4 3 2 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. DO NOT SCALE DRAWING 1 REVISIONS DATE 1/9/12 DESCRIPTION REV C ECN #3732 ENGR R HERRON D D 3.26 2X .13 THRU MOUNTING SCREW HOLE (MOUNTING SCREWS SUPPPLIED WITH STRAIN RELIEF) 4.76 2X .19 THRU FOR ACCESS TO OPTIONAL KEYING PIN MOUNTING SCREWS .544 C C 105.13 4.14 GROUND LUG LOCATION #6 GROUND SCREW PROVIDED 57.14 2.25 B B 19.05 .75 128.02 5.04 CUSTOMER DRAWING A A VIRGINIA PANEL CORPORATION WWW.VPC.COM 2. MATERIALS: FRAME: ALUMINUM ALLOY - POWDER COATED MOUNTING HARDWARE: STAINLESS STEEL WIRE TIES: NYLON 1. FOR APPLICATION USE & CARE INFORMATION CONSULT VPC USERS GUIDE @WWW.VPC.COM NOTES: 4 3 DIMENSIONS ARE SHOWN AS: [MILLIMETERS] INCHES 2 SIZE C STRAIN RELIEF RECEIVER, ICON CAGE CODE 18117 SCALE: 1:1 DWG.NO. 310113456 1 310113456 8/23/06 SHEET REV C 1 OF 1