® RT2516 2A, Low Input Voltage, Ultra-Low Dropout LDO Regulator with Enable General Description Features The RT2516 is a high performance positive voltage regulator designed for use in applications requiring ultra-low input voltage and ultra-low dropout voltage at up to 2 amperes. It operates with an input voltage as low as 1.4V, with output voltage programmable as low as 0.5V. The RT2516 features ultra low dropout, ideal for applications where output voltage is very close to input voltage. Additionally, the RT2516 has an enable pin to further reduce power dissipation while shutdown. The RT2516 provides excellent regulation over variations in line, load and temperature. The RT2516 is available in the SOP-8 (Exposed Pad) package. The output voltage can be set by an external divider depending on how the FB pin is configured. Input Voltage as Low as 1.4V Ultra-Low Dropout Voltage 400mV @ 2A Over Current Protection Over Temperature Protection 1μ μA Input Current in Shutdown Mode Enable Control RoHS Compliant and Halogen Free Applications Ordering Information RT2516 Package Type SP : SOP-8 (Exposed Pad-Option 2) Telecom/Networking Cards Motherboards/Peripheral Cards Industrial Applications Wireless Infrastructure Set Top Box Medical Equipment Notebook Computers Battery Powered Systems Pin Configurations Lead Plating System G : Green (Halogen Free and Pb Free) (TOP VIEW) NC Note : Richtek products are : RoHS compliant and compatible with the current require- 8 EN 2 VIN NC 3 GND ADJ 6 VOUT 5 NC 9 4 GND 7 ments of IPC/JEDEC J-STD-020. SOP-8 (Exposed Pad) Suitable for use in SnPb or Pb-free soldering processes. Simplified Application Circuit RT2516 VIN VIN VOUT C1 VOUT R1 C2 ADJ Chip Enable R2 EN GND Copyright © 2013 Richtek Technology Corporation. All rights reserved. DS2516-03 November 2013 is a registered trademark of Richtek Technology Corporation. www.richtek.com 1 RT2516 Marking Information RT2516GSP : Product Number RT2516 GSPYMDNN YMDNN : Date Code Functional Pin Description Pin No. Pin Name 1, 4, 5 NC 2 EN 3 VIN 6 VOUT 7 ADJ Pin Function No Internal Connection. Chip Enable (Active-High). Pulling this pin below 0.4V to turn the regulator off. The device will be enabled if this pin is left open. Connect to VIN for controlling by VIN. Power Input. For regulation at full load, the input to this pin must be between (VOUT + 0.5V) and 6V. Minimum input voltage is 1.4V. A large bulk capacitance should be placed closely to this pin to ensure that the input supply does not sag below 1.4V. A minimum of 10F ceramic capacitor should be placed directly at this pin. Output of the Regulator. A minimum of 10F capacitor should be placed directly at this pin. Feedback Voltage Input. If connected to the VOUT pin, the output voltage will be set at 0.5V. If external feedback resistors are used, the output voltage will be determined by the resistor ratio. Ground. The exposed pad must be soldered to a large PCB and connected to GND for maximum power dissipation. 8, GND 9 (Exposed pad) Function Block Diagram RSENSE VOUT VIN VPUMP - - + + ADJ VIN 0.5µA 0.5V EN VIN Thermal Shutdown VOUT + VIN - GND Reverse Voltage Shutdown Copyright © 2013 Richtek Technology Corporation. All rights reserved. www.richtek.com 2 Reference Generator is a registered trademark of Richtek Technology Corporation. DS2516-03 November 2013 RT2516 Absolute Maximum Ratings (Note 1) Supply Voltage, VIN -----------------------------------------------------------------------------------------------------Other Pins ------------------------------------------------------------------------------------------------------------------Power Dissipation, PD @ TA = 25°C SOP-8 (Exposed Pad) --------------------------------------------------------------------------------------------------Package Thermal Resistance (Note 2) SOP-8 (Exposed Pad), θJA ---------------------------------------------------------------------------------------------SOP-8 (Exposed Pad), θJC --------------------------------------------------------------------------------------------Lead Temperature (Soldering, 10 sec.) ------------------------------------------------------------------------------Junction Temperature ----------------------------------------------------------------------------------------------------Storage Temperature Range -------------------------------------------------------------------------------------------ESD Susceptibility (Note 3) HBM (Human Body Model) ---------------------------------------------------------------------------------------------CDM (Charged Device Model) ------------------------------------------------------------------------------------------ Recommended Operating Conditions 0.3V to 7V 0.3V to 7V 2.500W 40°C/W 8°C/W 260°C 150°C −65°C to 150°C 2kV 1kV (Note 4) Supply Voltage, VIN ------------------------------------------------------------------------------------------------------ 1.4V to 6V Junction Temperature Range -------------------------------------------------------------------------------------------- −40°C to 125°C Ambient Temperature Range -------------------------------------------------------------------------------------------- −40°C to 105°C Electrical Characteristics (VIN = 1.4V to 6V, IOUT = 10μA to 2A, VADJ = VOUT, −40°C ≤ TA ≤ 105°C, unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Unit Quiescent Current IQ VIN = 3.3V, IOUT = 0A -- 0.7 1.5 mA Shutdown Current ISHDN VIN = 6V, VEN = 0V -- 1.5 10 A Line Regulation VLINE IOUT = 10mA -- 0.2 0.4 %/V Load Regulation VLOAD IOUT = 10mA to 2A -- 0.5 1.5 % IOUT = 1A, VIN 1.6V -- 120 200 IOUT = 1A, 1.4V < VIN < 1.6V -- -- 400 IOUT = 1.5A, VIN 1.6V -- 180 300 IOUT = 1.5A, 1.4V < VIN < 1.6V -- -- 500 IOUT = 2A, VIN 1.6V -- 240 400 IOUT = 2A, 1.4V < VIN < 1.6V -- -- 600 2.3 3 4.4 VIN = 3.3V, VADJ = VOUT, IOUT = 10mA, TA = 25C 0.495 -- 0.505 VIN = 3.3V, VADJ = VOUT, IOUT = 10mA 0.4925 -- 0.5075 -- 20 200 Dropout Voltage Current Limit VDROP ILIM VIN = 3.3V mV A Feedback ADJ Reference Voltage ADJ Pin Current VREF IADJ VADJ = 0.5V Copyright © 2013 Richtek Technology Corporation. All rights reserved. DS2516-03 November 2013 V nA is a registered trademark of Richtek Technology Corporation. www.richtek.com 3 RT2516 Parameter Symbol Test Conditions Min Typ Max Unit -- 1 10 A Enable EN Pin Current IEN VEN = 0V, V IN = 6V Logic-High VIH VIN = 3.3V 1.6 -- -- Logic-Low VIL VIN = 3.3V -- -- 0.4 OTP Trip Level -- 160 -- °C Hysteresis -- 30 -- °C EN Threshold Voltage V Over Temperature Protection Note 1. Stresses beyond those listed “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions may affect device reliability. Note 2. θJA is measured in the natural convection (air flow = 0 ft/min) at TA = 25°C on a highly thermal conductive four-layer test board of JEDEC 51-7 thermal measurement standard. The test board size is 75.6mm x 114.3mm (3"x4.5") with 1.6mm thickness FR4 refer to JEDEC 51 standard. The test board exist four-layer copper, 2oz. (0.07mm) thickness. The case point of θJC is on the expose pad for SOP-8 (Exposed Pad) package. The copper area of top copper plane is about 100mm 2 . Note 3. Devices are ESD sensitive. Handling precaution is recommended. Note 4. The device is not guaranteed to function outside its operating conditions. Copyright © 2013 Richtek Technology Corporation. All rights reserved. www.richtek.com 4 is a registered trademark of Richtek Technology Corporation. DS2516-03 November 2013 RT2516 Typical Application Circuit RT2516 3 VIN VIN VOUT 6 C1 10µF Chip Enable VOUT = 0.5(R1+R2) R2 2 November 2013 ADJ 7 EN C2 10µF R2 GND 8, 9 (Exposed Pad) (V) Copyright © 2013 Richtek Technology Corporation. All rights reserved. DS2516-03 VOUT R1 is a registered trademark of Richtek Technology Corporation. www.richtek.com 5 RT2516 Typical Operating Characteristics Quiescent Current vs. Temperature Reference Voltage vs. Temperature 1.15 0.520 Quiescent Current (mA) Reference Voltage (V) 0.515 0.510 0.505 VIN = 5V 0.500 VIN = 3.3V 0.495 0.490 0.95 VIN = 5V 0.75 VIN = 3.3V 0.55 0.485 VOUT = 2.52V 0.35 0.480 -50 -25 0 25 50 75 100 -50 125 -25 0 Shutdown Current vs. Temperature 75 100 125 UVLO vs. Temperature 1.20 1.50 1.05 1.40 Rising 1.30 VIN = 5V UVLO (V) Shutdown Current (µA)1 50 Temperature (°C) Temperature (°C) 0.90 25 0.75 VIN = 3.3V 1.20 1.10 Falling 0.60 1.00 0.45 0.90 0.30 0.80 VEN = 5V -50 -25 0 25 50 75 100 125 -50 -25 0 Temperature (°C) Dropout Voltage vs. Load Current 50 75 100 125 EN Threshold Voltage vs. Temperature 1.3 350 EN Threshold Voltage (V) 300 Dropout Voltage (mV) 25 Temperature (°C) 125°C 250 25°C 200 150 −40°C 100 50 1.2 Rising 1.1 1.0 Falling 0.9 0.8 VOUT = 2.5V VIN = 5V 0.7 0 0 0.5 1 1.5 Load Current (A) Copyright © 2013 Richtek Technology Corporation. All rights reserved. www.richtek.com 6 2 -50 -25 0 25 50 75 100 125 Temperature (°C) is a registered trademark of Richtek Technology Corporation. DS2516-03 November 2013 RT2516 Load Transient Response Line Transient Response VOUT (20mV/Div) VIN (1V/Div) VOUT (10mV/Div) IOUT (1A/Div) VIN = 3.3V, VOUT = 2.5V, IOUT = 1A to 2A VIN = 3.3V to 4.3V, VOUT = 2.5V, IOUT = 2A Time (50μs/Div) Time (500μs/Div) Power On from EN Power Off from EN VEN (5V/Div) VEN (5V/Div) VOUT (2V/Div) VOUT (2V/Div) I IN (2A/Div) I IN (2A/Div) VIN = 3.3V, VOUT = 2.5V, IOUT = 2A VIN = 3.3V, VOUT = 2.5V, IOUT = 2A Time (250μs/Div) Time (250μs/Div) PSRR VEN Rising vs. Input Voltage 0 1.25 IOUT = 1mA IOUT = 100mA IOUT = 300mA -10 VEN Rising (V) PSRR (dB) -20 −40°C 1.20 -30 -40 -50 25°C 1.15 125°C 1.10 -60 1.05 -70 VIN = 3.25V to 3.35V, VOUT = 2.5V -80 1.00 100 1000 10000 100000 Frequency (Hz) Copyright © 2013 Richtek Technology Corporation. All rights reserved. DS2516-03 November 2013 1000000 1 2 3 4 5 6 Input Voltage (V) is a registered trademark of Richtek Technology Corporation. www.richtek.com 7 RT2516 Soft-Start Time vs. Temperature 320 Soft-Start Time (µs) 310 300 290 280 270 -50 -25 0 25 50 75 100 125 Temperature (°C) Copyright © 2013 Richtek Technology Corporation. All rights reserved. www.richtek.com 8 is a registered trademark of Richtek Technology Corporation. DS2516-03 November 2013 RT2516 Application Information The RT2516 is a low voltage, low dropout linear regulator with an external bias supply input capable of supporting an input voltage range from 1.4V to 6V with a fixed output voltage from 1V to 2V in 0.1V increments. Output Voltage Setting The RT2516 output voltage is adjustable from 1.4V to 6V via the external resistive voltage divider. The voltage divider resistors can have values of up to 800kΩ because of the very high impedance and low bias current of the sense comparator. The output voltage is set according to the following equation : VOUT = VREF 1+ R1 R2 The RT2516 is designed specifically to work with low ESR ceramic output capacitor for space saving and performance consideration. Using a ceramic capacitor with capacitance of at least 10μF and ESR larger than 1mΩ on the RT2516 output ensures stability. Nevertheless, the RT2516 can still work well with other types of output capacitors due to its wide range of stable ESR. Figure 1 shows the allowable ESR range as a function of load current for various output capacitance. Output capacitors with larger capacitance can reduce noise and improve load transient response, stability, and PSRR. The output capacitor should be located at a distance of not more than 0.5 inch from the output pin of the RT2516. Region of Stable COUT ESR vs. Load Current 100 where VREF is the reference voltage with a typical value of 0.5V. Unstable Range The RT2516 goes into sleep mode when the EN pin is in a logic low condition. In this condition, the pass transistor, error amplifier, and band gap are all turned off, reducing the supply current to only 10μA (max.). The EN pin can be directly tied to VIN to keep the part on. Current Limit The RT2516contains an independent current limit circuitry, which monitors and controls the pass transistor's gate voltage, limiting the output current to 3A (typ.). COUT ESR (Ω) 10 Chip Enable Operation 1 Stable Range 0.1 0.01 VIN = 3.3V, VOUT = 2.5V, COUT = 10μF / X7R 0.001 0.0 0.3 0.5 0.8 1.0 Load Current (A) Figure 1 CIN and COUT Selection Thermal Considerations Like any low dropout regulator, the external capacitors of the RT2516 must be carefully selected for regulator stability and performance. Using a capacitor of at least 10μF is suitable. The input capacitor must be located at a distance of not more than 0.5 inch from the input pin of the IC. Any good quality ceramic capacitor can be used. However, a capacitor with larger value and lower ESR (Equivalent Series Resistance) is recommended since it will provide better PSRR and line transient response. Thermal protection limits power dissipation in RT2516. When the operation junction temperature exceeds 160°C, the OTP circuit starts the thermal shutdown function and turns the pass element off. The pass element turns on again after the junction temperature cools by 30°C. Copyright © 2013 Richtek Technology Corporation. All rights reserved. DS2516-03 November 2013 RT2516 output voltage will be closed to zero when output short circuit occurs as shown in Figure 2. It can reduce the IC temperature and provides maximum safety to end users when output short circuit occurs. is a registered trademark of Richtek Technology Corporation. www.richtek.com 9 RT2516 VOUT ILIM ILIM＇ IOUT IC Temperature 2.8 Maximum Power Dissipation (W)1 VOUT Short to GND Four-Layer PCB 2.4 2.0 1.6 1.2 0.8 0.4 0.0 Figure 2. Short Circuit Protection when Output Short Circuit Occurs 0 25 50 75 100 125 Ambient Temperature (°C) Figure 3. Derating Curve of Maximum Power Dissipation For continuous operation, do not exceed absolute maximum junction temperature. The maximum power dissipation depends on the thermal resistance of the IC package, PCB layout, rate of surrounding airflow, and difference between junction and ambient temperature. The maximum power dissipation can be calculated by the following formula : PD(MAX) = (TJ(MAX) − TA) / θJA where TJ(MAX) is the maximum junction temperature, TA is the ambient temperature, and θJA is the junction to ambient thermal resistance. For recommended operating condition specifications, the maximum junction temperature is 125°C. The junction to ambient thermal resistance, θJA, is layout dependent. For SOP-8 (Exposed Pad) package, the thermal resistance, θJA, is 40°C/W on a standard JEDEC 51-7 four-layer thermal test board. The maximum power dissipation at TA = 25°C can be calculated by the following formula : PD(MAX) = (125°C − 25°C) / (40°C/W) = 2.500W for SOT-8 (Exposed Pad) package The maximum power dissipation depends on the operating ambient temperature for fixed T J(MAX) and thermal resistance, θJA. The derating curve in Figure 3 allows the designer to see the effect of rising ambient temperature on the maximum power dissipation. Copyright © 2013 Richtek Technology Corporation. All rights reserved. www.richtek.com 10 is a registered trademark of Richtek Technology Corporation. DS2516-03 November 2013 RT2516 Outline Dimension H A M EXPOSED THERMAL PAD (Bottom of Package) Y J X B F C I D Dimensions In Millimeters Dimensions In Inches Symbol Min Max Min Max A 4.801 5.004 0.189 0.197 B 3.810 4.000 0.150 0.157 C 1.346 1.753 0.053 0.069 D 0.330 0.510 0.013 0.020 F 1.194 1.346 0.047 0.053 H 0.170 0.254 0.007 0.010 I 0.000 0.152 0.000 0.006 J 5.791 6.200 0.228 0.244 M 0.406 1.270 0.016 0.050 X 2.100 2.500 0.083 0.098 Y 3.000 3.500 0.118 0.138 Option 2 8-Lead SOP (Exposed Pad) Plastic Package Richtek Technology Corporation 14F, No. 8, Tai Yuen 1st Street, Chupei City Hsinchu, Taiwan, R.O.C. Tel: (8863)5526789 Richtek products are sold by description only. Richtek reserves the right to change the circuitry and/or specifications without notice at any time. Customers should obtain the latest relevant information and data sheets before placing orders and should verify that such information is current and complete. Richtek cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Richtek product. Information furnished by Richtek is believed to be accurate and reliable. However, no responsibility is assumed by Richtek or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Richtek or its subsidiaries. DS2516-03 November 2013 www.richtek.com 11