® PFS5000 – PFS5006 50A 1/2” RUGGED LEAD PRESS-FIT DIODE WON-TOP ELECTRONICS Pb Features Diffused Junction Low Leakage Low Cost High Surge Current Capability Typical IR less than 5.0µA Rugged 2.54mm Dia. Lead A Anode + Mechanical Data Case: DO-21, Copper Case and Components Hermetically Sealed Terminals: Contact Areas Readily Solderable Polarity: Cathode to Case (Reverse Units Are Available Upon Request and Are Designated By A “R” Suffix, i.e. PFS5002R or PFS5004R) Polarity: Red Color Equals Standard, Black Color Equals Reverse Polarity Mounting Position: Any Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 2 DO-21 Rugged Lead Dim Min Max C F D E A 15.77 15.97 B 12.73 12.82 C 2.54 Ø Typical D 9.55 E 5.70 5.90 F 22.55 22.85 9.85 All Dimensions in mm B Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current Unit VRRM VRWM VR 50 100 200 300 400 500 600 V VR(RMS) 35 70 140 210 280 350 420 V IO 50 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 500 A Forward Voltage @IF = 50A VFM 1.0 V @TA = 25°C @TA = 100°C IRM 5.0 500 µA CJ 400 pF RθJC 1.0 °C/W TJ, TSTG -65 to +175 °C Peak Reverse Current At Rated DC Blocking Voltage @TC = 150°C PFS5000 PFS5001 PFS5002 PFS5003 PFS5004 PFS5005 PFS5006 Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Thermal Resistance: Junction to case, single side cooled. © Won-Top Electronics Co., Ltd. Revision: April, 2012 www.wontop.com 1 ® PFS5000 – PFS5006 WON-TOP ELECTRONICS ORDERING INFORMATION Product No. Package Type Shipping Quantity PFS5000 DO-21 Rugged Lead Press-Fit 120 Units/Box PFS5001 DO-21 Rugged Lead Press-Fit 120 Units/Box PFS5002 DO-21 Rugged Lead Press-Fit 120 Units/Box PFS5003 DO-21 Rugged Lead Press-Fit 120 Units/Box PFS5004 DO-21 Rugged Lead Press-Fit 120 Units/Box PFS5005 DO-21 Rugged Lead Press-Fit 120 Units/Box PFS5006 DO-21 Rugged Lead Press-Fit 120 Units/Box 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, PFS5000-LF. WON-TOP ELECTRONICS and are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung 806, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com www.wontop.com 2 We power your everyday. © Won-Top Electronics Co., Ltd. Revision: April, 2012