® SK22 – S210 2.0A SURFACE MOUNT SCHOTTKY BARRIER DIODE WON-TOP ELECTRONICS Pb Features Low Forward Voltage Epitaxial Construction with Oxide Passivation Guard Ring for Transient and ESD Protection Surge Overload Rating to 50A Peak A Low Power Loss Fast Switching Ideally Suited for Use in High Frequency SMPS, Inverters and As Free Wheeling Diodes B D F C H G E Mechanical Data SMB/DO-214AA Min Max Dim Case: SMB/DO-214AA, Molded Plastic Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026 Polarity: Cathode Band or Cathode Notch Marking: Type Number Weight: 0.093 grams (approx.) Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 A 3.30 3.94 B 4.06 4.70 C 1.91 2.11 D 0.152 0.305 E 5.08 5.59 F 2.13 2.44 G 0.051 0.203 H 0.76 1.27 All Dimensions in mm Maximum Ratings @TA=25°C unless otherwise specified Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) Symbol SK22 SK23 SK24 SK25 SK26 SK28 SK29 S210 Unit VRRM VRWM VR 20 30 40 50 60 80 90 100 V VR(RMS) 14 21 28 35 42 56 63 70 V IO 2.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 50 A Forward Voltage @IF = 2.0A VFM @TJ = 25°C @TJ = 100°C IRM Peak Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance (Note 2) Thermal Resistance, Junction to Ambient (Note 1) Thermal Resistance, Junction to Lead (Note 1) Operating Temperature Range Storage Temperature Range 0.50 100 80 24 -55 to +125 pF °C/W -55 to +150 -55 to +150 V mA 150 RθJA RθJL TSTG 0.85 0.5 10 CJ TJ 0.70 °C °C Note: 1. Mounted on FR-4 PCB with 8.0 x 8.0mm copper pads. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. © Won-Top Electronics Co., Ltd. Revision: September, 2012 www.wontop.com 1 ® 2.0 SK25 – S210 1.5 SK22 – SK24 1.0 0.5 Resistive or Inductive Load 0 10 TA = 25°C SK25 – SK26 1.0 SK22 – SK24 SK28 – S210 0.1 Pulse Width = 300µs 1% Duty Cycle 0.01 0 IFSM, PEAK FORWARD SURGE CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) WON-TOP ELECTRONICS 2.5 15 0 30 45 60 75 90 105 120 135 150 TL, LEAD TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 50 IR, INSTANTANEOUS REVERSE CURRENT (mA) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) SK22 – S210 Single Half-Sine-Wave JEDEC Method 40 30 20 10 0 0.2 0.4 0.6 0.8 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 100 10 TJ = 125°C 1.0 TJ = 75°C 0.1 0.01 TJ = 25°C 0.001 1 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Forward Surge Current Derating Curve 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics CJ, JUNCTION CAPACITANCE (pF) 250 f = 1MHz 200 150 SK22 – SK26 100 SK28 – S210 50 0 0.1 www.wontop.com 2 1 10 VR, DC REVERSE VOLTAGE (V) Fig. 5 Typical Junction Capacitance 100 © Won-Top Electronics Co., Ltd. Revision: September, 2012 ® SK22 – S210 WON-TOP ELECTRONICS MARKING INFORMATION RECOMMENDED FOOTPRINT 0.050 MIN (1.27 MIN) SK2x Cathode SK2x x 0.082 MIN (2.10 MIN) = Polarity Band = Device Number Except S210 = 2, 3, 4, 5, 6, 8 or 9 0.106 MAX (2.69 MAX) inches(mm) PACKAGING INFORMATION TAPE & REEL Direction of Unreeling 8mm 330mm 12mm 1.6mm 4mm 12mm Product ID Label Reel Diameter (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 330 3,000 340 x 337 x 45 6,000 370 x 370 x 420 48,000 14.0 Note: 1. Paper reel, white or gray color. 2. Components are packed in accordance with EIA standard 481-1 and 481-2. © Won-Top Electronics Co., Ltd. Revision: September, 2012 www.wontop.com 3 ® SK22 – S210 WON-TOP ELECTRONICS ORDERING INFORMATION Product No. Package Type Shipping Quantity SK22-T3 SMB 3000/Tape & Reel SK23-T3 SMB 3000/Tape & Reel SK24-T3 SMB 3000/Tape & Reel SK25-T3 SMB 3000/Tape & Reel SK26-T3 SMB 3000/Tape & Reel SK28-T3 SMB 3000/Tape & Reel SK29-T3 SMB 3000/Tape & Reel S210-T3 SMB 3000/Tape & Reel 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, SK22-T3-LF. WON-TOP ELECTRONICS and are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung 806, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com www.wontop.com 4 We power your everyday. © Won-Top Electronics Co., Ltd. Revision: September, 2012