SANKEN ELECTRIC CO., LTD. RG1C １ Scope The present specifications shall apply to an RG1C. ２ Outline High Frequency Rectification Type Silicon Rectifier Diode Structure Resin Molded Applications High Frequency Rectification, etc. ３ Flammability UL94V-0(Equivalent) ４ Absolute maximum ratings No. Item Symbol Unit Rating Conditions 1 Transient Peak Reverse Voltage VRSM V 1000 2 Peak Reverse Voltage VRM V 1000 3 Average Forward Current IF(AV) A 0.7 Refer to derating curve in Section 7 4 Peak Surge Forward Current IFSM A 10 10ms. Half sine wave, one shot 5 I2t Limiting Value I2 t A2s 0.5 1ms≦t≦10ms 6 Junction Temperature Tj °C -40～+150 7 Storage Temperature Tstg °C -40～+150 ５ Electrical characteristics (Ta=25°C, unless otherwise specified) No. Item Symbol Unit Rating Conditions 1 Forward Voltage Drop VF V 3.3 max. IF=0.7A 2 Reverse Leakage Current IR µA 20 max. VR=VRM 3 Reverse Leakage Current Under High Temperature H･IR mA 250 max. trr1 ns 100 max. trr2 ns 50 max. Rth(j-c) °C/W 15 max. 4 5 Reverse Recovery Time Thermal Resistance 030108 VR=VRM, Tj=150°C IF=IRP=100mA 90% Recovery point, Tj=25°C IF=100mA,IRP=200mA 75% Recovery point ,Tj=25°C Between Junction and Lead 1／4 61426-01 SANKEN ELECTRIC CO., LTD. RG1C ６ Characteristics IF(AV) － PF 3.0 Tj=150°C Forward Power Dissipation, PF (W) t T t/T=1/6 2.0 t/T=1/3,sinewave t/T=1/2 1.0 DC 0.0 0.0 0.1 0.2 0.3 0.4 0.5 Average Forward Current, IF(AV) (A) 0.6 0.7 VR － PR Reverse Power Dissipation , PR (W) 0.3 Tj=150°C t T 0.2 1-t/T=5/6 1-t/T=2/3 0.1 1-t/T=1/2 sinewave 0 0 030108 200 400 600 Reverse Voltage, VR (V) 800 1000 2／4 61426-01 SANKEN ELECTRIC CO., LTD. RG1C ７ Derating Tl － IF(AV) 0.7 Average Forward Current, IF(AV) (A) 0.6 DC t/T=1/6 0.5 t/T=1/2 t/T=1/3 0.4 sinewave 0.3 0.2 Tj=150°C 0.1 t T 0.0 100 110 120 130 140 150 Lead Temperature, Tl (°C) 030108 3／4 61426-01 SANKEN ELECTRIC CO., LTD. RG1C ８ Package information ８-１Package type, physical dimensions and material *1 *2 *3 ±0.05 ※1 ※3 ※2 φ0.78 φ4.0 ±0.2 62.5 ±0.7 7.2 ±0.2 The allowance position of Body against the center of whole lead wire is 0.5mm(max.) The centric allowance of lead wire against center of physical body is 0.2mm(max.) The burr may exit up to 2mm from the body of lead Dimensions in mm ８-２Appearance The body shall be clean and shall not bear any stain, rust or flaw. ８-３Marking ① Type number RG1C ② Lot number 1 First digit: Last digit of Year Second digit: Month From 1 to 9 for Jan. to Sep. O for Oct., N for Nov., and D for Dec. ③ Lot number 2 (ten days) ･ Top of the month ･･ Middle of month ･･･ End of month カソード表示 Cathode MarkBand Cathode ① ② 030108 ① ③ ② ③ 4／4 61426-01