DB ELECTRIC DOUBLE LAYER CAPACITORS “DYNACAP” 5.5V Standard Capacitor Series DB GREEN CAP 70℃ Small-sized, large capacity, excellent voltage holding. For all ratings, uniform 5mm pitch of terminal spacing. Wider temperature range (-25 to +70℃) than battery. 21.5×7.5 size can encase up to 1.5F. Ideal for backing up of CMOS’s, IC’s, microcomputers, RAM’s, RTC’s and the like used in Video’s, tuners, TV sets, telephone sets and others. Marking color:White print on an indigo sleeve ■ SPECIFICATIONS Item Performance Category Temperature Range 25℃~+70℃ Tolerance at rated capacitance 20%~+80% Internal resistance at 1 kHz Characteristics at high and low temperature Rated capacitance (F) 0.047 0.1 0.22 0.33 0.47 0.47 1.0 1.5 Internal resistance () 120 75 75 75 75 (13.5) 30 ((21.5) 30 30 Percentage of capacitance change Internal resistance Less than five times of the value at 20 20℃ Test time Endurance (70℃) Within ±30% of the value at 20℃ 1000 hours Percentage of capacitance change Internal resistance Within 30% of the initial measured value Within four times of the initial specified value Shelf life (70℃) Test time:1000 hours; Same as endurance. Applicable standards Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) ■ OUTLINE DRAWING ■ STANDARD RATINGS Unit:mm Max. operating voltage (V) Rated capacitance (F) ELNA Parts No. DL (mm) 5.5 0.047 DB-5R5D473T 13.57.5 5.5 0.1 DB-5R5D104T 13.57.5 5.5 0.22 DB-5R5D224T 13.57.5 5.5 0.33 DB-5R5D334T 13.57.5 5.5 0.47 DB-5R5D474ST 13.57.5 5.5 0.47 DB-5R5D474T 21.58.0 5.5 1.0 DB-5R5D105T 21.58.0 5.5 1.5 DB-5R5D155T 21.58.0 Part numbering system (example : 5.5V0.1F) DB Series code ─ 5R5 D 104 □ Rated voltage symbol Terminal code Rated capacitance symbol Additional symbol T Part number is refer to above table. 32 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.