Thick Film Chip Resistor Low Ohmic RL2010J Series Thick Film Chip Resistor – Low Ohmic Features • • • • • • • Low Inductance Battery Charge Current Sensing Highly Reliable Multilayer Electrode Construction Higher Component and Equipment Reliability Excellent Performance at High Frequency Reduced Size of Final Equipment RoHS Compliant and Halogen Free Applications • For televisions, audio recorders, notebook computers, battery chargers, desktop computers and telecommunication equipment. Absolute Maximum Ratings & Characteristics Type Name RL2010 Size Tolerance Code 5025 J: ±5% Note Power Rating @70°C 3/4W MAX MAX Working Overload Voltage Voltage 200V 400V T.C.R. ppm/°C Resistance Range ±1500 0.010Ω ~ 0.018Ω (E-24) ±800 0.020Ω ~ 0.091Ω (E-24) ±200 0.10Ω ~ 0.91Ω (E-24) Rated Working Temperature -55°C~+155°C Note: ±1% is available upon request. TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com Tel: (800)-TAITRON Fax: (800)-TAITFAX (800)-824-8766 (800)-824-8329 (661)-257-6060 (661)-257-6415 Rev. A/AH Page 1 of 7 Thick Film Chip Resistor – Low Ohmic RL2010J Series Power Derating Curve Percentage of the rated dissipation (%) For resistors operate in the ambient temperature over 70°C, loading power ratio will derate in accordance with following curve. Ambient Temperature (°C) Max. dissipation of rated power as a function of the ambient temperature Soldering Condition IR Reflow soldering Wave soldering (Flow soldering) Rev. A/AH www.taitroncomponents.com Page 2 of 7 Thick Film Chip Resistor – Low Ohmic RL2010J Series Dimensions (in mm) Type Name Size Code L W H A B Average Weight RL2010 5025 5.00 ± 0.20 2.50± 0.15 0.55 ± 0.10 0.60 ± 0.25 0.50 ± 0.20 24.24 mg Marking Information Examples: 4 digits marking (±5%) R510 = 0.51 Ohm R051 = 0.051 Ohm Rev. A/AH www.taitroncomponents.com Page 3 of 7 Thick Film Chip Resistor – Low Ohmic RL2010J Series Test and Requirements Test Item Test Method Test Condition Requirement ±5% Temperature Coefficient of Resistance(T.C.R.) JIS C 5201 4.8 IEC 60115-1 4.8 -55°C~+155°C, 20°C is the reference temperature Short Time Overload JIS C 5201 4.13 IEC 60115-1 4.13 2.5 times RCWV or max. overload voltage for 5 seconds ±2.0% Insulation Resistance JIS C 5201 4.6 IEC 60115-1 4.6 Max. overload voltage for 1 minute ≥10G Voltage Proof JIS C 5201 4.7 IEC 60115-1 4.7 1.42 times RCWV (RMS) for 1 minute Substrate Bending Test JIS C 5201 4.33 IEC 60115-1 4.33 Bending once with 5 seconds for 3 mm ±1.0% Resistance to soldering heat JIS C 5201 4.18 IEC 60115 4.18 260±5°C for 10 seconds ±1.0% Leaching JIS C 5201 4.18 IEC 60115 4.18 260±5°C for 60 seconds no leaching Solderability JIS C 5201 4.17 IEC 60115-1 4.17 245±5°C for 3 seconds >95% coverage Endurance at upper category temperature JIS C 5201 4.23 IEC 60115-1 2.23.2 at +155°C for 1000 hrs ±1.5% Rapid change of temperature JIS C 5201 4.19 IEC 60115-1 4.19 -55°C~+155°C, 5 cycles ±1.0% Damp heat with load JIS 5201 4.24 Endurance JIS C 5201 4.25 IEC 60115-1 4.25.1 40±2°C, 90~95% R.H. or max. working voltage for 1000 hrs with 1.5hrs “ON” and 0.5 hrs “OFF” 70±2°C, or max. working voltage for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” Within the specification no breakdown or flashover ±3.0% ±3.0% Note: RCWV：Rated Continuous Working Voltage. RCWV= √Rated power (W) × Resistance value (R) Rev. A/AH www.taitroncomponents.com Page 4 of 7 Thick Film Chip Resistor – Low Ohmic RL2010J Series Packing Information: Carrier Tape Dimensions (in mm) Type Name A B W E F P0 P1 P2 ØD0 ØD1 T RL2010 2.8±0.2 5.5±0.2 12.0±0.3 1.75±0.1 5.5±0.05 4.0±0.1 4.0±0.1 2.0±0.05 1.5+0.1/-0 1.5+0.25/-0 Max1.2 Reel Dimensions (in mm) Reel Diameter 7” PCS per Paper Tape A B C W T 4,000 180+0/-3 60+1/-0 13.0±0.5 13.0±0.5 15.5±0.5 Carton Information PCS per Carton Carton Size (LxWxH) 192,000 400X400X200 (in mm) Rev. A/AH www.taitroncomponents.com Page 5 of 7 Thick Film Chip Resistor – Low Ohmic RL2010J Series How to Order RL 2010 J R51 - xx - RG70 Packing Code RG70: Tape and Reel, 7”reel, RoHS + Halogen Free BG: Bulk, RoHS + Halogen Free Factory Location Code Resistance Value Code (in Ohm) Letter R signifies a decimal point Resistance Tolerance J: ±5%; 1210(inch): 3.2×2.5(mm) cross to 3225 (mm) RL: Chip Resistor – Low Ohmic E-24 Series of Resistance Value xxx (code) R010 R018 R033 R056 R10 R18 R33 R56 Ω 0.010 0.018 0.033 0.056 0.10 0.18 0.33 0.56 xxx (code) R011 R020 R036 R062 R11 R20 R36 R62 Ω 0.011 0.020 0.036 0.062 0.11 0.20 0.36 0.62 xxx (code) R012 R022 R039 R068 R12 R22 R39 R68 Ω 0.012 0.022 0.039 0.068 0.12 0.22 0.39 0.68 xxx (code) R013 R024 R043 R075 R13 R24 R43 R75 Ω 0.013 0.024 0.043 0.075 0.13 0.24 0.43 0.75 xxx (code) R015 R027 R047 R082 R15 R27 R47 R82 Ω 0.015 0.027 0.047 0.082 0.15 0.27 0.47 0.82 xxx (code) R016 R030 R051 R091 R16 R30 R51 R91 Ω 0.016 0.030 0.051 0.091 0.16 0.30 0.51 0.91 Rev. A/AH www.taitroncomponents.com Page 6 of 7 Thick Film Chip Resistor – Low Ohmic RL2010J Series ow to contact us: US HEADQUARTERS 28040 WEST HARRISON PARKAWAY, VALENCIA, CA 91355-4162 Tel: (800) TAITRON (800) 824-8766 (661) 257-6060 Fax: (800) TAITFAX (800) 824-8329 (661) 257-6415 Email: [email protected] Http://www.taitroncomponents.com TAITRON COMPONENTS MEXICO, S.A .DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P. 42970 MEXICO Tel: +52-55-5560-1519 Fax: +52-55-5560-2190 TAITRON COMPONETS INCORPORATED E REPRESENTAÇÕES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAÚDE - SÃO PAULO-SP 04035-001 BRAZIL Tel: +55-11-5574-7949 Fax: +55-11-5572-0052 TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE METROBANK PLASA, 1160 WEST YAN’AN ROAD, SUITE 1502, SHANGHAI, 200052,CHINA Tel: +86-21-5424-9942 Fax: +86-21-5424-9931 Rev. A/AH www.taitroncomponents.com Page 7 of 7