® SB4020DC – SB40100DC 40A SURFACE MOUNT DUAL SCHOTTKY BARRIER RECTIFIER WON-TOP ELECTRONICS Pb Features Low Forward Voltage Epitaxial Construction with Oxide Passivation Guard Ring for Transient and ESD Protection Surge Overload Rating to 250A Peak Low Power Loss, High Efficiency Fast Switching For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Switching Power Supplies C A J B E D PIN 1 2 3 G H K P P 2 D PAK/TO-263 Dim Min Max Mechanical Data Case: D2PAK/TO-263, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 1.7 grams (approx.) Mounting Position: Any Marking: Type Number Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 A 9.80 10.40 B 9.60 10.60 C 4.40 4.80 PIN 1 D 8.50 9.10 PIN 3 E — 2.80 G 1.00 1.40 Case, PIN 2 H — 0.99 J 1.20 1.40 K 0.30 0.70 P 2.35 2.75 All Dimensions in mm Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TC = 100°C Total Device Per Diode SB SB SB SB SB SB SB SB 4020DC 4030DC 4040DC 4045DC 4050DC 4060DC 4080DC 40100DC Unit VRRM VRWM VR 20 30 40 45 50 60 80 100 V VR(RMS) 14 21 28 32 35 42 56 70 V IO 40 20 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 250 A Forward Voltage per diode @IF = 20A, TJ = 25°C @IF = 20A, TJ = 125°C VFM Peak Reverse Current At Rated DC Blocking Voltage IRM @TJ = 25°C @TJ = 100°C Typical Junction Capacitance (Note 1) Thermal Resistance Junction to Ambient (Note 2) Thermal Resistance Junction to Case (Note 2) Operating and Storage Temperature Range CJ 0.70 0.60 0.75 0.65 0.85 0.75 1.0 20 1100 V mA 650 pF RθJA RθJC 50 1.5 °C/W TJ, TSTG -55 to +150 °C Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Mounted on FR-4 PCB with minimum recommended pad layout per diode. © Won-Top Electronics Co., Ltd. Revision: September, 2012 www.wontop.com 1 ® WON-TOP ELECTRONICS 40 30 20 10 Resistive or Inductive Load 0 15 Pulse Width = 300µs 1% Duty Cycle TJ = 25°C 10 4020DC – 4045DC 4050DC – 4060DC 4080DC – 40100DC 1.0 0 30 45 60 75 90 105 120 135 150 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 250 Single Half-Sine-Wave JEDEC Method 200 150 100 50 0 1 0.2 0.4 0.6 0.8 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 100 10 TJ = 125°C TJ = 100°C 1.0 0.1 TJ = 25°C 0.01 0.001 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Forward Surge Current Derating Curve 3000 DC, TJ = 150°C Per Diode 18 16 14 12 4080DC – 40100DC 10 4050DC – 4060DC 8 4020DC – 4045DC 6 4 CJ, JUNCTION CAPACITANCE (pF) 20 PD, POWER DISSIPATION (W) 100 0.1 0 IFSM, PEAK FORWARD SURGE CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) 50 IR, INSTANTANEOUS REVERSE CURRENT (mA) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) SB4020DC – SB40100DC f = 1MHz 2400 1800 4020DC – 4045DC 1200 4050DC – 40100DC 600 2 0 0 0 www.wontop.com 2 5 10 15 20 25 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 5 Forward Power Dissipation 0.1 1 10 VR, DC REVERSE VOLTAGE (V) Fig. 6 Typical Junction Capacitance 100 © Won-Top Electronics Co., Ltd. Revision: September, 2012 ® SB4020DC – SB40100DC WON-TOP ELECTRONICS MARKING INFORMATION RECOMMENDED FOOTPRINT 0.33 (8.38) 0.12 (3.05) SB40xxDC 0.08 (2.032) 0.42 (10.66) 0.24 (6.096) 0.04 (1.016) SB40xxDC xx Polarity = Device Number = 20, 30, 40, 45, 50, 60, 80 or 100 = As Marked on Body 0.63 (17.02) inches(mm) PACKAGING INFORMATION TAPE & REEL Direction of Unreeling 16mm 330mm 24mm 4mm 1.6mm 24mm Product ID Label Reel Diameter (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 330 800 340 x 337 x 45 800 370 x 370 x 420 6,400 15.0 Note: 1. Paper reel, white or gray color. 2. Components are packed in accordance with EIA standard 481-1 and 481-2. © Won-Top Electronics Co., Ltd. Revision: September, 2012 www.wontop.com 3 ® SB4020DC – SB40100DC WON-TOP ELECTRONICS ORDERING INFORMATION Product No. SB4020DC-T3 SB4030DC-T3 SB4040DC-T3 SB4045DC-T3 SB4050DC-T3 SB4060DC-T3 SB4080DC-T3 SB40100DC-T3 1. 2. Package Type Shipping Quantity 2 800/Tape & Reel 2 800/Tape & Reel 2 800/Tape & Reel 2 800/Tape & Reel 2 800/Tape & Reel 2 800/Tape & Reel 2 800/Tape & Reel 2 800/Tape & Reel D PAK D PAK D PAK D PAK D PAK D PAK D PAK D PAK Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, SB4020DC-T3-LF. WON-TOP ELECTRONICS and are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung 806, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com www.wontop.com 4 We power your everyday. © Won-Top Electronics Co., Ltd. Revision: September, 2012