SB10150DC – SB10200DC WTE POWER SEMICONDUCTORS Pb 10A HIGH VOLTAGE SURFACE MOUNT DUAL SCHOTTKY BARRIER RECTIFIER Features Schottky Barrier Chip Guard Ring Die Construction for Transient Protection Low Forward Voltage Drop Low Power Loss, High Efficiency High Surge Current Capability For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications C A J B D E PIN 1 2 3 G H K P P D2 PAK/TO-263 Min Max Mechanical Data Dim A 9.80 10.40 B 9.60 10.60 C 4.40 4.80 D 8.50 9.10 E 2.80 — G 1.00 1.40 H — 0.90 J 1.20 1.40 K 0.30 0.70 P 2.35 2.75 All Dimensions in mm 2 Case: D PAK/TO-263, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 1.7 grams (approx.) Mounting Position: Any Marking: Type Number Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 PIN 1 PIN 3 - Maximum Ratings and Electrical Characteristics + Case, PIN 2 @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current SB10150DC SB10200DC Unit VRRM VRWM VR 150 200 V VR(RMS) 105 140 V IO 10 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 150 A Forward Voltage @IF = 5.0A VFM 0.92 V @TA = 25°C @TA = 100°C IRM 0.5 50 mA Cj 600 pF RθJC 3.0 °C/W Tj, TSTG -65 to +150 °C Peak Reverse Current At Rated DC Blocking Voltage @TC = 100°C Symbol Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Thermal resistance junction to case mounted on heatsink. SB10150DC – SB10200DC 1 of 4 © 2008 Won-Top Electronics 30 Single Phase Half-Wave 60 Hz Resistive or Inductive Load 9.5mm Lead Length 15 10 5 0 10 50 100 150 IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE OUTPUT CURRENT (A) 20 10 1.0 Tj = 25ºC Pulse Width = 300µs 2% Duty Cycle 0.1 0.1 0.5 0.7 0.9 1.1 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Voltage Characteristics TC, CASE TEMPERATURE (ºC) Fig. 1 Forward Current Derating Curve 10000 Tj = 25ºC f = 1MHz Cj, JUNCTION CAPACITANCE (pF) 200 IFSM , PEAK FORWARD SURGE CURRENT (A) 0.3 160 120 1000 80 40 8.3ms Single Half Sine-Wave JEDEC Method 0 1 10 100 1.0 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance NUMBER OF CYCLES AT 60 Hz Fig. 3 Peak Forward Surge Current SB10150DC – SB10200DC 100 0.1 2 of 4 © 2008 Won-Top Electronics 100 MARKING INFORMATION RECOMMENDED FOOTPRINT 0.33 (8.38) 0.12 (3.05) WTE SB10xxDC 0.08 (2.032) 0.42 (10.66) 0.24 (6.096) 0.04 (1.016) WTE SB10xxDC xx Polarity = Manufacturer’s Logo = Device Number = 150 or 200 = As Marked on Body 0.63 (17.02) inches(mm) PACKAGING INFORMATION TAPE & REEL Direction of Unreeling 16mm 330mm 24mm 4mm 1.6mm 24mm Product ID Label Reel Diameter (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 330 800 340 x 337 x 45 800 370 x 370 x 420 6,400 15.0 Note: 1. Paper reel, white or gray color. 2. Components are packed in accordance with EIA standard 481-1 and 481-2. SB10150DC – SB10200DC 3 of 4 © 2008 Won-Top Electronics ORDERING INFORMATION Product No. SB10150DC-T3 SB10200DC-T3 1. 2. Package Type Shipping Quantity 2 800/Tape & Reel 2 800/Tape & Reel D PAK D PAK Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, SB10150DC-T3-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com We power your everyday. SB10150DC – SB10200DC 4 of 4 © 2008 Won-Top Electronics