SANKEN ELECTRIC CO., LTD. EU02A 1. Scope The present specifications shall apply to an EU02A. 2. Outline Type Silicon Diode Structure Resin Molded Applications High Frequency Rectification 3. Flammability UL94V-0(Equivalent) 040708 1／5 61426-01 SANKEN ELECTRIC CO., LTD. EU02A 4. Absolute maximum ratings No. Item Symbol Unit Rating 1 Transient Peak Reverse Voltage VRSM V 650 2 Peak Reverse Voltage VRM V 600 3 Average Forward Current IF(AV) A 1.0 4 Peak Surge Forward Current IFSM A 15 5 I2t Limiting Value I2t A2s 1.13 6 Junction Temperature Tj °C -40～+150 7 Storage Temperature Tstg °C -40～+150 Conditions Refer to Derating of 7 10msec. Half sinewave, one shot 1msec≤t≤10msec 5. Electrical characteristics (Ta=25°C ，unless otherwise specified) No. Item Symbol Unit Value Conditions 1 Forward Voltage Drop VF V 1.4 max. IF=1.0A 2 Reverse Leakage Current IR uA 10 max. VR=VRM 3 Reverse Leakage Current Under High Temperature H･IR uA 300 max. trr-1 ns 400 max. trr-2 ns 180 max. Rth(j-l) °C /W 20 max. 4 5 040708 Reverse Recovery Time Thermal Resistance VR=VRM, Tj=100°C IF=IRP=10mA 90% Recovery point, Tj=25°C IF=10mA, IRP=20mA 75% Recovery point, Tj=25°C Between Junction and Lead 2／5 61426-01 SANKEN ELECTRIC CO., LTD. EU02A 6. Characteristics IF(AV) - PF 2.0 Tj=150℃ PF (W) Forward Power Dissipation (W) t T 1.5 t/T=1/6 t/T=1/3,sinewave 1.0 t/T=1/2 0.5 DC 0.0 0.0 0.2 0.4 0.6 IF(AV) (A) 0.8 1.0 Average Forward Current (A) VR - P R 1.5 Tj=150℃ t 1-t/T=5/6 1 1-t/T=2/3 PR (W) Reverse Power Dissipation (W) T 1-t/T=1/2 0.5 sinewave 0 0 100 200 300 VR (V) 400 500 600 Reverse Voltage (V) 040708 3／5 61426-01 SANKEN ELECTRIC CO., LTD. EU02A 7. Derating Tl - IF(AV) VR=600(V) 1.0 DC t/T=1/6 IF(AV) (A) Average Forward Current (A) 0.8 t/T=1/3 0.6 t/T=1/2 0.4 Tj=150℃ sinewave 0.2 t T 0.0 50 100 150 Tl (°C) Lead Temperature (°C) 040708 4／5 61426-01 SANKEN ELECTRIC CO., LTD. EU02A 8. Package information 8-1 Package type, physical dimensions and material 62.3 ±0.7 5.0 ±0.2 *1 *2 *3 φ0.6 ±0.05 ※1 0.2 φ2.7 ± ※3 ※2 The allowance position of Body against the center of whole lead wire is 0.5mm(max.) The centric allowance of lead wire against center of physical body is 0.2mm(max.) The burr may exit up to 2mm from the body of lead Dimensions in mm 8-2 Appearance The body shall be clean and shall not bear any stain, rust or flaw. 8-3 Marking ① Type number：EU02A is abbreviated as カソード表示 Cathode Band ① ② U0 2A ② Lot number 1 First digit: Last digit of Year Second digit: Month From 1 to 9 for Jan. to Sep. O for Oct., N for Nov., and D for Dec. ③ Lot number 2 (ten days) ･： Top of the month ･･： Middle of month ･･･： End of month ③ 040708 5／5 61426-01