8 7 6 5 4 3 2 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. DO NOT SCALE DRAWING 1 REVISIONS REV DESCRIPTION C ECN 08-310-0108 DATE 10/23/08 ENGR EH 84.6 3.33 D D 551.7 21.72 482.7 19.00 465.1 18.31 37.2 1.47 KEYING POSITIONS C 303.9 11.97 M3-0.5 x 6MM HEILCOIL INSERTS TYP. 80 PLCS. KEYING POSITIONS 144.5 5.69 109 4.29 133.4 5.25 B 46.7 1.84 20.3 .80 TYP. 90.2 3.55 505.9 19.92 3 80X .12 TYP. 20.3 .80 TYP. 152.4 6.00 136.9 5.39 180.3 7.10 C 92 3.62 40 1.57 266.7 10.50 392.8 15.47 92.3 3.63 266.2 10.48 74.1 2.92 OPENING 64.8 2.55 475.2 18.71 133.4 5.25 78.4 3.086 Removable Handel Indexing at 90° Increments 46.7 1.84 KEYING POSITIONS KEYING POSITIONS 152.4 6.00 136.9 5.39 B A Microswitch wire exits 64.8 2.55 180.3 7.10 B 20 .79 74.1 2.92 9.7 .38 18.2 .72 55 2.18 5X .13[3.3] M4X0.7 - 6H .13[3.3] .21[5.3] .13[3.2] M4X0.7 - 6H GROUND HOLE LOCATION .40[10.1] .32[8] KEYING PLUG INSTALLED OPEN TO INSIDE 4 PLCS. 9.5 MM AREA AROUND HOLE FREE FROM ANODIZING SPECIFICATIONS: 406.1 15.99 365.6 14.39 279.5 11.00 203 7.99 A CUSTOMER DRAWING BOTTOM VIEW SHOWN WITHOUT TORSION SHAFT COVER WEIGHT: 20.5 LBS (9.3 Kg) CONSTRUCTION: SLIDE MATERIAL: FRAME MATERIAL: LINKAGE/ HANDLE: 134.6 5.30 0 0 A 40.6 1.60 WIRING SIDE VIEW VIRGINIA PANEL CORPORATION DETAIL A SCALE 1 : 1 NICKEL PLATED STEEL ALUMINUM STAINLESS STEEL 7 Receiver 2100 G40x R&S DEFAULT KEYING POSISTIONS INSTALLED 8 PLCS. 1. FOR APPLICATION USE AND CARE INFORMATION CONSULT VPC USERS GUIDE @ WWW.VPC.COM NOTES: 8 WWW.VPC.COM DETAIL B SCALE 1 : 1 6 5 4 DIMENSIONS ARE SHOWN AS: [MILLIMETERS] INCHES 3 2 SIZE D CAGE CODE 18117 DWG.NO. SCALE: 1:2 310120126 310120126 4/25/2008 SHEET 1 REV C 1OF 1