.
6-32 HEX Head Screw
Plain Washer
A conical washer should be used to apply
proper force to the device. Screw should
not be tightened with any type of air-forced
torque or equipment that may cause crack
on device package.
A layer of thermal grease or thermal pad in
the interface will be considerably helpful for
heat dissipation.
© Won-Top Electronics Co., Ltd.
Revision: March, 2014
Rectifier
Heatsink
Conical Washer
6-32 HEX Nut
www.wontop.com
3
®
MURF3020 – MURF3060
WON-TOP ELECTRONICS
ORDERING INFORMATION
Product No.
Package Type
Shipping Quantity
MURF3020
ITO-220A
50 Units/Tube
MURF3040
ITO-220A
50 Units/Tube
MURF3060
ITO-220A
50 Units/Tube
1.
2.
Shipping quantity given is for minimum packing quantity only. For minimum
order quantity, please consult the Sales Department.
To order RoHS / Lead Free version (with Lead Free finish), add “-LF”
suffix to part number above. For example, MURF3020-LF.
WON-TOP ELECTRONICS and
are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and
believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the
purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein
without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road,
Chine Chen Dist., Kaohsiung 806, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: [email protected]
Internet: http://www.wontop.com
www.wontop.com
4
We power your everyday.
© Won-Top Electronics Co., Ltd.
Revision: March, 2014